| Message ID | 1389321592-33220-1-git-send-email-john.tobias.ph@gmail.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Thu, Jan 09, 2014 at 06:39:51PM -0800, John Tobias wrote: > Moved ARCH_HAS_CPUFREQ, HAVE_IMX_ANATOP and PM_OPP on ARCH_MXC so that > the user can enable the cpufreq support for iMX6Q and/or iMX6SL. All I was asking is to move the following: select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select PM_OPP if PM So leave HAVE_IMX_ANATOP out there, and only move the above ones please. Shawn > > Signed-off-by: John Tobias <john.tobias.ph@gmail.com> > --- > arch/arm/mach-imx/Kconfig | 13 ++++++------- > 1 file changed, 6 insertions(+), 7 deletions(-) > > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > index 7a6e6f7..d6aa34d 100644 > --- a/arch/arm/mach-imx/Kconfig > +++ b/arch/arm/mach-imx/Kconfig > @@ -1,5 +1,6 @@ > config ARCH_MXC > bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 > + select ARCH_HAS_CPUFREQ > select ARCH_REQUIRE_GPIOLIB > select ARM_CPU_SUSPEND if PM > select ARM_PATCH_PHYS_VIRT > @@ -9,8 +10,10 @@ config ARCH_MXC > select GENERIC_ALLOCATOR > select GENERIC_CLOCKEVENTS > select GENERIC_IRQ_CHIP > + select HAVE_IMX_ANATOP if SOC_IMX6Q || SOC_IMX6SL > select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7 > select MULTI_IRQ_HANDLER > + select PM_OPP if PM > select SOC_BUS > select SPARSE_IRQ > select USE_OF > @@ -779,16 +782,14 @@ config SOC_IMX53 > > config SOC_IMX6Q > bool "i.MX6 Quad/DualLite support" > - select ARCH_HAS_CPUFREQ > - select ARCH_HAS_OPP > + select ARCH_HAS_OPP > select ARM_ERRATA_754322 > select ARM_ERRATA_764369 if SMP > select ARM_ERRATA_775420 > select ARM_GIC > select CPU_V7 > select HAVE_ARM_SCU if SMP > - select HAVE_ARM_TWD if SMP > - select HAVE_IMX_ANATOP > + select HAVE_ARM_TWD if SMP > select HAVE_IMX_GPC > select HAVE_IMX_MMDC > select HAVE_IMX_SRC > @@ -800,8 +801,7 @@ config SOC_IMX6Q > select PINCTRL_IMX6Q > select PL310_ERRATA_588369 if CACHE_PL310 > select PL310_ERRATA_727915 if CACHE_PL310 > - select PL310_ERRATA_769419 if CACHE_PL310 > - select PM_OPP if PM > + select PL310_ERRATA_769419 if CACHE_PL310 > > help > This enables support for Freescale i.MX6 Quad processor. > @@ -812,7 +812,6 @@ config SOC_IMX6SL > select ARM_ERRATA_775420 > select ARM_GIC > select CPU_V7 > - select HAVE_IMX_ANATOP > select HAVE_IMX_GPC > select HAVE_IMX_MMDC > select HAVE_IMX_SRC > -- > 1.8.3.2 > -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
I tested leaving the HAVE_IMX_ANATOP under SOC_IMX6Q and SOC_IMX6SL. The iMX6Q cpufreq driver won't show up in menu config / gconfig and that's the reason why I added it. Regards, john On Sun, Jan 12, 2014 at 7:20 PM, Shawn Guo <shawn.guo@linaro.org> wrote: > On Thu, Jan 09, 2014 at 06:39:51PM -0800, John Tobias wrote: >> Moved ARCH_HAS_CPUFREQ, HAVE_IMX_ANATOP and PM_OPP on ARCH_MXC so that >> the user can enable the cpufreq support for iMX6Q and/or iMX6SL. > > All I was asking is to move the following: > > select ARCH_HAS_CPUFREQ > select ARCH_HAS_OPP > select PM_OPP if PM > > So leave HAVE_IMX_ANATOP out there, and only move the above ones please. > > Shawn > >> >> Signed-off-by: John Tobias <john.tobias.ph@gmail.com> >> --- >> arch/arm/mach-imx/Kconfig | 13 ++++++------- >> 1 file changed, 6 insertions(+), 7 deletions(-) >> >> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig >> index 7a6e6f7..d6aa34d 100644 >> --- a/arch/arm/mach-imx/Kconfig >> +++ b/arch/arm/mach-imx/Kconfig >> @@ -1,5 +1,6 @@ >> config ARCH_MXC >> bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 >> + select ARCH_HAS_CPUFREQ >> select ARCH_REQUIRE_GPIOLIB >> select ARM_CPU_SUSPEND if PM >> select ARM_PATCH_PHYS_VIRT >> @@ -9,8 +10,10 @@ config ARCH_MXC >> select GENERIC_ALLOCATOR >> select GENERIC_CLOCKEVENTS >> select GENERIC_IRQ_CHIP >> + select HAVE_IMX_ANATOP if SOC_IMX6Q || SOC_IMX6SL >> select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7 >> select MULTI_IRQ_HANDLER >> + select PM_OPP if PM >> select SOC_BUS >> select SPARSE_IRQ >> select USE_OF >> @@ -779,16 +782,14 @@ config SOC_IMX53 >> >> config SOC_IMX6Q >> bool "i.MX6 Quad/DualLite support" >> - select ARCH_HAS_CPUFREQ >> - select ARCH_HAS_OPP >> + select ARCH_HAS_OPP >> select ARM_ERRATA_754322 >> select ARM_ERRATA_764369 if SMP >> select ARM_ERRATA_775420 >> select ARM_GIC >> select CPU_V7 >> select HAVE_ARM_SCU if SMP >> - select HAVE_ARM_TWD if SMP >> - select HAVE_IMX_ANATOP >> + select HAVE_ARM_TWD if SMP >> select HAVE_IMX_GPC >> select HAVE_IMX_MMDC >> select HAVE_IMX_SRC >> @@ -800,8 +801,7 @@ config SOC_IMX6Q >> select PINCTRL_IMX6Q >> select PL310_ERRATA_588369 if CACHE_PL310 >> select PL310_ERRATA_727915 if CACHE_PL310 >> - select PL310_ERRATA_769419 if CACHE_PL310 >> - select PM_OPP if PM >> + select PL310_ERRATA_769419 if CACHE_PL310 >> >> help >> This enables support for Freescale i.MX6 Quad processor. >> @@ -812,7 +812,6 @@ config SOC_IMX6SL >> select ARM_ERRATA_775420 >> select ARM_GIC >> select CPU_V7 >> - select HAVE_IMX_ANATOP >> select HAVE_IMX_GPC >> select HAVE_IMX_MMDC >> select HAVE_IMX_SRC >> -- >> 1.8.3.2 >> > -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 7a6e6f7..d6aa34d 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -1,5 +1,6 @@ config ARCH_MXC bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 + select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select ARM_CPU_SUSPEND if PM select ARM_PATCH_PHYS_VIRT @@ -9,8 +10,10 @@ config ARCH_MXC select GENERIC_ALLOCATOR select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP + select HAVE_IMX_ANATOP if SOC_IMX6Q || SOC_IMX6SL select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7 select MULTI_IRQ_HANDLER + select PM_OPP if PM select SOC_BUS select SPARSE_IRQ select USE_OF @@ -779,16 +782,14 @@ config SOC_IMX53 config SOC_IMX6Q bool "i.MX6 Quad/DualLite support" - select ARCH_HAS_CPUFREQ - select ARCH_HAS_OPP + select ARCH_HAS_OPP select ARM_ERRATA_754322 select ARM_ERRATA_764369 if SMP select ARM_ERRATA_775420 select ARM_GIC select CPU_V7 select HAVE_ARM_SCU if SMP - select HAVE_ARM_TWD if SMP - select HAVE_IMX_ANATOP + select HAVE_ARM_TWD if SMP select HAVE_IMX_GPC select HAVE_IMX_MMDC select HAVE_IMX_SRC @@ -800,8 +801,7 @@ config SOC_IMX6Q select PINCTRL_IMX6Q select PL310_ERRATA_588369 if CACHE_PL310 select PL310_ERRATA_727915 if CACHE_PL310 - select PL310_ERRATA_769419 if CACHE_PL310 - select PM_OPP if PM + select PL310_ERRATA_769419 if CACHE_PL310 help This enables support for Freescale i.MX6 Quad processor. @@ -812,7 +812,6 @@ config SOC_IMX6SL select ARM_ERRATA_775420 select ARM_GIC select CPU_V7 - select HAVE_IMX_ANATOP select HAVE_IMX_GPC select HAVE_IMX_MMDC select HAVE_IMX_SRC
Moved ARCH_HAS_CPUFREQ, HAVE_IMX_ANATOP and PM_OPP on ARCH_MXC so that the user can enable the cpufreq support for iMX6Q and/or iMX6SL. Signed-off-by: John Tobias <john.tobias.ph@gmail.com> --- arch/arm/mach-imx/Kconfig | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-)