diff mbox

[linux-dvb] Support for Compro VideoMate S350

Message ID 200906231804.28893.liplianin@me.by (mailing list archive)
State RFC
Headers show

Commit Message

Igor M. Liplianin June 23, 2009, 3:04 p.m. UTC 
On 23 June 2009 15:18:38 O&M Ugarcina wrote:
> Thanks for that Igor,
>
> I have just pulled the latest hg and tried to apply patches . Patches
> 12094 and 12095 went in with no problem . However patch 12096 failed
> with this output :
>
> [root@localhost v4l-dvb]# patch -p1 < 12096.patch
> patching file linux/drivers/media/common/ir-keymaps.c
> Hunk #1 FAILED at 2800.
> 1 out of 1 hunk FAILED -- saving rejects to file
> linux/drivers/media/common/ir-keymaps.c.rej
> patching file linux/drivers/media/video/saa7134/Kconfig
> patching file linux/drivers/media/video/saa7134/saa7134-cards.c
> patching file linux/drivers/media/video/saa7134/saa7134-dvb.c
> patching file linux/drivers/media/video/saa7134/saa7134-input.c
> patching file linux/drivers/media/video/saa7134/saa7134.h
> patching file linux/include/media/ir-common.h
> Hunk #1 FAILED at 162.
> 1 out of 1 hunk FAILED -- saving rejects to file
> linux/include/media/ir-common.h.rej
> [root@localhost v4l-dvb]#
>

I recreate last patch just now.

Igor

Comments

O&M Ugarcina June 24, 2009, 10:10 a.m. UTC | #1 
Thanks Igor,

I have tried the second version of the 12096 patch and it applied 
perfectly . Also I ran a make on the dvb drivers , and they all compiled 
without error . So everything is good now . Next step is to install the 
drivers and the Compro S350 card into the PC . One question please , I 
only need these new drivers to get the S350 working , so which .ko's do 
I need to install ? I am quite happy to have the other stuff such as 
webcams ...etc. from the kernel .


Best Regards

Milorad
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
O&M Ugarcina June 27, 2009, 9:09 a.m. UTC | #2 
Hello Igor ,

I want to thank you for making those patches available . I have been 
able to patch the latest HG pull and to compile and install the drivers 
. I decided to install the whole lot as it was a bit hard to workout 
just the ko's responsible for the S350 . After installing the card I 
have this from dmesg :

saa7130/34: v4l2 driver version 0.2.15 loaded
saa7134 0000:04:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
saa7130[0]: found at 0000:04:01.0, rev: 1, irq: 22, latency: 64, mmio: 
0xfeaffc00
saa7130[0]: subsystem: 185b:c900, board: Compro VideoMate S350/S300 
[card=169,autodetected]
saa7130[0]: board init: gpio is 843f00
input: saa7134 IR (Compro VideoMate S3 as 
/devices/pci0000:00/0000:00:1e.0/0000:04:01.0/input/input5
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
parport_pc 00:0b: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
saa7130[0]: i2c eeprom 00: 5b 18 00 c9 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7130[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom 20: 01 40 01 02 02 01 03 01 08 ff 00 87 ff ff ff ff
saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom 40: ff d6 00 c0 86 1c 02 01 02 ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff cb
saa7130[0]: i2c eeprom 60: 30 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom 70: 00 00 00 10 03 9c ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: registered device video0 [v4l2]
saa7130[0]: registered device vbi0
i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region 
SMRG [0x400-0x40f]
ACPI: Device needs an ACPI driver
ppdev: user-space parallel port driver
dvb_init() allocating 1 frontend
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
cx88/0: cx2388x v4l2 driver version 0.0.7 loaded
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.7 loaded
DVB: registering new adapter (saa7130[0])
DVB: registering adapter 0 frontend 0 (Zarlink ZL10313 DVB-S).


