| Message ID | 1391605507-30981-2-git-send-email-maxime.ripard@free-electrons.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
Quoting Maxime Ripard (2014-02-05 05:05:03) > The A31 has a slightly different PLL6 clock. Add support for this new clock in > our driver. > > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Looks good to me. Regards, Mike > --- > Documentation/devicetree/bindings/clock/sunxi.txt | 1 + > drivers/clk/sunxi/clk-sunxi.c | 45 +++++++++++++++++++++++ > 2 files changed, 46 insertions(+) > > diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt > index c2cb762..954845c 100644 > --- a/Documentation/devicetree/bindings/clock/sunxi.txt > +++ b/Documentation/devicetree/bindings/clock/sunxi.txt > @@ -11,6 +11,7 @@ Required properties: > "allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31 > "allwinner,sun4i-pll5-clk" - for the PLL5 clock > "allwinner,sun4i-pll6-clk" - for the PLL6 clock > + "allwinner,sun6i-a31-pll6-clk" - for the PLL6 clock on A31 > "allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock > "allwinner,sun4i-axi-clk" - for the AXI clock > "allwinner,sun4i-axi-gates-clk" - for the AXI gates > diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c > index abb6c5a..0c05c2d 100644 > --- a/drivers/clk/sunxi/clk-sunxi.c > +++ b/drivers/clk/sunxi/clk-sunxi.c > @@ -249,7 +249,38 @@ static void sun4i_get_pll5_factors(u32 *freq, u32 parent_rate, > *n = DIV_ROUND_UP(div, (*k+1)); > } > > +/** > + * sun6i_a31_get_pll6_factors() - calculates n, k factors for A31 PLL6 > + * PLL6 rate is calculated as follows > + * rate = parent_rate * n * (k + 1) / 2 > + * parent_rate is always 24Mhz > + */ > + > +static void sun6i_a31_get_pll6_factors(u32 *freq, u32 parent_rate, > + u8 *n, u8 *k, u8 *m, u8 *p) > +{ > + u8 div; > + > + /* > + * We always have 24MHz / 2, so we can just say that our > + * parent clock is 12MHz. > + */ > + parent_rate = parent_rate / 2; > + > + /* Normalize value to a parent_rate multiple (24M / 2) */ > + div = *freq / parent_rate; > + *freq = parent_rate * div; > + > + /* we were called to round the frequency, we can now return */ > + if (n == NULL) > + return; > + > + *k = div / 32; > + if (*k > 3) > + *k = 3; > > + *n = DIV_ROUND_UP(div, (*k+1)); > +} > > /** > * sun4i_get_apb1_factors() - calculates m, p factors for APB1 > @@ -416,6 +447,13 @@ static struct clk_factors_config sun4i_pll5_config = { > .kwidth = 2, > }; > > +static struct clk_factors_config sun6i_a31_pll6_config = { > + .nshift = 8, > + .nwidth = 5, > + .kshift = 4, > + .kwidth = 2, > +}; > + > static struct clk_factors_config sun4i_apb1_config = { > .mshift = 0, > .mwidth = 5, > @@ -457,6 +495,12 @@ static const struct factors_data sun4i_pll5_data __initconst = { > .getter = sun4i_get_pll5_factors, > }; > > +static const struct factors_data sun6i_a31_pll6_data __initconst = { > + .enable = 31, > + .table = &sun6i_a31_pll6_config, > + .getter = sun6i_a31_get_pll6_factors, > +}; > + > static const struct factors_data sun4i_apb1_data __initconst = { > .table = &sun4i_apb1_config, > .getter = sun4i_get_apb1_factors, > @@ -972,6 +1016,7 @@ free_clkdata: > static const struct of_device_id clk_factors_match[] __initconst = { > {.compatible = "allwinner,sun4i-pll1-clk", .data = &sun4i_pll1_data,}, > {.compatible = "allwinner,sun6i-a31-pll1-clk", .data = &sun6i_a31_pll1_data,}, > + {.compatible = "allwinner,sun6i-a31-pll6-clk", .data = &sun6i_a31_pll6_data,}, > {.compatible = "allwinner,sun4i-apb1-clk", .data = &sun4i_apb1_data,}, > {.compatible = "allwinner,sun4i-mod0-clk", .data = &sun4i_mod0_data,}, > {.compatible = "allwinner,sun7i-a20-out-clk", .data = &sun7i_a20_out_data,}, > -- > 1.8.4.2 > -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
