Message ID | 1391779377-10176-1-git-send-email-acourbot@nvidia.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Fri, Feb 7, 2014 at 11:22 PM, Alexandre Courbot <acourbot@nvidia.com> wrote: > Address of the ENG_RUNLIST register should be 0x002284 + (engine * 8), > not 0x002284 + (engine * 4). > > Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> > --- > Stumbled upon this one and I'm quite certain the offset was not correct. > This is inconsequential for GK20A which only features one runlist, but > other GPUs might run into troubles because of this. Not tested, just > reported for your consideration. I noticed this also while doing some other work I haven't committed yet. I'll push this patch ahead of that other work though. Thanks, Ben. > > FWIW, the Android GK20A driver uses the same offset calculation. > > drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c b/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c > index 99c9dee..dbc3ff6 100644 > --- a/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c > +++ b/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c > @@ -112,7 +112,7 @@ nve0_fifo_runlist_update(struct nve0_fifo_priv *priv, u32 engine) > > nv_wr32(priv, 0x002270, cur->addr >> 12); > nv_wr32(priv, 0x002274, (engine << 20) | (p >> 3)); > - if (!nv_wait(priv, 0x002284 + (engine * 4), 0x00100000, 0x00000000)) > + if (!nv_wait(priv, 0x002284 + (engine * 8), 0x00100000, 0x00000000)) > nv_error(priv, "runlist %d update timeout\n", engine); > mutex_unlock(&nv_subdev(priv)->mutex); > } > -- > 1.8.5.3 > > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/dri-devel
diff --git a/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c b/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c index 99c9dee..dbc3ff6 100644 --- a/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c +++ b/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c @@ -112,7 +112,7 @@ nve0_fifo_runlist_update(struct nve0_fifo_priv *priv, u32 engine) nv_wr32(priv, 0x002270, cur->addr >> 12); nv_wr32(priv, 0x002274, (engine << 20) | (p >> 3)); - if (!nv_wait(priv, 0x002284 + (engine * 4), 0x00100000, 0x00000000)) + if (!nv_wait(priv, 0x002284 + (engine * 8), 0x00100000, 0x00000000)) nv_error(priv, "runlist %d update timeout\n", engine); mutex_unlock(&nv_subdev(priv)->mutex); }
Address of the ENG_RUNLIST register should be 0x002284 + (engine * 8), not 0x002284 + (engine * 4). Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> --- Stumbled upon this one and I'm quite certain the offset was not correct. This is inconsequential for GK20A which only features one runlist, but other GPUs might run into troubles because of this. Not tested, just reported for your consideration. FWIW, the Android GK20A driver uses the same offset calculation. drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)