I was able to tune into my favourite satellite with mythtv with no 
problems . I also was able to tune to another satellite using the mythtv 
configuration for 4 way diseqc . So 4 way diseqc works fine for me . 
Picture is satble and very good , sound also is ok . I will just run it 
now to see how the system stability is over a longer period of time .

One small issue I have noticed : and that is in mythtv the signal 
strength indicator shows very low with S350 now . Before I was getting 
with TT1500S around 79 to 89% while now with S350 I see about 18% for 
the same channel .

Best Regards

Milorad


--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Igor M. Liplianin June 27, 2009, 11:48 a.m. UTC | #3 
On 27 June 2009 12:09:20 O&M Ugarcina wrote:
> Hello Igor ,
>
> I want to thank you for making those patches available . I have been
> able to patch the latest HG pull and to compile and install the drivers
> . I decided to install the whole lot as it was a bit hard to workout
> just the ko's responsible for the S350 . After installing the card I
> have this from dmesg :
>
> saa7130/34: v4l2 driver version 0.2.15 loaded
> saa7134 0000:04:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> saa7130[0]: found at 0000:04:01.0, rev: 1, irq: 22, latency: 64, mmio:
> 0xfeaffc00
> saa7130[0]: subsystem: 185b:c900, board: Compro VideoMate S350/S300
> [card=169,autodetected]
> saa7130[0]: board init: gpio is 843f00
> input: saa7134 IR (Compro VideoMate S3 as
> /devices/pci0000:00/0000:00:1e.0/0000:04:01.0/input/input5
> iTCO_vendor_support: vendor-support=0
> iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
> iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860)
> iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> parport_pc 00:0b: reported by Plug and Play ACPI
> parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
> saa7130[0]: i2c eeprom 00: 5b 18 00 c9 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
> saa7130[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
> saa7130[0]: i2c eeprom 20: 01 40 01 02 02 01 03 01 08 ff 00 87 ff ff ff ff
> saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7130[0]: i2c eeprom 40: ff d6 00 c0 86 1c 02 01 02 ff ff ff ff ff ff ff
> saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff cb
> saa7130[0]: i2c eeprom 60: 30 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7130[0]: i2c eeprom 70: 00 00 00 10 03 9c ff ff ff ff ff ff ff ff ff ff
> saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7130[0]: registered device video0 [v4l2]
> saa7130[0]: registered device vbi0
> i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
> i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region
> SMRG [0x400-0x40f]
> ACPI: Device needs an ACPI driver
> ppdev: user-space parallel port driver
> dvb_init() allocating 1 frontend
> HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> HDA Intel 0000:00:1b.0: setting latency timer to 64
> cx88/0: cx2388x v4l2 driver version 0.0.7 loaded
> cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.7 loaded
> DVB: registering new adapter (saa7130[0])
> DVB: registering adapter 0 frontend 0 (Zarlink ZL10313 DVB-S).
>
>
> I was able to tune into my favourite satellite with mythtv with no
> problems . I also was able to tune to another satellite using the mythtv
> configuration for 4 way diseqc . So 4 way diseqc works fine for me .
> Picture is satble and very good , sound also is ok . I will just run it
> now to see how the system stability is over a longer period of time .
>
> One small issue I have noticed : and that is in mythtv the signal
> strength indicator shows very low with S350 now . Before I was getting
> with TT1500S around 79 to 89% while now with S350 I see about 18% for
> the same channel .
It is not about more or less sensitivity, it is about how to represent :(

I have positive reports about Compro S350 in russian also.
http://forum.free-x.de/wbb/index.php?page=Thread&threadID=474
I will try to push :)

>
> Best Regards
>
> Milorad

Best Regards
 
Igor
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Mauro Carvalho Chehab Aug. 13, 2009, 6:17 p.m. UTC | #4 
Em Tue, 23 Jun 2009 18:04:28 +0300
"Igor M. Liplianin" <liplianin@me.by> escreveu:

