diff mbox

[1/3] IXP4xx: Fix Goramo Multilink GPIO conversion.

Message ID m3bnwxiwhj.fsf@intrepid.localdomain (mailing list archive)
State New, archived
Headers show

Commit Message

Krzysztof Halasa March 23, 2014, 12:34 a.m. UTC 
arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'set_scl':
arch/arm/mach-ixp4xx/goramo_mlr.c:82: error: implicit declaration of function 'gpio_line_set'

arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'output_control':
arch/arm/mach-ixp4xx/goramo_mlr.c:111: error: implicit declaration of function 'gpio_line_config'
arch/arm/mach-ixp4xx/goramo_mlr.c:111: error: 'IXP4XX_GPIO_OUT' undeclared

arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'hss_dcd_irq':
arch/arm/mach-ixp4xx/goramo_mlr.c:155: error: implicit declaration of function 'gpio_line_get'

arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'gmlr_init':
arch/arm/mach-ixp4xx/goramo_mlr.c:416: error: 'IXP4XX_GPIO_OUT' undeclared
arch/arm/mach-ixp4xx/goramo_mlr.c:421: error: 'IXP4XX_GPIO_IN' undeclared

Signed-off-by: Krzysztof Ha?asa <khc@pm.waw.pl>

Comments

Linus Walleij March 24, 2014, 3:27 p.m. UTC | #1 
On Sun, Mar 23, 2014 at 1:34 AM, Krzysztof Halasa <khc@pm.waw.pl> wrote:

> arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'set_scl':
> arch/arm/mach-ixp4xx/goramo_mlr.c:82: error: implicit declaration of function 'gpio_line_set'
>
> arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'output_control':
> arch/arm/mach-ixp4xx/goramo_mlr.c:111: error: implicit declaration of function 'gpio_line_config'
> arch/arm/mach-ixp4xx/goramo_mlr.c:111: error: 'IXP4XX_GPIO_OUT' undeclared
>
> arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'hss_dcd_irq':
> arch/arm/mach-ixp4xx/goramo_mlr.c:155: error: implicit declaration of function 'gpio_line_get'
>
> arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'gmlr_init':
> arch/arm/mach-ixp4xx/goramo_mlr.c:416: error: 'IXP4XX_GPIO_OUT' undeclared
> arch/arm/mach-ixp4xx/goramo_mlr.c:421: error: 'IXP4XX_GPIO_IN' undeclared
>
> Signed-off-by: Krzysztof Ha?asa <khc@pm.waw.pl>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Mea culpa.

Arnd: can you apply this one patch directly for ARM SoC fixes and
Cc: stable@vger.kernel.org on this one?

Alternatively can you send this for fixes to arm@kernel.org with Cc:
stable added Krzysztof?

Yours,
Linus Walleij
Krzysztof Halasa March 24, 2014, 8:36 p.m. UTC | #2 
Linus Walleij <linus.walleij@linaro.org> writes:

>> arch/arm/mach-ixp4xx/goramo_mlr.c:416: error: 'IXP4XX_GPIO_OUT' undeclared
>> arch/arm/mach-ixp4xx/goramo_mlr.c:421: error: 'IXP4XX_GPIO_IN' undeclared
>>
>> Signed-off-by: Krzysztof Ha?asa <khc@pm.waw.pl>
>
> Alternatively can you send this for fixes to arm@kernel.org with Cc:
> stable added Krzysztof?

Given the platform's specifics, I guess it's enough to just fix it in
mainline.
Arnd Bergmann March 26, 2014, 10:06 p.m. UTC | #3 
On Monday 24 March 2014, Linus Walleij wrote:
> On Sun, Mar 23, 2014 at 1:34 AM, Krzysztof Halasa <khc@pm.waw.pl> wrote:
> 
> > arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'set_scl':
> > arch/arm/mach-ixp4xx/goramo_mlr.c:82: error: implicit declaration of function 'gpio_line_set'
> >
> > arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'output_control':
> > arch/arm/mach-ixp4xx/goramo_mlr.c:111: error: implicit declaration of function 'gpio_line_config'
> > arch/arm/mach-ixp4xx/goramo_mlr.c:111: error: 'IXP4XX_GPIO_OUT' undeclared
> >
> > arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'hss_dcd_irq':
> > arch/arm/mach-ixp4xx/goramo_mlr.c:155: error: implicit declaration of function 'gpio_line_get'
> >
> > arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'gmlr_init':
> > arch/arm/mach-ixp4xx/goramo_mlr.c:416: error: 'IXP4XX_GPIO_OUT' undeclared
> > arch/arm/mach-ixp4xx/goramo_mlr.c:421: error: 'IXP4XX_GPIO_IN' undeclared
> >
> > Signed-off-by: Krzysztof Ha?asa <khc@pm.waw.pl>
> 
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> 
> Mea culpa.
> 
> Arnd: can you apply this one patch directly for ARM SoC fixes and
> Cc: stable@vger.kernel.org on this one?
> 
> Alternatively can you send this for fixes to arm@kernel.org with Cc:
> stable added Krzysztof?

