| Message ID | 2227259.2cNbl9uzOp@phil (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Heiko, On 06.01.2014 19:40, Heiko Stübner wrote: > This converts all boards to use the new common restart function instead > of SoC specific ones. > > The mach-s3c2416-dt board now tries to setup either a swrst- or watchdog- > reset so that it will be able to handle more s3c24xx-SoCs later on. [snip] > diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c > index 0a86953..88716fa4 100644 > --- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c > +++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c > @@ -24,6 +24,7 @@ > > #include <plat/cpu.h> > #include <plat/pm.h> > +#include <plat/watchdog-reset.h> > > #include "common.h" > > @@ -34,6 +35,14 @@ static void __init s3c2416_dt_map_io(void) > > static void __init s3c2416_dt_machine_init(void) > { > + s3c24xx_swrst_reset_of_init(); > + > +#ifdef CONFIG_SAMSUNG_WDT_RESET > + /* if no special swrst-device exists try to find a watchdog */ > + if (!s3c24xx_swrst_reset_available()) > + samsung_wdt_reset_of_init(); > +#endif Hmm... I think it would be safe to assume availability of soft reset, especially if you could move the restart code to the clock driver. Best regards, Tomasz -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Am Donnerstag, 23. Januar 2014, 19:12:04 schrieb Tomasz Figa: > Hi Heiko, > > On 06.01.2014 19:40, Heiko Stübner wrote: > > This converts all boards to use the new common restart function instead > > of SoC specific ones. > > > > The mach-s3c2416-dt board now tries to setup either a swrst- or watchdog- > > reset so that it will be able to handle more s3c24xx-SoCs later on. > > [snip] > > > diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c > > b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c index 0a86953..88716fa4 100644 > > --- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c > > +++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c > > @@ -24,6 +24,7 @@ > > > > #include <plat/cpu.h> > > #include <plat/pm.h> > > > > +#include <plat/watchdog-reset.h> > > > > #include "common.h" > > > > @@ -34,6 +35,14 @@ static void __init s3c2416_dt_map_io(void) > > > > static void __init s3c2416_dt_machine_init(void) > > { > > > > + s3c24xx_swrst_reset_of_init(); > > + > > +#ifdef CONFIG_SAMSUNG_WDT_RESET > > + /* if no special swrst-device exists try to find a watchdog */ > > + if (!s3c24xx_swrst_reset_available()) > > + samsung_wdt_reset_of_init(); > > +#endif > > Hmm... I think it would be safe to assume availability of soft reset, > especially if you could move the restart code to the clock driver. ok, so something like the following: the boards would simply use samsung_watchdog_reset, which should according to the manuals be available on all architectures. And the ccf-driver on appropriate architectures would simple replace the arm_pm_restart callback with its own SoC specific one? For the s3c2412 this also means that the clock-logic would get simplified. Like this, or do I overlook something? Thanks Heiko -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 23.01.2014 19:36, Heiko Stübner wrote: > Am Donnerstag, 23. Januar 2014, 19:12:04 schrieb Tomasz Figa: >> Hi Heiko, >> >> On 06.01.2014 19:40, Heiko Stübner wrote: >>> This converts all boards to use the new common restart function instead >>> of SoC specific ones. >>> >>> The mach-s3c2416-dt board now tries to setup either a swrst- or watchdog- >>> reset so that it will be able to handle more s3c24xx-SoCs later on. >> >> [snip] >> >>> diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c >>> b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c index 0a86953..88716fa4 100644 >>> --- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c >>> +++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c >>> @@ -24,6 +24,7 @@ >>> >>> #include <plat/cpu.h> >>> #include <plat/pm.h> >>> >>> +#include <plat/watchdog-reset.h> >>> >>> #include "common.h" >>> >>> @@ -34,6 +35,14 @@ static void __init s3c2416_dt_map_io(void) >>> >>> static void __init s3c2416_dt_machine_init(void) >>> { >>> >>> + s3c24xx_swrst_reset_of_init(); >>> + >>> +#ifdef