diff mbox

[2/5] fix a deadlock in hotplug case

Message ID 1245723629.15520.52.camel@rzhang-dt (mailing list archive)
State Accepted
Headers show

Commit Message

Zhang Rui June 23, 2009, 2:20 a.m. UTC
On Tue, 2009-06-23 at 05:54 +0800, Bjorn Helgaas wrote:
> On Sunday 21 June 2009 09:31:15 pm Zhang Rui wrote:
> > we used to run the hotplug code in keventd_wq.
> > But when hot removing the ACPI battery device,
> > power_supply_unregister invokes flush_scheduled_work.
> > This causes a deadlock.
> > Introduce a new workqueue for hotplug in this patch.
> > http://bugzilla.kernel.org/show_bug.cgi?id=13533
> 
> Can you be specific about how the deadlock occurs?  That will
> make it easier to make sure we don't re-introduce the deadlock
> if this design is ever changed in the future.  And I will probably
> try to change this design, so this is really a self-serving
> request :-)
> 
> I suspect the deadlock is something like this:
> 
>   <user removes battery, platform generates system-level notify>
>     acpi_bus_notify
>       blocking_notifier_call_chain
>         acpi_dock_notifier_call
>           acpi_os_hotplug_execute(acpi_dock_deferred_cb, ...)
>             __acpi_os_execute(..., acpi_dock_deferred_cb, ...)
>               schedule_work(<acpi_dock_deferred_cb>)
>                 queue_work(keventd_wq, <acpi_dock_deferred_cb>)
>                   <acpi_dock_deferred_cb queued for execution in keventd_wq>
> 
>   worker_thread(keventd_wq)
>     acpi_os_execute_hp_deferred
>       acpi_dock_deferred_cb
>         dock_notify
>           hotplug_dock_devices
>             dock_remove_acpi_device
>               acpi_bus_trim
>                 acpi_bus_remove
>                   device_release_driver
>                     acpi_device_remove
>                       acpi_battery_remove
>                         sysfs_remove_battery
>                           power_supply_unregister
>                             flush_scheduled_work
>                               flush_workqueue(keventd_wq)
> 
> Now we're waiting for keventd_wq to be flushed, but it won't be
> considered flushed until acpi_os_execute_hp_deferred() completes.
> 
exactly.

> This sort of analysis is obviously way too long and too specific
> for a source code comment, but it would be nice to have it in the
> bugzilla, at least.
> 
> And maybe the changelog could mention that flush_scheduled_work()
> applies to keventd_wq, just to close the loop there.
> 
> The source code comment:
> 
> > +/* 
> > + * run the hotplug code in a seperate workqueue
> > + * to avoid the deadlock issue
> > + */
> 
> should be more specific about what "the deadlock issue" is.
> Maybe something like:
> 
>   /*
>    * We can't run hotplug code in keventd_wq because the hotplug
>    * code may call driver .remove() functions, which often use
>    * flush_scheduled_work() to wait for keventd_wq to be flushed.
>    */
> 
> And it might make more sense to put the comment where the queue
> is used, i.e., in __acpi_os_execute(), rather than at the definition.
> 
good point.
Refreshed patch attached.

we used to run the hotplug code in keventd_wq.
But when hot removing the ACPI battery device,
power_supply_unregister invokes flush_scheduled_work.
This causes a deadlock. i.e
1. When dock is unplugged, all the hotplug code is run on kevent_wq.
2. the hotplug code removes all the child devices of dock device.
3. removing the child device may invoke flush_scheduled_work
4. flush_scheduled_work waits until all the work on kevent_wq to be
   finished, while this will never be true because the hotplug code
   is running on keventd_wq...

Introduce a new workqueue for hotplug in this patch.
http://bugzilla.kernel.org/show_bug.cgi?id=13533

Tested-by: Paul Martin <pm@debian.org>
Tested-by: Vojtech Gondzala <vojtech.gondzala@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
---
 drivers/acpi/osl.c |   25 ++++++++++++++++---------
 1 file changed, 16 insertions(+), 9 deletions(-)



--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Bjorn Helgaas June 23, 2009, 9:59 p.m. UTC | #1
On Monday 22 June 2009 8:20:29 pm Zhang Rui wrote:
> On Tue, 2009-06-23 at 05:54 +0800, Bjorn Helgaas wrote:
> > On Sunday 21 June 2009 09:31:15 pm Zhang Rui wrote:
> > > we used to run the hotplug code in keventd_wq.
> > > But when hot removing the ACPI battery device,
> > > power_supply_unregister invokes flush_scheduled_work.
> > > This causes a deadlock.
> > > Introduce a new workqueue for hotplug in this patch.
> > > http://bugzilla.kernel.org/show_bug.cgi?id=13533
> > 
> > Can you be specific about how the deadlock occurs?  That will
> > make it easier to make sure we don't re-introduce the deadlock
> > if this design is ever changed in the future.  And I will probably
> > try to change this design, so this is really a self-serving
> > request :-)
> > 
> > I suspect the deadlock is something like this:
> > 
> >   <user removes battery, platform generates system-level notify>
> >     acpi_bus_notify
> >       blocking_notifier_call_chain
> >         acpi_dock_notifier_call
> >           acpi_os_hotplug_execute(acpi_dock_deferred_cb, ...)
> >             __acpi_os_execute(..., acpi_dock_deferred_cb, ...)
> >               schedule_work(<acpi_dock_deferred_cb>)
> >                 queue_work(keventd_wq, <acpi_dock_deferred_cb>)
> >                   <acpi_dock_deferred_cb queued for execution in keventd_wq>
> > 
> >   worker_thread(keventd_wq)
> >     acpi_os_execute_hp_deferred
> >       acpi_dock_deferred_cb
> >         dock_notify
> >           hotplug_dock_devices
> >             dock_remove_acpi_device
> >               acpi_bus_trim
> >                 acpi_bus_remove
> >                   device_release_driver
> >                     acpi_device_remove
> >                       acpi_battery_remove
> >                         sysfs_remove_battery
> >                           power_supply_unregister
> >                             flush_scheduled_work
> >                               flush_workqueue(keventd_wq)
> > 
> > Now we're waiting for keventd_wq to be flushed, but it won't be
> > considered flushed until acpi_os_execute_hp_deferred() completes.
> > 
> exactly.
> 
> > This sort of analysis is obviously way too long and too specific
> > for a source code comment, but it would be nice to have it in the
> > bugzilla, at least.
> > 
> > And maybe the changelog could mention that flush_scheduled_work()
> > applies to keventd_wq, just to close the loop there.
> > 
> > The source code comment:
> > 
> > > +/* 
> > > + * run the hotplug code in a seperate workqueue
> > > + * to avoid the deadlock issue
> > > + */
> > 
> > should be more specific about what "the deadlock issue" is.
> > Maybe something like:
> > 
> >   /*
> >    * We can't run hotplug code in keventd_wq because the hotplug
> >    * code may call driver .remove() functions, which often use
> >    * flush_scheduled_work() to wait for keventd_wq to be flushed.
> >    */
> > 
> > And it might make more sense to put the comment where the queue
> > is used, i.e., in __acpi_os_execute(), rather than at the definition.
> > 
> good point.
> Refreshed patch attached.

Thanks!  Your changelog makes it a lot more clear.  I added the
full analysis from above to the bugzilla as well.

Reviewed-by: Bjorn Helgaas <bjorn.helgaas@hp.com>

> we used to run the hotplug code in keventd_wq.
> But when hot removing the ACPI battery device,
> power_supply_unregister invokes flush_scheduled_work.
> This causes a deadlock. i.e
> 1. When dock is unplugged, all the hotplug code is run on kevent_wq.
> 2. the hotplug code removes all the child devices of dock device.
> 3. removing the child device may invoke flush_scheduled_work
> 4. flush_scheduled_work waits until all the work on kevent_wq to be
>    finished, while this will never be true because the hotplug code
>    is running on keventd_wq...
> 
> Introduce a new workqueue for hotplug in this patch.
> http://bugzilla.kernel.org/show_bug.cgi?id=13533
> 
> Tested-by: Paul Martin <pm@debian.org>
> Tested-by: Vojtech Gondzala <vojtech.gondzala@gmail.com>
> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
> ---
>  drivers/acpi/osl.c |   25 ++++++++++++++++---------
>  1 file changed, 16 insertions(+), 9 deletions(-)
> 
> Index: linux-2.6/drivers/acpi/osl.c
> ===================================================================
> --- linux-2.6.orig/drivers/acpi/osl.c
> +++ linux-2.6/drivers/acpi/osl.c
> @@ -79,6 +79,7 @@ static acpi_osd_handler acpi_irq_handler
>  static void *acpi_irq_context;
>  static struct workqueue_struct *kacpid_wq;
>  static struct workqueue_struct *kacpi_notify_wq;
> +static struct workqueue_struct *kacpi_hotplug_wq;
>  
>  struct acpi_res_list {
>  	resource_size_t start;
> @@ -192,8 +193,10 @@ acpi_status acpi_os_initialize1(void)
>  {
>  	kacpid_wq = create_singlethread_workqueue("kacpid");
>  	kacpi_notify_wq = create_singlethread_workqueue("kacpi_notify");
> +	kacpi_hotplug_wq = create_singlethread_workqueue("kacpi_hotplug");
>  	BUG_ON(!kacpid_wq);
>  	BUG_ON(!kacpi_notify_wq);
> +	BUG_ON(!kacpi_hotplug_wq);
>  	return AE_OK;
>  }
>  
> @@ -206,6 +209,7 @@ acpi_status acpi_os_terminate(void)
>  
>  	destroy_workqueue(kacpid_wq);
>  	destroy_workqueue(kacpi_notify_wq);
> +	destroy_workqueue(kacpi_hotplug_wq);
>  
>  	return AE_OK;
>  }
> @@ -716,6 +720,7 @@ static acpi_status __acpi_os_execute(acp
>  	acpi_status status = AE_OK;
>  	struct acpi_os_dpc *dpc;
>  	struct workqueue_struct *queue;
> +	work_func_t func;
>  	int ret;
>  	ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
>  			  "Scheduling function [%p(%p)] for deferred execution.\n",
> @@ -740,15 +745,17 @@ static acpi_status __acpi_os_execute(acp
>  	dpc->function = function;
>  	dpc->context = context;
>  
> -	if (!hp) {
> -		INIT_WORK(&dpc->work, acpi_os_execute_deferred);
> -		queue = (type == OSL_NOTIFY_HANDLER) ?
> -			kacpi_notify_wq : kacpid_wq;
> -		ret = queue_work(queue, &dpc->work);
> -	} else {
> -		INIT_WORK(&dpc->work, acpi_os_execute_hp_deferred);
> -		ret = schedule_work(&dpc->work);
> -	}
> +	/*
> +	 * We can't run hotplug code in keventd_wq/kacpid_wq/kacpid_notify_wq
> +	 * because the hotplug code may call driver .remove() functions,
> +	 * which invoke flush_scheduled_work/acpi_os_wait_events_complete
> +	 * to flush these workqueues.
> +	 */
> +	queue = hp ? kacpi_hotplug_wq :
> +		(type == OSL_NOTIFY_HANDLER ? kacpi_notify_wq : kacpid_wq);
> +	func = hp ? acpi_os_execute_hp_deferred : acpi_os_execute_deferred;
> +	INIT_WORK(&dpc->work, func);
> +	ret = queue_work(queue, &dpc->work);
>  
>  	if (!ret) {
>  		printk(KERN_ERR PREFIX
> 
> 
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Len Brown June 24, 2009, 3:24 a.m. UTC | #2
> Reviewed-by: Bjorn Helgaas <bjorn.helgaas@hp.com>