I reverted my earlier patch and applied this instead. Thanks a lot!

Did not add a stable tag, as suggested by Krzysztof.

	Arnd
diff mbox

Patch

diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index e54ff49..80bd9d6 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -4,6 +4,7 @@ 
  */
 
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/hdlc.h>
 #include <linux/i2c-gpio.h>
 #include <linux/io.h>
@@ -79,19 +80,19 @@  static u8 control_value;
 
 static void set_scl(u8 value)
 {
-	gpio_line_set(GPIO_SCL, !!value);
+	gpio_set_value(GPIO_SCL, !!value);
 	udelay(3);
 }
 
 static void set_sda(u8 value)
 {
-	gpio_line_set(GPIO_SDA, !!value);
+	gpio_set_value(GPIO_SDA, !!value);
 	udelay(3);
 }
 
 static void set_str(u8 value)
 {
-	gpio_line_set(GPIO_STR, !!value);
+	gpio_set_value(GPIO_STR, !!value);
 	udelay(3);
 }
 
@@ -108,8 +109,8 @@  static void output_control(void)
 {
 	int i;
 
-	gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT);
-	gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT);
+	gpio_direction_output(GPIO_SCL, 1);
+	gpio_direction_output(GPIO_SDA, 1);
 
 	for (i = 0; i < 8; i++) {
 		set_scl(0);
@@ -151,8 +152,8 @@  static int hss_set_clock(int port, unsigned int clock_type)
 
 static irqreturn_t hss_dcd_irq(int irq, void *pdev)
 {
-	int i, port = (irq == IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N));
-	gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i);
+	int port = (irq == IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N));
+	int i = gpio_get_value(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N);
 	set_carrier_cb_tab[port](pdev, !i);
 	return IRQ_HANDLED;
 }
@@ -168,7 +169,7 @@  static int hss_open(int port, void *pdev,
 	else
 		irq = IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N);
 
-	gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i);
+	i = gpio_get_value(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N);
 	set_carrier_cb(pdev, !i);
 
 	set_carrier_cb_tab[!!port] = set_carrier_cb;
@@ -181,7 +182,7 @@  static int hss_open(int port, void *pdev,
 
 	set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 0);
 	output_control();
-	gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 0);
+	gpio_set_value(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 0);
 	return 0;
 }
 
@@ -193,7 +194,7 @@  static void hss_close(int port, void *pdev)
 
 	set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 1);
 	output_control();
-	gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 1);
+	gpio_set_value(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 1);
 }
 
 
@@ -413,13 +414,21 @@  static void __init gmlr_init(void)
 	if (hw_bits & CFG_HW_HAS_EEPROM)
 		device_tab[devices++] = &device_i2c; /* max index 6 */
 
-	gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT);
-	gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT);
-	gpio_line_config(GPIO_STR, IXP4XX_GPIO_OUT);
-	gpio_line_config(GPIO_HSS0_RTS_N, IXP4XX_GPIO_OUT);
-	gpio_line_config(GPIO_HSS1_RTS_N, IXP4XX_GPIO_OUT);
-	gpio_line_config(GPIO_HSS0_DCD_N, IXP4XX_GPIO_IN);
-	gpio_line_config(GPIO_HSS1_DCD_N, IXP4XX_GPIO_IN);
+	gpio_request(GPIO_SCL, "SCL/clock");
+	gpio_request(GPIO_SDA, "SDA/data");
+	gpio_request(GPIO_STR, "strobe");
+	gpio_request(GPIO_HSS0_RTS_N, "HSS0 RTS");
+	gpio_request(GPIO_HSS1_RTS_N, "HSS1 RTS");
+	gpio_request(GPIO_HSS0_DCD_N, "HSS0 DCD");
+	gpio_request(GPIO_HSS1_DCD_N, "HSS1 DCD");
+
+	gpio_direction_output(GPIO_SCL, 1);
+	gpio_direction_output(GPIO_SDA, 1);
+	gpio_direction_output(GPIO_STR, 0);
+	gpio_direction_output(GPIO_HSS0_RTS_N, 1);
+	gpio_direction_output(GPIO_HSS1_RTS_N, 1);
+	gpio_direction_input(GPIO_HSS0_DCD_N);
+	gpio_direction_input(GPIO_HSS1_DCD_N);
 	irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH);
 	irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH);