@@ -29,8 +29,11 @@
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/gpio-rcar.h>
#include <linux/platform_data/rcar-du.h>
+#include <linux/platform_data/usb-rcar-gen2-phy.h>
#include <linux/platform_device.h>
#include <linux/sh_eth.h>
+#include <linux/usb/phy.h>
+#include <linux/usb/renesas_usbhs.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/r8a7791.h>
@@ -163,6 +166,131 @@ static const struct platform_device_info sata0_info __initconst = {
.dma_mask = DMA_BIT_MASK(32),
};
+/* USBHS */
+#if IS_ENABLED(CONFIG_USB_RENESAS_USBHS_UDC)
+static const struct resource usbhs_resources[] __initconst = {
+ DEFINE_RES_MEM(0xe6590000, 0x100),
+ DEFINE_RES_IRQ(gic_spi(107)),
+};
+
+struct usbhs_private {
+ struct renesas_usbhs_platform_info info;
+ struct usb_phy *phy;
+};
+
+#define usbhs_get_priv(pdev) \
+ container_of(renesas_usbhs_get_info(pdev), struct usbhs_private, info)
+
+static int usbhs_power_ctrl(struct platform_device *pdev,
+ void __iomem *base, int enable)
+{
+ struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+ if (!priv->phy)
+ return -ENODEV;
+
+ if (enable) {
+ int retval = usb_phy_init(priv->phy);
+
+ if (!retval)
+ retval = usb_phy_set_suspend(priv->phy, 0);
+ return retval;
+ }
+
+ usb_phy_set_suspend(priv->phy, 1);
+ usb_phy_shutdown(priv->phy);
+ return 0;
+}
+
+static int usbhs_hardware_init(struct platform_device *pdev)
+{
+ struct usbhs_private *priv = usbhs_get_priv(pdev);
+ struct usb_phy *phy;
+
+ phy = usb_get_phy_dev(&pdev->dev, 0);
+ if (IS_ERR(phy))
+ return PTR_ERR(phy);
+
+ priv->phy = phy;
+ return 0;
+}
+
+static int usbhs_hardware_exit(struct platform_device *pdev)
+{
+ struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+ if (!priv->phy)
+ return 0;
+
+ usb_put_phy(priv->phy);
+ priv->phy = NULL;
+ return 0;
+}
+
+static int usbhs_get_id(struct platform_device *pdev)
+{
+ return USBHS_GADGET;
+}
+
+static u32 koelsch_usbhs_pipe_type[] = {
+ USB_ENDPOINT_XFER_CONTROL,
+ USB_ENDPOINT_XFER_ISOC,
+ USB_ENDPOINT_XFER_ISOC,
+ USB_ENDPOINT_XFER_BULK,
+ USB_ENDPOINT_XFER_BULK,
+ USB_ENDPOINT_XFER_BULK,
+ USB_ENDPOINT_XFER_INT,
+ USB_ENDPOINT_XFER_INT,
+ USB_ENDPOINT_XFER_INT,
+ USB_ENDPOINT_XFER_BULK,
+ USB_ENDPOINT_XFER_BULK,
+ USB_ENDPOINT_XFER_BULK,
+ USB_ENDPOINT_XFER_BULK,
+ USB_ENDPOINT_XFER_BULK,
+ USB_ENDPOINT_XFER_BULK,
+ USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usbhs_private usbhs_priv __initdata = {
+ .info = {
+ .platform_callback = {
+ .power_ctrl = usbhs_power_ctrl,
+ .hardware_init = usbhs_hardware_init,
+ .hardware_exit = usbhs_hardware_exit,
+ .get_id = usbhs_get_id,
+ },
+ .driver_param = {
+ .buswait_bwait = 4,
+ .pipe_type = koelsch_usbhs_pipe_type,
+ .pipe_size = ARRAY_SIZE(koelsch_usbhs_pipe_type),
+ },
+ }
+};
+
+static void __init koelsch_register_usbhs(void)
+{
+ usb_bind_phy("renesas_usbhs", 0, "usb_phy_rcar_gen2");
+ platform_device_register_resndata(&platform_bus,
+ "renesas_usbhs", -1,
+ usbhs_resources,
+ ARRAY_SIZE(usbhs_resources),
+ &usbhs_priv.info,
+ sizeof(usbhs_priv.info));
+}
+#else /* CONFIG_USB_RENESAS_USBHS_UDC */
+static inline void koelsch_register_usbhs(void) { }
+#endif /* CONFIG_USB_RENESAS_USBHS_UDC */
+
+/* USBHS PHY */
+static const struct rcar_gen2_phy_platform_data usbhs_phy_pdata __initconst = {
+ .chan0_pci = 0, /* Channel 0 is USBHS */
+ .chan2_pci = 1, /* Channel 2 is PCI USB */
+};
+
+static const struct resource usbhs_phy_resources[] __initconst = {
+ DEFINE_RES_MEM(0xe6590100, 0x100),
+};
+
static const struct pinctrl_map koelsch_pinctrl_map[] = {
/* DU */
PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791",
@@ -186,6 +314,9 @@ static const struct pinctrl_map koelsch_pinctrl_map[] = {
/* SCIF1 (CN20: DEBUG SERIAL1) */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7791",
"scif1_data_d", "scif1"),
+ /* USB0 */
+ PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-r8a7791",
+ "usb0", "usb0"),
};
static void __init koelsch_add_standard_devices(void)
@@ -209,6 +340,13 @@ static void __init koelsch_add_standard_devices(void)
koelsch_add_du_device();
platform_device_register_full(&sata0_info);
+
+ platform_device_register_resndata(&platform_bus, "usb_phy_rcar_gen2",
+ -1, usbhs_phy_resources,
+ ARRAY_SIZE(usbhs_phy_resources),
+ &usbhs_phy_pdata,
+ sizeof(usbhs_phy_pdata));
+ koelsch_register_usbhs();
}
/*
This adds USBHS PHY and registers USBHS device if the driver is enabled. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> --- arch/arm/mach-shmobile/board-koelsch.c | 138 +++++++++++++++++++++++++++++++++ 1 file changed, 138 insertions(+) Changes in V3: * none. Changes in V2: * capitalized ARM in the subject; * rebased on top the latest devel tag; * added pipe_type array to the usbhs platform info since it differs from the default.