diff mbox

[v5,00/11] imx-drm dt bindings

Message ID 1394538128.3772.15.camel@paszta.hi.pengutronix.de (mailing list archive)
State New, archived
Headers show

Commit Message

Philipp Zabel March 11, 2014, 11:42 a.m. UTC 
Hi Shawn,

Am Dienstag, den 11.03.2014, 11:46 +0800 schrieb Shawn Guo:
> On Wed, Mar 05, 2014 at 10:20:51AM +0100, Philipp Zabel wrote:
> > Hi,
> > 
> > this latest version of the imx-drm DT binding patches applies
> > on top of staging-next and also depends on the OF graph binding
> > patchset that moves the v4l2_of helpers to drivers/of.
> > Currently, the two patchsets are also available at:
> >     git://git.pengutronix.de/git/pza/linux.git topic/of-graph
> >     git://git.pengutronix.de/git/pza/linux.git topic/imx-drm-dt
> 
> Hi Philipp,
> 
> I just came across a couple problems when testing the series on
> my imx6dl-sabresd board in dual display case - HDMI + LVDS.  I tested it
> using Russell's branch below, which I believe has all the pieces put
> together.
> 
>   git://ftp.arm.linux.org.uk/~rmk/linux-arm.git imx-drm-staging
> 
> - When I enable HDMI and LVDS support in both kernel build and device
>   tree, HDMI seems working fine but LVDS color is corrupted quite badly.
> 
> - When I enable HDMI and LVDS support in kernel build but only LVDS in
>   device tree (keep HDMI disabled in device tree by not changing
>   'status' of HDMI node to 'okay'), LVDS does not even work.  In this
>   case, it seems that the binding of display-subsystem does not succeed.

Can you check if you get the bound messages from
drivers/base/component.c:

imx-drm display-subsystem.11: bound imx-ipuv3-crtc.0 (ops ipu_crtc_ops)
imx-drm display-subsystem.11: bound imx-ipuv3-crtc.1 (ops ipu_crtc_ops)
imx-drm display-subsystem.11: bound ldb.10 (ops imx_ldb_ops)

I have tried this branch with a Phytec phyFLEX i.MX6S on PBAB01
baseboard with EDT 800x480 LVDS panel, and it seems to work.
The check in drivers/staging/imx-drm/imx-drm-core.c:675 should make sure
that unavailable (status="disabled") devices are just skipped.

> Please confirm if they are real problems or I'm missing something here.

If the devices are bound, can you check in debugfs whether the panel
(ldb_di) clock is set correctly?
I wonder if Russell's DI code makes a decision that the panel clock
can't be supported from the IPU internal clock. Then you'd need
something like this to allow setting the video PLL:


regards
Philipp

Comments

Shawn Guo March 11, 2014, 1:27 p.m. UTC | #1 
On Tue, Mar 11, 2014 at 12:42:08PM +0100, Philipp Zabel wrote:
> Hi Shawn,
> 
> Am Dienstag, den 11.03.2014, 11:46 +0800 schrieb Shawn Guo:
> > On Wed, Mar 05, 2014 at 10:20:51AM +0100, Philipp Zabel wrote:
> > > Hi,
> > > 
> > > this latest version of the imx-drm DT binding patches applies
> > > on top of staging-next and also depends on the OF graph binding
> > > patchset that moves the v4l2_of helpers to drivers/of.
> > > Currently, the two patchsets are also available at:
> > >     git://git.pengutronix.de/git/pza/linux.git topic/of-graph
> > >     git://git.pengutronix.de/git/pza/linux.git topic/imx-drm-dt
> > 
> > Hi Philipp,
> > 
> > I just came across a couple problems when testing the series on
> > my imx6dl-sabresd board in dual display case - HDMI + LVDS.  I tested it
> > using Russell's branch below, which I believe has all the pieces put
> > together.
> > 
> >   git://ftp.arm.linux.org.uk/~rmk/linux-arm.git imx-drm-staging
> > 
> > - When I enable HDMI and LVDS support in both kernel build and device
> >   tree, HDMI seems working fine but LVDS color is corrupted quite badly.
> > 
> > - When I enable HDMI and LVDS support in kernel build but only LVDS in
> >   device tree (keep HDMI disabled in device tree by not changing
> >   'status' of HDMI node to 'okay'), LVDS does not even work.  In this
> >   case, it seems that the binding of display-subsystem does not succeed.
> 
> Can you check if you get the bound messages from
> drivers/base/component.c:
> 
> imx-drm display-subsystem.11: bound imx-ipuv3-crtc.0 (ops ipu_crtc_ops)
> imx-drm display-subsystem.11: bound imx-ipuv3-crtc.1 (ops ipu_crtc_ops)
> imx-drm display-subsystem.11: bound ldb.10 (ops imx_ldb_ops)
> 
> I have tried this branch with a Phytec phyFLEX i.MX6S on PBAB01
> baseboard with EDT 800x480 LVDS panel, and it seems to work.
> The check in drivers/staging/imx-drm/imx-drm-core.c:675 should make sure
> that unavailable (status="disabled") devices are just skipped.