CONFIG_SAMSUNG_WDT_RESET >>> + /* if no special swrst-device exists try to find a watchdog */ >>> + if (!s3c24xx_swrst_reset_available()) >>> + samsung_wdt_reset_of_init(); >>> +#endif >> >> Hmm... I think it would be safe to assume availability of soft reset, >> especially if you could move the restart code to the clock driver. > > ok, so something like the following: > > the boards would simply use samsung_watchdog_reset, which should according to > the manuals be available on all architectures. And the ccf-driver on > appropriate architectures would simple replace the arm_pm_restart callback > with its own SoC specific one? > > For the s3c2412 this also means that the clock-logic would get simplified. > > > Like this, or do I overlook something? Hmm, this would mean a dependency on CONFIG_SAMSUNG_WDT_RESET then. Is there a need to fall back to it on platforms which support soft reset (assuming that CCF driver would always install its restart handler on applicable platforms)? Note that you can make the restart field NULL in mach_desc in board files. Best regards, Tomasz -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Am Donnerstag, 23. Januar 2014, 19:51:34 schrieb Tomasz Figa: > On 23.01.2014 19:36, Heiko Stübner wrote: > > Am Donnerstag, 23. Januar 2014, 19:12:04 schrieb Tomasz Figa: > >> Hi Heiko, > >> > >> On 06.01.2014 19:40, Heiko Stübner wrote: > >>> This converts all boards to use the new common restart function instead > >>> of SoC specific ones. > >>> > >>> The mach-s3c2416-dt board now tries to setup either a swrst- or > >>> watchdog- > >>> reset so that it will be able to handle more s3c24xx-SoCs later on. > >> > >> [snip] > >> > >>> diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c > >>> b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c index 0a86953..88716fa4 100644 > >>> --- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c > >>> +++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c > >>> @@ -24,6 +24,7 @@ > >>> > >>> #include <plat/cpu.h> > >>> #include <plat/pm.h> > >>> > >>> +#include <plat/watchdog-reset.h> > >>> > >>> #include "common.h" > >>> > >>> @@ -34,6 +35,14 @@ static void __init s3c2416_dt_map_io(void) > >>> > >>> static void __init s3c2416_dt_machine_init(void) > >>> { > >>> > >>> + s3c24xx_swrst_reset_of_init(); > >>> + > >>> +#ifdef CONFIG_SAMSUNG_WDT_RESET > >>> + /* if no special swrst-device exists try to find a watchdog */ > >>> + if (!s3c24xx_swrst_reset_available()) > >>> + samsung_wdt_reset_of_init(); > >>> +#endif > >> > >> Hmm... I think it would be safe to assume availability of soft reset, > >> especially if you could move the restart code to the clock driver. > > > > ok, so something like the following: > > > > the boards would simply use samsung_watchdog_reset, which should according > > to the manuals be available on all architectures. And the ccf-driver on > > appropriate architectures would simple replace the arm_pm_restart > > callback with its own SoC specific one? > > > > For the s3c2412 this also means that the clock-logic would get simplified. > > > > > > Like this, or do I overlook something? > > Hmm, this would mean a dependency on CONFIG_SAMSUNG_WDT_RESET then. Is > there a need to fall back to it on platforms which support soft reset > (assuming that CCF driver would always install its restart handler on > applicable platforms)? s3c2410, s3c2440 and s3c2442 do not have the swrst facility. They always use samsung_wdt_reset. In general, I want to try establishing some sort of general restart way, as in the future one dt-board should hopefully be enough to cover all s3c24xx soc variants. > Note that you can make the restart field NULL in mach_desc in board files. As I said above, this is mainly meant for the dt-case. The legacy-board files are more or less only secondary, and the affected boards can of course then have a NULL restart handle :-) . So for this the dt-board could simply use the wdt-reset, which then gets replaced by the ccf-based reset if appropriate. Heiko -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 23.01.2014 20:02, Heiko Stübner wrote: > Am Donnerstag, 23. Januar 2014, 19:51:34 schrieb Tomasz Figa: >> On 23.01.2014 19:36, Heiko Stübner wrote: >>> Am Donnerstag, 23. Januar 2014, 19:12:04 schrieb Tomasz Figa: >>>> Hi Heiko, >>>> >>>> On 06.01.2014 19:40, Heiko Stübner wrote: >>>>> This converts all boards to use the new common restart function instead >>>>> of SoC specific ones. >>>>> >>>>> The mach-s3c2416-dt board now tries to setup either a swrst- or >>>>> watchdog- >>>>> reset so that it will be able to handle more s3c24xx-SoCs later on. >>>> >>>> [snip] >>>> >>>>> diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c >>>>> b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c index 0a86953..88716fa4 100644 >>>>> --- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c >>>>> +++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c >>>>> @@ -24,6 +24,7 @@ >>>>> >>>>> #include <plat/cpu.h> >>>>> #include <plat/pm.h> >>>>> >>>>> +#include <plat/watchdog-reset.h> >>>>> >>>>> #include "common.h" >>>>> >>>>> @@ -34,6 +35,14 @@ static void __init s3c2416_dt_map_io(void) >>>>> >>>>> static void __init s3c2416_dt_machine_init(void) >>>>> { >>>>> >>>>> + s3c24xx_swrst_reset_of_init(); >>>>> + >>>>> +#ifdef CONFIG_SAMSUNG_WDT_RESET >>>>> + /* if no special swrst-device exists try to find a watchdog */ >>>>> + if (!s3c24xx_swrst_reset_available()) >>>>> + samsung_wdt_reset_of_init(); >>>>> +#endif >>>> >>>> Hmm... I think it would be safe to assume availability of soft reset, >>>> especially if you could move the restart code to the clock driver. >>> >>> ok, so something like the following: >>> >>> the boards would simply use samsung_watchdog_reset, which should according >>> to the manuals be available on all architectures. And the ccf-driver on >>> appropriate architectures would simple replace the arm_pm_restart >>> callback with its own SoC specific one? >>> >>> For the s3c2412 this also means that the clock-logic would get simplified. >>> >>> >>> Like this, or do I overlook something? >> >> Hmm, this would mean a dependency on CONFIG_SAMSUNG_WDT_RESET then. Is >> there a need to fall back to it on platforms which support soft reset >> (assuming that CCF driver would always install its restart handler on >> applicable platforms)? > > s3c2410, s3c2440 and s3c2442 do not have the swrst facility. They always use > samsung_wdt_reset. > > In general, I want to try establishing some sort of general restart way, as in > the future one dt-board should hopefully be enough to cover all s3c24xx soc > variants. If you make SAMSUNG_WDT_RESET always selected on S3C24XX then I guess it's fine. > > >> Note that you can make the restart field NULL in mach_desc in board files. > > As I said above, this is mainly meant for the dt-case. The legacy-board files > are more or less only secondary, and the affected boards can of course then > have a NULL restart handle :-) . > > So for this the dt-board could simply use the wdt-reset, which then gets > replaced by the ccf-based reset if appropriate. OK. By the way, are there any benefits of using this software reset over watchdog reset? Maybe all S3C24xx could simply use watchdog reset and no special handling of those with swrst would be needed. Best regards, Tomasz -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thursday 23 January 2014 23:35:29 Tomasz Figa wrote: > On 23.01.2014 20:02, Heiko Stübner wrote: > > Am Donnerstag, 23. Januar 2014, 19:51:34 schrieb Tomasz Figa: > >> On 23.01.2014 19:36, Heiko Stübner wrote: > > In general, I want to try establishing some sort of general restart way, > > as in the future one dt-board should hopefully be enough to cover all > > s3c24xx soc variants. > > If you make SAMSUNG_WDT_RESET always selected on S3C24XX then I guess > it's fine. > > >> Note that you can make the restart field NULL in mach_desc in board > >> files. > > > > As I said above, this is mainly meant for the dt-case. The legacy-board > > files are more or less only secondary, and the affected boards can of > > course then have a NULL restart handle :-) . > > > > So for this the dt-board could simply use the wdt-reset, which then gets > > replaced by the