> On 23 June 2009 15:18:38 O&M Ugarcina wrote:
> > Thanks for that Igor,
> >
> > I have just pulled the latest hg and tried to apply patches . Patches
> > 12094 and 12095 went in with no problem . However patch 12096 failed
> > with this output :
> >
> > [root@localhost v4l-dvb]# patch -p1 < 12096.patch
> > patching file linux/drivers/media/common/ir-keymaps.c
> > Hunk #1 FAILED at 2800.
> > 1 out of 1 hunk FAILED -- saving rejects to file
> > linux/drivers/media/common/ir-keymaps.c.rej
> > patching file linux/drivers/media/video/saa7134/Kconfig
> > patching file linux/drivers/media/video/saa7134/saa7134-cards.c
> > patching file linux/drivers/media/video/saa7134/saa7134-dvb.c
> > patching file linux/drivers/media/video/saa7134/saa7134-input.c
> > patching file linux/drivers/media/video/saa7134/saa7134.h
> > patching file linux/include/media/ir-common.h
> > Hunk #1 FAILED at 162.
> > 1 out of 1 hunk FAILED -- saving rejects to file
> > linux/include/media/ir-common.h.rej
> > [root@localhost v4l-dvb]#
> >
> 
> I recreate last patch just now.

Igor,

As this patch seems to depend on a new demod not yet merged, I'll assume that
this patch is an RFC. Please send me a pull request when you have it ready for
upstream.




Cheers,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

# HG changeset patch
# User Igor M. Liplianin <liplianin@me.by>
# Date 1245768974 -10800
# Node ID 170087b85e38857ab2ce629777ce4adb548c42b6
# Parent  ae94525150167d61862a860b92a03dcb0f1c584b
Add support for Compro VideoMate S350 DVB-S PCI card.

From: Igor M. Liplianin <liplianin@me.by>

Add Compro VideoMate S350 DVB-S driver.
The card uses zl10313, zl10039, saa7130 integrated circuits.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>

