| Message ID | 1392794148-335-1-git-send-email-Ying.Liu@freescale.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Feb 19, 2014 at 03:15:48PM +0800, Liu Ying wrote: > The D9 LED controlled by gpio on the imx6qdl-sabreauto > CPU board is a debug LED according to the board design. > This patch adds the relevant device tree nodes to the > imx6qdl-sabreauto device tree file to support this LED. > > Signed-off-by: Liu Ying <Ying.Liu@freescale.com> Applied, thanks.
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 33e9bff..009abd6 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -10,11 +10,24 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/gpio/gpio.h> + / { memory { reg = <0x10000000 0x80000000>; }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + user { + label = "debug"; + gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>; + }; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif", "fsl,imx-sabreauto-spdif"; @@ -217,6 +230,12 @@ >; }; + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x80000000 + >; + }; + pinctrl_gpmi_nand: gpminandgrp { fsl,pins = < MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
The D9 LED controlled by gpio on the imx6qdl-sabreauto CPU board is a debug LED according to the board design. This patch adds the relevant device tree nodes to the imx6qdl-sabreauto device tree file to support this LED. Signed-off-by: Liu Ying <Ying.Liu@freescale.com> --- arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)