Sorry, Philipp.  The setup in my report is incorrect.  The correct setup
to see this issue consists of:

1) build a kernel without HDMI support, i.e. !CONFIG_DRM_IMX_HDMI

2) enable HDMI device in DT, i.e. adding the lines below in board dts.

	&hdmi {
	       status = "okay";
	};

Sorry for the confusion.

Shawn
Lucas Stach March 11, 2014, 1:34 p.m. UTC | #2 
Am Dienstag, den 11.03.2014, 21:27 +0800 schrieb Shawn Guo:
> On Tue, Mar 11, 2014 at 12:42:08PM +0100, Philipp Zabel wrote:
> > Hi Shawn,
> > 
> > Am Dienstag, den 11.03.2014, 11:46 +0800 schrieb Shawn Guo:
> > > On Wed, Mar 05, 2014 at 10:20:51AM +0100, Philipp Zabel wrote:
> > > > Hi,
> > > > 
> > > > this latest version of the imx-drm DT binding patches applies
> > > > on top of staging-next and also depends on the OF graph binding
> > > > patchset that moves the v4l2_of helpers to drivers/of.
> > > > Currently, the two patchsets are also available at:
> > > >     git://git.pengutronix.de/git/pza/linux.git topic/of-graph
> > > >     git://git.pengutronix.de/git/pza/linux.git topic/imx-drm-dt
> > > 
> > > Hi Philipp,
> > > 
> > > I just came across a couple problems when testing the series on
> > > my imx6dl-sabresd board in dual display case - HDMI + LVDS.  I tested it
> > > using Russell's branch below, which I believe has all the pieces put
> > > together.
> > > 
> > >   git://ftp.arm.linux.org.uk/~rmk/linux-arm.git imx-drm-staging
> > > 
> > > - When I enable HDMI and LVDS support in both kernel build and device
> > >   tree, HDMI seems working fine but LVDS color is corrupted quite badly.
> > > 
> > > - When I enable HDMI and LVDS support in kernel build but only LVDS in
> > >   device tree (keep HDMI disabled in device tree by not changing
> > >   'status' of HDMI node to 'okay'), LVDS does not even work.  In this
> > >   case, it seems that the binding of display-subsystem does not succeed.
> > 
> > Can you check if you get the bound messages from
> > drivers/base/component.c:
> > 
> > imx-drm display-subsystem.11: bound imx-ipuv3-crtc.0 (ops ipu_crtc_ops)
> > imx-drm display-subsystem.11: bound imx-ipuv3-crtc.1 (ops ipu_crtc_ops)
> > imx-drm display-subsystem.11: bound ldb.10 (ops imx_ldb_ops)
> > 
> > I have tried this branch with a Phytec phyFLEX i.MX6S on PBAB01
> > baseboard with EDT 800x480 LVDS panel, and it seems to work.
> > The check in drivers/staging/imx-drm/imx-drm-core.c:675 should make sure
> > that unavailable (status="disabled") devices are just skipped.
> 
> Sorry, Philipp.  The setup in my report is incorrect.  The correct setup
> to see this issue consists of:
> 
> 1) build a kernel without HDMI support, i.e. !CONFIG_DRM_IMX_HDMI
> 
> 2) enable HDMI device in DT, i.e. adding the lines below in board dts.
> 
> 	&hdmi {
> 	       status = "okay";
> 	};
> 
> Sorry for the confusion.
> 
This isn't a supported use-case, the componentized device stuff is there
exactly to ensure that the DRM device is only brought up after all
active components have an driver attached to them.

Regards,
Lucas
Shawn Guo March 11, 2014, 2:14 p.m. UTC | #3 
On Tue, Mar 11, 2014 at 02:34:38PM +0100, Lucas Stach wrote:
> > Sorry, Philipp.  The setup in my report is incorrect.  The correct setup
> > to see this issue consists of:
> > 
> > 1) build a kernel without HDMI support, i.e. !CONFIG_DRM_IMX_HDMI
> > 
> > 2) enable HDMI device in DT, i.e. adding the lines below in board dts.
> > 
> > 	&hdmi {
> > 	       status = "okay";
> > 	};
> > 
> > Sorry for the confusion.
> > 
> This isn't a supported use-case, the componentized device stuff is there
> exactly to ensure that the DRM device is only brought up after all
> active components have an driver attached to them.