diff -r ae9452515016 -r 170087b85e38 linux/drivers/media/common/ir-keymaps.c
--- a/linux/drivers/media/common/ir-keymaps.c	Sat Jun 20 15:54:18 2009 +0300
+++ b/linux/drivers/media/common/ir-keymaps.c	Tue Jun 23 17:56:14 2009 +0300
@@ -2823,3 +2823,51 @@ 
 	[0x13] = KEY_CAMERA,
 };
 EXPORT_SYMBOL_GPL(ir_codes_evga_indtube);
+
+IR_KEYTAB_TYPE ir_codes_videomate_s350[IR_KEYTAB_SIZE] = {
+	[0x00] = KEY_TV,
+	[0x01] = KEY_DVD,
+	[0x04] = KEY_RECORD,
+	[0x05] = KEY_VIDEO, /* TV/Video */
+	[0x07] = KEY_STOP,
+	[0x08] = KEY_PLAYPAUSE,
+	[0x0a] = KEY_REWIND,
+	[0x0f] = KEY_FASTFORWARD,
+	[0x10] = KEY_CHANNELUP,
+	[0x12] = KEY_VOLUMEUP,
+	[0x13] = KEY_CHANNELDOWN,
+	[0x14] = KEY_MUTE,
+	[0x15] = KEY_VOLUMEDOWN,
+	[0x16] = KEY_1,
+	[0x17] = KEY_2,
+	[0x18] = KEY_3,
+	[0x19] = KEY_4,
+	[0x1a] = KEY_5,
+	[0x1b] = KEY_6,
+	[0x1c] = KEY_7,
+	[0x1d] = KEY_8,
+	[0x1e] = KEY_9,
+	[0x1f] = KEY_0,
+	[0x21] = KEY_SLEEP,
+	[0x24] = KEY_ZOOM,
+	[0x25] = KEY_LAST,    /* Recall */
+	[0x26] = KEY_SUBTITLE, /* CC */
+	[0x27] = KEY_LANGUAGE, /* MTS */
+	[0x29] = KEY_CHANNEL, /* SURF */
+	[0x2b] = KEY_A,
+	[0x2c] = KEY_B,
+	[0x2f] = KEY_SHUFFLE, /* Snapshot */
+	[0x23] = KEY_RADIO,
+	[0x02] = KEY_PREVIOUSSONG,
+	[0x06] = KEY_NEXTSONG,
+	[0x03] = KEY_EPG,
+	[0x09] = KEY_SETUP,
+	[0x22] = KEY_BACKSPACE,
+	[0x0c] = KEY_UP,
+	[0x0e] = KEY_DOWN,
+	[0x0b] = KEY_LEFT,
+	[0x0d] = KEY_RIGHT,
+	[0x11] = KEY_ENTER,
+	[0x20] = KEY_TEXT,
+};
+EXPORT_SYMBOL_GPL(ir_codes_videomate_s350);
diff -r ae9452515016 -r 170087b85e38 linux/drivers/media/video/saa7134/Kconfig
--- a/linux/drivers/media/video/saa7134/Kconfig	Sat Jun 20 15:54:18 2009 +0300
+++ b/linux/drivers/media/video/saa7134/Kconfig	Tue Jun 23 17:56:14 2009 +0300
@@ -47,6 +47,7 @@ 
 	select DVB_TDA10048 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMISE
+	select DVB_ZL10039 if !DVB_FE_CUSTOMISE
 	---help---
 	  This adds support for DVB cards based on the
 	  Philips saa7134 chip.
diff -r ae9452515016 -r 170087b85e38 linux/drivers/media/video/saa7134/saa7134-cards.c
--- a/linux/drivers/media/video/saa7134/saa7134-cards.c	Sat Jun 20 15:54:18 2009 +0300
+++ b/linux/drivers/media/video/saa7134/saa7134-cards.c	Tue Jun 23 17:56:14 2009 +0300
@@ -5155,6 +5155,25 @@ 
 			.gpio = 0x00,
 		},
 	},
+	[SAA7134_BOARD_VIDEOMATE_S350] = {
+		/* Jan D. Louw <jd.louw@mweb.co.za */
+		.name		= "Compro VideoMate S350/S300",
+		.audio_clock	= 0x00187de7,
+		.tuner_type	= TUNER_ABSENT,
+		.radio_type	= UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.mpeg		= SAA7134_MPEG_DVB,
+		.inputs = { {
+			.name	= name_comp1,
+			.vmux	= 0,
+			.amux	= LINE1,
+		}, {
+			.name	= name_svideo,
+			.vmux	= 8, /* Not tested */
+			.amux	= LINE1
+		} },
+	},
 };
 
 const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
@@ -6262,7 +6281,12 @@ 
 		.subvendor    = 0x1461, /* Avermedia Technologies Inc */
 		.subdevice    = 0xf31d,
 		.driver_data  = SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS,
-
+	}, {
+		.vendor       = PCI_VENDOR_ID_PHILIPS,
+		.device       = PCI_DEVICE_ID_PHILIPS_SAA7130,
+		.subvendor    = 0x185b,
+		.subdevice    = 0xc900,
+		.driver_data  = SAA7134_BOARD_VIDEOMATE_S350,
 	}, {
 		/* --- boards without eeprom + subsystem ID --- */
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
@@ -6776,6 +6800,11 @@ 
 		saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   0x80040100, 0x80040100);
 		saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x80040100, 0x00040100);
 		break;
+	case SAA7134_BOARD_VIDEOMATE_S350:
+		dev->has_remote = SAA7134_REMOTE_GPIO;
+		saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   0x00008000, 0x00008000);
+		saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00008000, 0x00008000);
+		break;
 	}
 	return 0;
 }
diff -r ae9452515016 -r 170087b85e38 linux/drivers/media/video/saa7134/saa7134-dvb.c
--- a/linux/drivers/media/video/saa7134/saa7134-dvb.c	Sat Jun 20 15:54:18 2009 +0300
+++ b/linux/drivers/media/video/saa7134/saa7134-dvb.c	Tue Jun 23 17:56:14 2009 +0300
@@ -56,6 +56,7 @@ 
 #include "zl10353.h"
 