ccf-based reset if appropriate. > > OK. By the way, are there any benefits of using this software reset over > watchdog reset? Maybe all S3C24xx could simply use watchdog reset and no > special handling of those with swrst would be needed. According to the manuals I looked at, all S3C24XX SoCs seem to support the watchdog reset - I'm not sure why the swrst variant was choosen for the newer ones when they were added initially. So yes in theory all of them seem to be able to use the watchdog reset. But in any case the s3c2412 will need its own handling, due to the apparent clock problem during resets (mentioned in the code and the manuals of s3c2412/s3c2413). Heiko -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 24.01.2014 09:03, Heiko Stübner wrote: > On Thursday 23 January 2014 23:35:29 Tomasz Figa wrote: >> On 23.01.2014 20:02, Heiko Stübner wrote: >>> Am Donnerstag, 23. Januar 2014, 19:51:34 schrieb Tomasz Figa: >>>> On 23.01.2014 19:36, Heiko Stübner wrote: >>> In general, I want to try establishing some sort of general restart way, >>> as in the future one dt-board should hopefully be enough to cover all >>> s3c24xx soc variants. >> >> If you make SAMSUNG_WDT_RESET always selected on S3C24XX then I guess >> it's fine. >> >>>> Note that you can make the restart field NULL in mach_desc in board >>>> files. >>> >>> As I said above, this is mainly meant for the dt-case. The legacy-board >>> files are more or less only secondary, and the affected boards can of >>> course then have a NULL restart handle :-) . >>> >>> So for this the dt-board could simply use the wdt-reset, which then gets >>> replaced by the ccf-based reset if appropriate. >> >> OK. By the way, are there any benefits of using this software reset over >> watchdog reset? Maybe all S3C24xx could simply use watchdog reset and no >> special handling of those with swrst would be needed. > > According to the manuals I looked at, all S3C24XX SoCs seem to support the > watchdog reset - I'm not sure why the swrst variant was choosen for the newer > ones when they were added initially. So yes in theory all of them seem to be > able to use the watchdog reset. > > But in any case the s3c2412 will need its own handling, due to the apparent > clock problem during resets (mentioned in the code and the manuals of > s3c2412/s3c2413). OK. So WDT by default (always selected in Kconfig) and override to SWRST in clock driver if available should work. Best regards, Tomasz -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi index c19d99c..a28d30f 100644 --- a/arch/arm/boot/dts/s3c2416.dtsi +++ b/arch/arm/boot/dts/s3c2416.dtsi @@ -35,6 +35,11 @@ #clock-cells = <1>; }; + swrst@4c000044 { + compatible = "samsung,s3c2443-swrst"; + reg = <0x4c000044 0x4>; + }; + pinctrl@56000000 { compatible = "samsung,s3c2416-pinctrl"; }; diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index bb0f653..8748fc3 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -62,6 +62,7 @@ config CPU_S3C2412 select S3C2412_COMMON_CLK select S3C2412_DMA if S3C24XX_DMA select S3C2412_PM if PM + select S3C24XX_SWRST help Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line @@ -73,6 +74,7 @@ config CPU_S3C2416 select S3C2416_PM if PM select S3C2443_COMMON_CLK select S3C2443_DMA if S3C24XX_DMA + select S3C24XX_SWRST help Support for the S3C2416 SoC from the S3C24XX line @@ -110,6 +112,7 @@ config CPU_S3C2443 select CPU_LLSERIAL_S3C2440 select S3C2443_COMMON_CLK select S3C2443_DMA if S3C24XX_DMA + select S3C24XX_SWRST help Support for the S3C2443 SoC from the S3C24XX line diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index a3b1d98..bf57d4c 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -46,6 +46,7 @@ #include <mach/regs-gpio.h> #include <plat/regs-serial.h> #include <mach/dma.h> +#include <mach/regs-s3c2443-clock.h> #include <plat/cpu.h> #include <plat/devs.h> @@ -538,9 +539,11 @@ void __init s3c2410_init_clocks(int xtal) #endif #ifdef CONFIG_CPU_S3C2412 +#define S3C2412_SWRST (S3C24XX_VA_CLKPWR + 0x30) void __init s3c2412_init_clocks(int xtal) { s3c2412_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR); + s3c24xx_swrst_reset_init(S3C2412_SWRST, true); } #endif @@ -548,6 +551,7 @@ void __init s3c2412_init_clocks(int xtal) void __init s3c2416_init_clocks(int xtal) { s3c2443_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR); + s3c24xx_swrst_reset_init(S3C2443_SWRST, false); } #endif @@ -571,6 +575,7 @@ void __init s3c2442_init_clocks(int xtal) void __init s3c2443_init_clocks(int xtal) { s3c2443_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR); + s3c24xx_swrst_reset_init(S3C2443_SWRST, false); } #endif diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c index ebe06ad..d19cc49 100644 --- a/arch/arm/mach-s3c24xx/mach-amlm5900.c +++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c @@ -246,5 +246,5 @@ MACHINE_START(AML_M5900, "AML_M5900") .init_irq = s3c2410_init_irq, .init_machine = amlm5900_init, .init_time = amlm5900_init_time, - .restart = s3c2410_restart, + .restart = s3c24xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c index e43f984..43af5fb 100644 --- a/arch/arm/mach-s3c24xx/mach-anubis.c +++ b/arch/arm/mach-s3c24xx/mach-anubis.c @@ -456,5 +456,5 @@ MACHINE_START(ANUBIS, "Simtec-Anubis") .init_machine = anubis_init, .init_irq = s3c2440_init_irq, .init_time = anubis_init_time, - .restart = s3c244x_restart, + .restart = s3c24xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c index f3ac0af..4df7f92 100644 --- a/arch/arm/mach-s3c24xx/mach-at2440evb.c +++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c @@ -217,5 +217,5 @@ MACHINE_START(AT2440EVB, "AT2440EVB") .init_machine = at2440evb_init, .init_irq = s3c2440_init_irq, .init_time = at2440evb_init_time, - .restart = s3c244x_restart, + .restart = s3c24xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c index a1323bc..6ebb026 100644 --- a/arch/arm/mach-s3c24xx/mach-bast.c +++ b/arch/arm/mach-s3c24xx/mach-bast.c @@ -617,5 +617,5 @@ MACHINE_START(BAST, "Simtec-BAST") .init_irq = s3c2410_init_irq, .init_machine = bast_init, .init_time = bast_init_time, - .restart = s3c2410_restart, + .restart = s3c24xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index d8cd88c..60030a0 100644 --- a/arch/arm/mach-s3c24xx/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -596,5 +596,5 @@ MACHINE_START(NEO1973_GTA02, "GTA02") .init_irq = s3c2442_init_irq, .init_machine = gta02_machine_init, .init_time = gta02_init_time, - .restart = s3c244x_restart, + .restart = s3c24xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c index 873e452..192b8d2 100644 --- a/arch/arm/mach-s3c24xx/mach-h1940.c +++ b/arch/arm/mach-s3c24xx/mach-h1940.c @@ -743,5 +743,5 @@ MACHINE_START(H1940, "IPAQ-H1940") .init_irq = s3c2410_init_irq, .init_machine = h1940_init, .init_time = h1940_init_time, - .restart = s3c2410_restart, + .restart = s3c24xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c index 6c1a34f..08ca9c7 100644 --- a/arch/arm/mach-s3c24xx/mach-jive.c +++ b/arch/arm/mach-s3c24xx/mach-jive.c @@ -670,5 +670,5 @@ MACHINE_START(JIVE, "JIVE") .map_io = jive_map_io, .init_machine = jive_machine_init, .init_time = jive_init_time, - .restart = s3c2412_restart, + .restart = s3c24xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c index d2b38f0..0686901 100644 --- a/arch/arm/mach-s3c24xx/mach-mini2440.c +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c @@ -694,5 +694,5 @@ MACHINE_START(MINI2440, "MINI2440") .init_machine = mini2440_init, .init_irq = s3c2440_init_irq, .init_time = mini2440_init_time, - .restart = s3c244x_restart, + .restart = s3c24xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c index 8c9fa09..a083027 100644 --- a/arch/arm/mach-s3c24xx/mach-n30.c +++ b/arch/arm/mach-s3c24xx/mach-n30.c @@ -598,7 +598,7 @@ MACHINE_START(N30, "Acer-N30") .init_machine = n30_init, .init_irq = s3c2410_init_irq, .map_io = n30_map_io, - .restart = s3c2410_restart, + .restart = s3c24xx_restart, MACHINE_END MACHINE_START(N35, "Acer-N35") @@ -609,5 +609,5 @@ MACHINE_START(N35, "Acer-N35") .init_machine = n30_init, .init_irq = s3c2410_init_irq, .map_io = n30_map_io, - .restart = s3c2410_restart, + .restart = s3c24xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c index c594071..3f4610e 100644 --- a/arch/arm/mach-s3c24xx/mach-nexcoder.c +++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c @@ -158,5 +158,5 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440") .init_machine = nexcoder_init, .init_irq = s3c2440_init_irq, .init_time = nexcoder_init_time, - .restart = s3c244x_restart, + .restart = s3c24xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c index a0d290b..3382374 100644 --- a/arch/arm/mach-s3c24xx/mach-osiris.c +++ b/arch/arm/mach-s3c24xx/mach-osiris.c @@ -438,5 +438,5 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS") .init_irq = s3c2440_init_irq, .init_machine = osiris_init, .init_time = osiris_init_time, - .restart = s3c244x_restart, + .restart = s3c24xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c index 889f7d7..228477d 100644 --- a/arch/arm/mach-s3c24xx/mach-otom.c +++ b/arch/arm/mach-s3c24xx/mach-otom.c @@ -122,5 +122,5 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1") .init_machine = otom11_init, .init_irq = s3c2410_init_irq, .init_time = otom11_init_time, - .restart = s3c2410_restart, + .restart = s3c24xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index 96fcf08..e34d8a1 100644 --- a/arch/arm/mach-s3c24xx/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c @@ -351,5 +351,5 @@ MACHINE_START(QT2410, "QT2410") .init_irq = s3c2410_init_irq, .init_machine = qt2410_machine_init, .init_time = qt2410_init_time, - .restart = s3c2410_restart, + .restart = s3c24xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index b46312a..2a3e1db 100644 --- a/arch/arm/mach-s3c24xx/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -824,5 +824,5 @@ MACHINE_START(RX1950, "HP iPAQ RX1950") .init_irq = s3c2442_init_irq, .init_machine = rx1950_init_machine, .init_time = rx1950_init_time, - .restart = s3c244x_restart, + .restart = s3c24xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c index d842f45..e3dc759 100644 --- a/arch/arm/mach-s3c24xx/mach-rx3715.c +++ b/arch/arm/mach-s3c24xx/mach-rx3715.c @@ -214,5 +214,5 @@ MACHINE_START(RX3715, "IPAQ-RX3715") .init_irq = s3c2440_init_irq, .init_machine = rx3715_init_machine, .init_time = rx3715_init_time, - .restart = s3c244x_restart, + .restart = s3c24xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c index 0a86953..88716fa4 100644 --- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c +++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c @@ -24,6 +24,7 @@ #include <plat/cpu.h> #include <plat/pm.h> +#include <plat/watchdog-reset.h> #include "common.h" @@ -34,6 +35,14 @@ static void __init s3c2416_dt_map_io(void) static void __init s3c2416_dt_machine_init(void) { + s3c24xx_swrst_reset_of_init(); + +#ifdef CONFIG_SAMSUNG_WDT_RESET + /* if no special swrst-device exists try to find a watchdog */ + if (!s3c24xx_swrst_reset_available()) + samsung_wdt_reset_of_init(); +#endif + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); s3c_pm_init(); } @@ -50,5 +59,5 @@ DT_MACHINE_START(S3C2416_DT, "Samsung S3C2416 (Flattened Device Tree)") .map_io = s3c2416_dt_map_io, .init_irq = irqchip_init, .init_machine = s3c2416_dt_machine_init, - .restart = s3c2416_restart, + .restart = s3c24xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c index c961e50..ced3557 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2410.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c @@ -124,5 +124,5 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc .init_irq = s3c2410_init_irq, .init_machine = smdk2410_init, .init_time = smdk2410_init_time, - .restart = s3c2410_restart, + .restart = s3c24xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c index cb1a0c7..fe01b32 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2413.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c @@ -140,7 +140,7 @@ MACHINE_START(S3C2413, "S3C2413") .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, .init_time = samsung_timer_init, - .restart = s3c2412_restart, + .restart = s3c24xx_restart, MACHINE_END MACHINE_START(SMDK2412, "SMDK2412") @@ -152,7 +152,7 @@ MACHINE_START(SMDK2412, "SMDK2412") .