@@ -445,6 +445,10 @@
#define USB_VENDOR_ID_ILITEK 0x222a
#define USB_DEVICE_ID_ILITEK_MULTITOUCH 0x0001
+#define USB_VENDOR_ID_INTEL_0 0x8086
+#define USB_VENDOR_ID_INTEL_1 0x8087
+#define USB_DEVICE_ID_INTEL_HID_SENSOR 0x09fa
+
#define USB_VENDOR_ID_ION 0x15e4
#define USB_DEVICE_ID_ICADE 0x0132
@@ -26,6 +26,8 @@
#include <linux/hid-sensor-hub.h>
#include "hid-ids.h"
+#define HID_SENSOR_HUB_ENUM_QUIRK 0x01
+
/**
* struct sensor_hub_pending - Synchronous read pending information
* @status: Pending status true/false.
@@ -64,6 +66,7 @@ struct sensor_hub_data {
spinlock_t dyn_callback_lock;
struct mfd_cell *hid_sensor_hub_client_devs;
int hid_sensor_client_cnt;
+ unsigned long quirks;
};
/**
@@ -497,6 +500,40 @@ void sensor_hub_device_close(struct hid_sensor_hub_device *hsdev)
}
EXPORT_SYMBOL_GPL(sensor_hub_device_close);
+static __u8 *sensor_hub_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+ unsigned int *rsize)
+{
+ int index;
+ struct sensor_hub_data *sd = hid_get_drvdata(hdev);
+ unsigned char report_block[] = {
+ 0x0a, 0x16, 0x03, 0x15, 0x00, 0x25, 0x05};
+ unsigned char power_block[] = {
+ 0x0a, 0x19, 0x03, 0x15, 0x00, 0x25, 0x05};
+
+ if (!(sd->quirks & HID_SENSOR_HUB_ENUM_QUIRK)) {
+ hid_dbg(hdev, "No Enum quirks\n");
+ return rdesc;
+ }
+
+ /* Looks for power and report state usage id and force to 1 */
+ for (index = 0; index < *rsize; ++index) {
+ if (((*rsize - index) > sizeof(report_block)) &&
+ !memcmp(&rdesc[index], report_block,
+ sizeof(report_block))) {
+ rdesc[index + 4] = 0x01;
+ index += sizeof(report_block);
+ }
+ if (((*rsize - index) > sizeof(power_block)) &&
+ !memcmp(&rdesc[index], power_block,
+ sizeof(power_block))) {
+ rdesc[index + 4] = 0x01;
+ index += sizeof(power_block);
+ }
+ }
+
+ return rdesc;
+}
+
static int sensor_hub_probe(struct hid_device *hdev,
const struct hid_device_id *id)
{
@@ -520,6 +557,7 @@ static int sensor_hub_probe(struct hid_device *hdev,
return -ENOMEM;
}
hid_set_drvdata(hdev, sd);
+ sd->quirks = id->driver_data;
sd->hsdev->hdev = hdev;
sd->hsdev->vendor_id = hdev->vendor;
sd->hsdev->product_id = hdev->product;
@@ -621,6 +659,12 @@ static void sensor_hub_remove(struct hid_device *hdev)
}
static const struct hid_device_id sensor_hub_devices[] = {
+ { HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, USB_VENDOR_ID_INTEL_0,
+ USB_DEVICE_ID_INTEL_HID_SENSOR),
+ .driver_data = HID_SENSOR_HUB_ENUM_QUIRK},
+ { HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, USB_VENDOR_ID_INTEL_1,
+ USB_DEVICE_ID_INTEL_HID_SENSOR),
+ .driver_data = HID_SENSOR_HUB_ENUM_QUIRK},
{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, HID_ANY_ID,
HID_ANY_ID) },
{ }
@@ -633,6 +677,7 @@ static struct hid_driver sensor_hub_driver = {
.probe = sensor_hub_probe,
.remove = sensor_hub_remove,
.raw_event = sensor_hub_raw_event,
+ .report_fixup = sensor_hub_report_fixup,
#ifdef CONFIG_PM
.suspend = sensor_hub_suspend,
.resume = sensor_hub_resume,
This addresses regression caused by commit id "751d17e23a9f7" iio: hid-sensors: Fix power and report state. This commit removed a quirk, to change the enumeration base to 1 from 0 based on an CONFIG paramter. There was objection to add more changes under this quirk, instead suggested to add an HID quirk. But there is no easy way to add HID qurik as the reports are not properly using collection class. The solution was to use logical minimum, which is a correct way. There were changes done in firmware to address this. Unfortunately some devices, still use old FW and can't be upgraded to newer version on Linux devices as there is no FW upgrade tool available for Linux devices. So we need to fix report descriptors, for such devices. This will not have any impact, if the FW uses logical 1 as minimum. In this patch we look for usage id for "power and report state", and modify logical minimum value to 1. Background on enum: In the original HID sensor hub firmwares all Named array enums were to 0-based. But the most recent hub implemented as 1-based, because of the implementation by one of the major OS vendor. Using logical minimum for the field as the base of enum. So we add logical minimum to the selector values before setting those fields. Some sensor hub FWs already changed logical minimum from 0 to 1 to reflect this and hope every other vendor will follow. There is no easy way to add a common HID quirk for NAry elements, even if the standard specifies these field as NAry, the collection used to describe selectors is still just "logical". Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> --- drivers/hid/hid-ids.h | 4 ++++ drivers/hid/hid-sensor-hub.c | 45 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 49 insertions(+)