El 05/02/14 10:05, Maxime Ripard escribió: > The A31 has a slightly different PLL6 clock. Add support for this new clock in > our driver. > > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Taken via sunxi-clk-for-mike. Thanks! Emilio -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index c2cb762..954845c 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -11,6 +11,7 @@ Required properties: "allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31 "allwinner,sun4i-pll5-clk" - for the PLL5 clock "allwinner,sun4i-pll6-clk" - for the PLL6 clock + "allwinner,sun6i-a31-pll6-clk" - for the PLL6 clock on A31 "allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock "allwinner,sun4i-axi-clk" - for the AXI clock "allwinner,sun4i-axi-gates-clk" - for the AXI gates diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index abb6c5a..0c05c2d 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -249,7 +249,38 @@ static void sun4i_get_pll5_factors(u32 *freq, u32 parent_rate, *n = DIV_ROUND_UP(div, (*k+1)); } +/** + * sun6i_a31_get_pll6_factors() - calculates n, k factors for A31 PLL6 + * PLL6 rate is calculated as follows + * rate = parent_rate * n * (k + 1) / 2 + * parent_rate is always 24Mhz + */ + +static void sun6i_a31_get_pll6_factors(u32 *freq, u32 parent_rate, + u8 *n, u8 *k, u8 *m, u8 *p) +{ + u8 div; + + /* + * We always have 24MHz / 2, so we can just say that our + * parent clock is 12MHz. + */ + parent_rate = parent_rate / 2; + + /* Normalize value to a parent_rate multiple (24M / 2) */ + div = *freq / parent_rate; + *freq = parent_rate * div; + + /* we were called to round the frequency, we can now return */ + if (n == NULL) + return; + + *k = div / 32; + if (*k > 3) + *k = 3; + *n = DIV_ROUND_UP(div, (*k+1)); +} /** * sun4i_get_apb1_factors() - calculates m, p factors for APB1 @@ -416,6 +447,13 @@ static struct clk_factors_config sun4i_pll5_config = { .kwidth = 2, }; +static struct clk_factors_config sun6i_a31_pll6_config = { + .nshift = 8, + .nwidth = 5, + .kshift = 4, + .kwidth = 2, +}; + static struct clk_factors_config sun4i_apb1_config = { .mshift = 0, .mwidth = 5, @@ -457,6 +495,12 @@ static const struct factors_data sun4i_pll5_data __initconst = { .getter = sun4i_get_pll5_factors, }; +static const struct factors_data sun6i_a31_pll6_data __initconst = { + .enable = 31, + .table = &sun6i_a31_pll6_config, + .getter = sun6i_a31_get_pll6_factors, +}; + static const struct factors_data sun4i_apb1_data __initconst = { .table = &sun4i_apb1_config, .getter = sun4i_get_apb1_factors, @@ -972,6 +1016,7 @@ free_clkdata: static const struct of_device_id clk_factors_match[] __initconst = { {.compatible = "allwinner,sun4i-pll1-clk", .data = &sun4i_pll1_data,}, {.compatible = "allwinner,sun6i-a31-pll1-clk", .data = &sun6i_a31_pll1_data,}, + {.compatible = "allwinner,sun6i-a31-pll6-clk", .data = &sun6i_a31_pll6_data,}, {.compatible = "allwinner,sun4i-apb1-clk", .data = &sun4i_apb1_data,}, {.compatible = "allwinner,sun4i-mod0-clk", .data = &sun4i_mod0_data,}, {.compatible = "allwinner,sun7i-a20-out-clk", .data = &sun7i_a20_out_data,},
The A31 has a slightly different PLL6 clock. Add support for this new clock in our driver. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> --- Documentation/devicetree/bindings/clock/sunxi.txt | 1 + drivers/clk/sunxi/clk-sunxi.c | 45 +++++++++++++++++++++++ 2 files changed, 46 insertions(+)