Ah, yes.  I was in the impression that LVDS should still work in this
setup, but that was the case before Philipp's series.  In Russell's
original imx-drm setup, LVDS still works even if I enable the HDMI
device in DT, as long as I do not reference it from 'connectors'.

	imx_drm: imx-drm {
		compatible = "fsl,imx-drm";
		crtcs = <&ipu1 0>, <&ipu1 1>;
		connectors = <&ldb>;
	};

Thanks for the clarification.

Shawn
diff mbox

Patch

diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index f6c5af5..f9b90e7 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -258,14 +258,14 @@  static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[ipu2_sel]         = imx_clk_mux("ipu2_sel",         base + 0x3c, 14, 2, ipu_sels,          ARRAY_SIZE(ipu_sels));
 	clk[ldb_di0_sel]      = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9,  3, ldb_di_sels,      ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
 	clk[ldb_di1_sel]      = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels,      ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
-	clk[ipu1_di0_pre_sel] = imx_clk_mux("ipu1_di0_pre_sel", base + 0x34, 6,  3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels));
-	clk[ipu1_di1_pre_sel] = imx_clk_mux("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels));
-	clk[ipu2_di0_pre_sel] = imx_clk_mux("ipu2_di0_pre_sel", base + 0x38, 6,  3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels));
-	clk[ipu2_di1_pre_sel] = imx_clk_mux("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels));
-	clk[ipu1_di0_sel]     = imx_clk_mux("ipu1_di0_sel",     base + 0x34, 0,  3, ipu1_di0_sels,     ARRAY_SIZE(ipu1_di0_sels));
-	clk[ipu1_di1_sel]     = imx_clk_mux("ipu1_di1_sel",     base + 0x34, 9,  3, ipu1_di1_sels,     ARRAY_SIZE(ipu1_di1_sels));
-	clk[ipu2_di0_sel]     = imx_clk_mux("ipu2_di0_sel",     base + 0x38, 0,  3, ipu2_di0_sels,     ARRAY_SIZE(ipu2_di0_sels));
-	clk[ipu2_di1_sel]     = imx_clk_mux("ipu2_di1_sel",     base + 0x38, 9,  3, ipu2_di1_sels,     ARRAY_SIZE(ipu2_di1_sels));
+	clk[ipu1_di0_pre_sel] = imx_clk_mux_flags("ipu1_di0_pre_sel", base + 0x34, 6,  3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+	clk[ipu1_di1_pre_sel] = imx_clk_mux_flags("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+	clk[ipu2_di0_pre_sel] = imx_clk_mux_flags("ipu2_di0_pre_sel", base + 0x38, 6,  3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+	clk[ipu2_di1_pre_sel] = imx_clk_mux_flags("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+	clk[ipu1_di0_sel]     = imx_clk_mux_flags("ipu1_di0_sel",     base + 0x34, 0,  3, ipu1_di0_sels,     ARRAY_SIZE(ipu1_di0_sels), CLK_SET_RATE_PARENT);
+	clk[ipu1_di1_sel]     = imx_clk_mux_flags("ipu1_di1_sel",     base + 0x34, 9,  3, ipu1_di1_sels,     ARRAY_SIZE(ipu1_di1_sels), CLK_SET_RATE_PARENT);
+	clk[ipu2_di0_sel]     = imx_clk_mux_flags("ipu2_di0_sel",     base + 0x38, 0,  3, ipu2_di0_sels,     ARRAY_SIZE(ipu2_di0_sels), CLK_SET_RATE_PARENT);
+	clk[ipu2_di1_sel]     = imx_clk_mux_flags("ipu2_di1_sel",     base + 0x38, 9,  3, ipu2_di1_sels,     ARRAY_SIZE(ipu2_di1_sels), CLK_SET_RATE_PARENT);
 	clk[hsi_tx_sel]       = imx_clk_mux("hsi_tx_sel",       base + 0x30, 28, 1, hsi_tx_sels,       ARRAY_SIZE(hsi_tx_sels));
 	clk[pcie_axi_sel]     = imx_clk_mux("pcie_axi_sel",     base + 0x18, 10, 1, pcie_axi_sels,     ARRAY_SIZE(pcie_axi_sels));
 	clk[ssi1_sel]         = imx_clk_fixup_mux("ssi1_sel",   base + 0x1c, 10, 2, ssi_sels,          ARRAY_SIZE(ssi_sels),          imx_cscmr1_fixup);