applied

thanks,
Len Brown, Intel Open Source Technology Center

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

Index: linux-2.6/drivers/acpi/osl.c
===================================================================
--- linux-2.6.orig/drivers/acpi/osl.c
+++ linux-2.6/drivers/acpi/osl.c
@@ -79,6 +79,7 @@  static acpi_osd_handler acpi_irq_handler
 static void *acpi_irq_context;
 static struct workqueue_struct *kacpid_wq;
 static struct workqueue_struct *kacpi_notify_wq;
+static struct workqueue_struct *kacpi_hotplug_wq;
 
 struct acpi_res_list {
 	resource_size_t start;
@@ -192,8 +193,10 @@  acpi_status acpi_os_initialize1(void)
 {
 	kacpid_wq = create_singlethread_workqueue("kacpid");
 	kacpi_notify_wq = create_singlethread_workqueue("kacpi_notify");
+	kacpi_hotplug_wq = create_singlethread_workqueue("kacpi_hotplug");
 	BUG_ON(!kacpid_wq);
 	BUG_ON(!kacpi_notify_wq);
+	BUG_ON(!kacpi_hotplug_wq);
 	return AE_OK;
 }
 
@@ -206,6 +209,7 @@  acpi_status acpi_os_terminate(void)
 
 	destroy_workqueue(kacpid_wq);
 	destroy_workqueue(kacpi_notify_wq);
+	destroy_workqueue(kacpi_hotplug_wq);
 
 	return AE_OK;
 }
@@ -716,6 +720,7 @@  static acpi_status __acpi_os_execute(acp
 	acpi_status status = AE_OK;
 	struct acpi_os_dpc *dpc;
 	struct workqueue_struct *queue;
+	work_func_t func;
 	int ret;
 	ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 			  "Scheduling function [%p(%p)] for deferred execution.\n",
@@ -740,15 +745,17 @@  static acpi_status __acpi_os_execute(acp
 	dpc->function = function;
 	dpc->context = context;
 
-	if (!hp) {
-		INIT_WORK(&dpc->work, acpi_os_execute_deferred);
-		queue = (type == OSL_NOTIFY_HANDLER) ?
-			kacpi_notify_wq : kacpid_wq;
-		ret = queue_work(queue, &dpc->work);
-	} else {
-		INIT_WORK(&dpc->work, acpi_os_execute_hp_deferred);
-		ret = schedule_work(&dpc->work);
-	}
+	/*
+	 * We can't run hotplug code in keventd_wq/kacpid_wq/kacpid_notify_wq
+	 * because the hotplug code may call driver .remove() functions,
+	 * which invoke flush_scheduled_work/acpi_os_wait_events_complete
+	 * to flush these workqueues.
+	 */
+	queue = hp ? kacpi_hotplug_wq :
+		(type == OSL_NOTIFY_HANDLER ? kacpi_notify_wq : kacpid_wq);
+	func = hp ? acpi_os_execute_hp_deferred : acpi_os_execute_deferred;
+	INIT_WORK(&dpc->work, func);
+	ret = queue_work(queue, &dpc->work);
 
 	if (!ret) {
 		printk(KERN_ERR PREFIX