| Message ID | 1394633237-16837-2-git-send-email-mporter@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Mar 12, 2014 at 02:07:13PM +0000, Matt Porter wrote: > Add a DT binding for the BCM590xx PMUs. The binding inherits from > the generic regulator bindings. > > Signed-off-by: Matt Porter <mporter@linaro.org> > Reviewed-by: Tim Kryger <tim.kryger@linaro.org> > Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Looks sane to me. Acked-by: Mark Rutland <mark.rutland@arm.com> Mark. > --- > Documentation/devicetree/bindings/mfd/bcm590xx.txt | 37 ++++++++++++++++++++++ > 1 file changed, 37 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/bcm590xx.txt > > diff --git a/Documentation/devicetree/bindings/mfd/bcm590xx.txt b/Documentation/devicetree/bindings/mfd/bcm590xx.txt > new file mode 100644 > index 0000000..1fe30e2 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/bcm590xx.txt > @@ -0,0 +1,37 @@ > +------------------------------- > +BCM590xx Power Management Units > +------------------------------- > + > +Required properties: > +- compatible: "brcm,bcm59056" > +- reg: I2C slave address > +- interrupts: interrupt for the PMU. Generic interrupt client node bindings > + are described in interrupt-controller/interrupts.txt > + > +------------------ > +Voltage Regulators > +------------------ > + > +Optional child nodes: > +- regulators: container node for regulators following the generic > + regulator binding in regulator/regulator.txt > + > + The valid regulator node names for BCM59056 are: > + rfldo, camldo1, camldo2, simldo1, simldo2, sdldo, sdxldo, > + mmcldo1, mmcldo2, audldo, micldo, usbldo, vibldo, > + csr, iosr1, iosr2, msr, sdsr1, sdsr2, vsr > + > +Example: > + pmu: bcm59056@8 { > + compatible = "brcm,bcm59056"; > + reg = <0x08>; > + interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; > + regulators { > + rfldo_reg: rfldo { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + ... > + }; > + }; > -- > 1.8.4 > >
> Add a DT binding for the BCM590xx PMUs. The binding inherits from > the generic regulator bindings. > > Signed-off-by: Matt Porter <mporter@linaro.org> > Reviewed-by: Tim Kryger <tim.kryger@linaro.org> > Reviewed-by: Markus Mayer <markus.mayer@linaro.org> > --- > Documentation/devicetree/bindings/mfd/bcm590xx.txt | 37 ++++++++++++++++++++++ > 1 file changed, 37 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/bcm590xx.txt Applied with Mark's Ack.
diff --git a/Documentation/devicetree/bindings/mfd/bcm590xx.txt b/Documentation/devicetree/bindings/mfd/bcm590xx.txt new file mode 100644 index 0000000..1fe30e2 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/bcm590xx.txt @@ -0,0 +1,37 @@ +------------------------------- +BCM590xx Power Management Units +------------------------------- + +Required properties: +- compatible: "brcm,bcm59056" +- reg: I2C slave address +- interrupts: interrupt for the PMU. Generic interrupt client node bindings + are described in interrupt-controller/interrupts.txt + +------------------ +Voltage Regulators +------------------ + +Optional child nodes: +- regulators: container node for regulators following the generic + regulator binding in regulator/regulator.txt + + The valid regulator node names for BCM59056 are: + rfldo, camldo1, camldo2, simldo1, simldo2, sdldo, sdxldo, + mmcldo1, mmcldo2, audldo, micldo, usbldo, vibldo, + csr, iosr1, iosr2, msr, sdsr1, sdsr2, vsr + +Example: + pmu: bcm59056@8 { + compatible = "brcm,bcm59056"; + reg = <0x08>; + interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + regulators { + rfldo_reg: rfldo { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + + ... + }; + };