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, .init_time = samsung_timer_init, - .restart = s3c2412_restart, + .restart = s3c24xx_restart, MACHINE_END MACHINE_START(SMDK2413, "SMDK2413") @@ -164,5 +164,5 @@ MACHINE_START(SMDK2413, "SMDK2413") .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, .init_time = smdk2413_init_time, - .restart = s3c2412_restart, + .restart = s3c24xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c index 3ec6d49..c22f2f1 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2416.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c @@ -262,5 +262,5 @@ MACHINE_START(SMDK2416, "SMDK2416") .map_io = smdk2416_map_io, .init_machine = smdk2416_machine_init, .init_time = smdk2416_init_time, - .restart = s3c2416_restart, + .restart = s3c24xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c index 335fe26..d8c66b6 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2440.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c @@ -185,5 +185,5 @@ MACHINE_START(S3C2440, "SMDK2440") .map_io = smdk2440_map_io, .init_machine = smdk2440_machine_init, .init_time = smdk2440_init_time, - .restart = s3c244x_restart, + .restart = s3c24xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c index 58da97b..3cbbd4f 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2443.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c @@ -151,5 +151,5 @@ MACHINE_START(SMDK2443, "SMDK2443") .map_io = smdk2443_map_io, .init_machine = smdk2443_machine_init, .init_time = smdk2443_init_time, - .restart = s3c2443_restart, + .restart = s3c24xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c index 3d6afe7..bcc3efa 100644 --- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c +++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c @@ -157,5 +157,5 @@ MACHINE_START(TCT_HAMMER, "TCT_HAMMER") .init_irq = s3c2410_init_irq, .init_machine = tct_hammer_init, .init_time = tct_hammer_init_time, - .restart = s3c2410_restart, + .restart = s3c24xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c index 443c74e..1828b1c 100644 --- a/arch/arm/mach-s3c24xx/mach-vr1000.c +++ b/arch/arm/mach-s3c24xx/mach-vr1000.c @@ -366,5 +366,5 @@ MACHINE_START(VR1000, "Thorcom-VR1000") .init_machine = vr1000_init, .init_irq = s3c2410_init_irq, .init_time = vr1000_init_time, - .restart = s3c2410_restart, + .restart = s3c24xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c index d4ebaf4..63e627b 100644 --- a/arch/arm/mach-s3c24xx/mach-vstms.c +++ b/arch/arm/mach-s3c24xx/mach-vstms.c @@ -168,5 +168,5 @@ MACHINE_START(VSTMS, "VSTMS") .init_machine = vstms_init, .map_io = vstms_map_io, .init_time = vstms_init_time, - .restart = s3c2412_restart, + .restart = s3c24xx_restart, MACHINE_END
This converts all boards to use the new common restart function instead of SoC specific ones. The mach-s3c2416-dt board now tries to setup either a swrst- or watchdog- reset so that it will be able to handle more s3c24xx-SoCs later on. Signed-off-by: Heiko Stuebner <heiko@sntech.de> --- arch/arm/boot/dts/s3c2416.dtsi | 5 +++++ arch/arm/mach-s3c24xx/Kconfig | 3 +++ arch/arm/mach-s3c24xx/common.c | 5 +++++ arch/arm/mach-s3c24xx/mach-amlm5900.c | 2 +- arch/arm/mach-s3c24xx/mach-anubis.c | 2 +- arch/arm/mach-s3c24xx/mach-at2440evb.c | 2 +- arch/arm/mach-s3c24xx/mach-bast.c | 2 +- arch/arm/mach-s3c24xx/mach-gta02.c | 2 +- arch/arm/mach-s3c24xx/mach-h1940.c | 2 +- arch/arm/mach-s3c24xx/mach-jive.c | 2 +- arch/arm/mach-s3c24xx/mach-mini2440.c | 2 +- arch/arm/mach-s3c24xx/mach-n30.c | 4 ++-- arch/arm/mach-s3c24xx/mach-nexcoder.c | 2 +- arch/arm/mach-s3c24xx/mach-osiris.c | 2 +- arch/arm/mach-s3c24xx/mach-otom.c | 2 +- arch/arm/mach-s3c24xx/mach-qt2410.c | 2 +- arch/arm/mach-s3c24xx/mach-rx1950.c | 2 +- arch/arm/mach-s3c24xx/mach-rx3715.c | 2 +- arch/arm/mach-s3c24xx/mach-s3c2416-dt.c | 11 ++++++++++- arch/arm/mach-s3c24xx/mach-smdk2410.c | 2 +- arch/arm/mach-s3c24xx/mach-smdk2413.c | 6 +++--- arch/arm/mach-s3c24xx/mach-smdk2416.c | 2 +- arch/arm/mach-s3c24xx/mach-smdk2440.c | 2 +- arch/arm/mach-s3c24xx/mach-smdk2443.c | 2 +- arch/arm/mach-s3c24xx/mach-tct_hammer.c | 2 +- arch/arm/mach-s3c24xx/mach-vr1000.c | 2 +- arch/arm/mach-s3c24xx/mach-vstms.c | 2 +- 27 files changed, 49 insertions(+), 27 deletions(-)