 #include "zl10036.h"
+#include "zl10039.h"
 #include "mt312.h"
 
 MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
@@ -968,6 +969,10 @@ 
 	.tuner_address = 0x60,
 };
 
+static struct mt312_config zl10313_compro_s350_config = {
+	.demod_address = 0x0e,
+};
+
 static struct lgdt3305_config hcw_lgdt3305_config = {
 	.i2c_addr           = 0x0e,
 	.mpeg_mode          = LGDT3305_MPEG_SERIAL,
@@ -1477,6 +1482,16 @@ 
 			}
 		}
 		break;
+	case SAA7134_BOARD_VIDEOMATE_S350:
+		fe0->dvb.frontend = dvb_attach(mt312_attach,
+				&zl10313_compro_s350_config, &dev->i2c_adap);
+		if (fe0->dvb.frontend)
+			if (dvb_attach(zl10039_attach, fe0->dvb.frontend,
+					0x60, &dev->i2c_adap) == NULL)
+				wprintk("%s: No zl10039 found!\n",
+					__func__);
+
+		break;
 	default:
 		wprintk("Huh? unknown DVB card?\n");
 		break;
diff -r ae9452515016 -r 170087b85e38 linux/drivers/media/video/saa7134/saa7134-input.c
--- a/linux/drivers/media/video/saa7134/saa7134-input.c	Sat Jun 20 15:54:18 2009 +0300
+++ b/linux/drivers/media/video/saa7134/saa7134-input.c	Tue Jun 23 17:56:14 2009 +0300
@@ -646,6 +646,11 @@ 
 		mask_keycode = 0x7f;
 		polling = 40; /* ms */
 		break;
+	case SAA7134_BOARD_VIDEOMATE_S350:
+		ir_codes     = ir_codes_videomate_s350;
+		mask_keycode = 0x003f00;
+		mask_keydown = 0x040000;
+		break;
 	}
 	if (NULL == ir_codes) {
 		printk("%s: Oops: IR config error [card=%d]\n",
diff -r ae9452515016 -r 170087b85e38 linux/drivers/media/video/saa7134/saa7134.h
--- a/linux/drivers/media/video/saa7134/saa7134.h	Sat Jun 20 15:54:18 2009 +0300
+++ b/linux/drivers/media/video/saa7134/saa7134.h	Tue Jun 23 17:56:14 2009 +0300
@@ -293,6 +293,7 @@ 
 #define SAA7134_BOARD_BEHOLD_607RDS_MK5     166
 #define SAA7134_BOARD_BEHOLD_609RDS_MK3     167
 #define SAA7134_BOARD_BEHOLD_609RDS_MK5     168
+#define SAA7134_BOARD_VIDEOMATE_S350        169
 
 #define SAA7134_MAXBOARDS 32
 #define SAA7134_INPUT_MAX 8
diff -r ae9452515016 -r 170087b85e38 linux/include/media/ir-common.h
--- a/linux/include/media/ir-common.h	Sat Jun 20 15:54:18 2009 +0300
+++ b/linux/include/media/ir-common.h	Tue Jun 23 17:56:14 2009 +0300
@@ -163,6 +163,7 @@ 
 extern IR_KEYTAB_TYPE ir_codes_kaiomy[IR_KEYTAB_SIZE];
 extern IR_KEYTAB_TYPE ir_codes_dm1105_nec[IR_KEYTAB_SIZE];
 extern IR_KEYTAB_TYPE ir_codes_evga_indtube[IR_KEYTAB_SIZE];
+extern IR_KEYTAB_TYPE ir_codes_videomate_s350[IR_KEYTAB_SIZE];
 
 #endif