| Message ID | 1394197299-17528-6-git-send-email-ben.dooks@codethink.co.uk (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
On Fri, Mar 7, 2014 at 2:01 PM, Ben Dooks <ben.dooks@codethink.co.uk> wrote: > +++ b/Documentation/devicetree/bindings/media/rcar_vin.txt > +family of devices. The current blocks are always slaves and suppot one input support Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello. On 03/07/2014 04:01 PM, Ben Dooks wrote: > Add support for devicetree probe for the rcar-vin > driver. > Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> > --- > .../devicetree/bindings/media/rcar_vin.txt | 79 ++++++++++++++++++++++ > drivers/media/platform/soc_camera/rcar_vin.c | 67 ++++++++++++++++-- > 2 files changed, 140 insertions(+), 6 deletions(-) > create mode 100644 Documentation/devicetree/bindings/media/rcar_vin.txt > diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt > new file mode 100644 > index 0000000..105b8de > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/rcar_vin.txt > @@ -0,0 +1,79 @@ > +Renesas RCar Video Input driver (rcar_vin) > +------------------------------------------ > + > +The rcar_vin device provides video input capabilities for the Renesas R-Car > +family of devices. The current blocks are always slaves and suppot one input Support. > +channel which can be either RGB, YUYV or BT656. > + > + - compatible: Must be one of the following > + - "renesas,vin-r8a7791" for the R8A7791 device > + - "renesas,vin-r8a7790" for the R8A7790 device > + - "renesas,vin-r8a7779" for the R8A7779 device > + - "renesas,vin-r8a7778" for the R8A7778 device > + - reg: the register base and size for the device registers > + - interrupts: the interrupt for the device > + - clocks: Reference to the parent clock > + > +The per-board settings: > + - port sub-node describing a single endpoint connected to the vin s/vin/VIN/. > + as described in video-interfaces.txt[1]. Only the first one will > + be considered as each vin interface has one input port. [...] > diff --git a/drivers/media/platform/soc_camera/rcar_vin.c b/drivers/media/platform/soc_camera/rcar_vin.c > index 47516df..73c56c7 100644 > --- a/drivers/media/platform/soc_camera/rcar_vin.c > +++ b/drivers/media/platform/soc_camera/rcar_vin.c > @@ -1404,15 +1418,50 @@ MODULE_DEVICE_TABLE(platform, rcar_vin_id_table); > > static int rcar_vin_probe(struct platform_device *pdev) > { > + const struct of_device_id *match = NULL; > struct rcar_vin_priv *priv; > struct resource *mem; > struct rcar_vin_platform_data *pdata; > + unsigned int pdata_flags; > int irq, ret; > > - pdata = pdev->dev.platform_data; > - if (!pdata || !pdata->flags) { > - dev_err(&pdev->dev, "platform data not set\n"); > - return -EINVAL; > + if (pdev->dev.of_node) { > + struct v4l2_of_endpoint ep; > + struct device_node *np; > + > + match = of_match_device(of_match_ptr(rcar_vin_of_table), > + &pdev->dev); > + > + np = v4l2_of_get_next_endpoint(pdev->dev.of_node, NULL); > + if (!np) { > + dev_err(&pdev->dev, "could not find endpoint\n"); > + return -EINVAL; > + } > + > + ret = v4l2_of_parse_endpoint(np, &ep); > + if (ret) { > + dev_err(&pdev->dev, "could not parse endpoint\n"); > + return ret; > + } > + > + if (ep.bus_type == V4L2_MBUS_BT656) > + pdata_flags = RCAR_VIN_BT656; > + else { Both arms of *if* should have {} -- see Documentation/CodingStyle. > + pdata_flags = 0; > + if (ep.bus.parallel.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW) > + pdata_flags |= RCAR_VIN_HSYNC_ACTIVE_LOW; > + if (ep.bus.parallel.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW) > + pdata_flags |= RCAR_VIN_VSYNC_ACTIVE_LOW; > + } > + > + dev_dbg(&pdev->dev, "pdata_flags = %08x\n", pdata_flags); > + } else { > + pdata = pdev->dev.platform_data; Use dev_get_platdata(&pdev->dev), please. Lot of drivers have been converted to use it instead of the direct access. Haven't gotten to this one it seems. > @@ -1447,8 +1496,13 @@ static int rcar_vin_probe(struct platform_device *pdev) > priv->ici.drv_name = dev_name(&pdev->dev); > priv->ici.ops = &rcar_vin_host_ops; > > - priv->pdata_flags = pdata->flags; > - priv->chip = pdev->id_entry->driver_data; > + priv->pdata_flags = pdata_flags; > + if (!match) > + priv->chip = pdev->id_entry->driver_data; > + else > + priv->chip = (enum chip_id)match->data; > + > + Too many empty lines here, I think. WBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Ben, On Fri, 7 Mar 2014, Ben Dooks wrote: > Add support for devicetree probe for the rcar-vin > driver. Thanks for the patch. I'm afraid I don't quite understand how it is supposed to work though. AFAICS, the rcar_vin driver currently doesn't support asynchronous probing, so, your code is relying on a specific probing order? Besides, as of now soc-camera doesn't support OF probing. You mentioned, that you have a patch for soc-camera to add OF support. I think that and async probing for rcar_vin should be committed before this patch becomes meaningful. Thanks Guennadi --- Guennadi Liakhovetski, Ph.D. Freelance Open-Source Software Developer http://www.open-technology.de/ -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Ben, Since I never received a reply to this my query, I consider this your patch series suspended. Thanks Guennadi On Sat, 8 Mar 2014, Guennadi Liakhovetski wrote: > Hi Ben, > > On Fri, 7 Mar 2014, Ben Dooks wrote: > > > Add support for devicetree probe for the rcar-vin > > driver. > > Thanks for the patch. I'm afraid I don't quite understand how it is > supposed to work though. AFAICS, the rcar_vin driver currently doesn't > support asynchronous probing, so, your code is relying on a specific > probing order? Besides, as of now soc-camera doesn't support OF probing. > You mentioned, that you have a patch for soc-camera to add OF support. I > think that and async probing for rcar_vin should be committed before this > patch becomes meaningful. --- Guennadi Liakhovetski, Ph.D. Freelance Open-Source Software Developer http://www.open-technology.de/ -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 30/03/14 22:04, Guennadi Liakhovetski wrote: > Hi Ben, > > Since I never received a reply to this my query, I consider this your > patch series suspended. > > Thanks > Guennadi I meant to send out a patch series for the of probe for soc_camera. The actual rcar_vin does not need much to support async probe, it is just the soc_camera that needs sorting.
On Sun, 30 Mar 2014, Ben Dooks wrote: > On 30/03/14 22:04, Guennadi Liakhovetski wrote: > > Hi Ben, > > > > Since I never received a reply to this my query, I consider this your > > patch series suspended. > > > > Thanks > > Guennadi > > I meant to send out a patch series for the of probe for soc_camera. > The actual rcar_vin does not need much to support async probe, it is > just the soc_camera that needs sorting. But without that soc-camera DT support your patches are non-functional, right? Thanks Guennadi --- Guennadi Liakhovetski, Ph.D. Freelance Open-Source Software Developer http://www.open-technology.de/ -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 30/03/14 22:17, Guennadi Liakhovetski wrote: > On Sun, 30 Mar 2014, Ben Dooks wrote: > >> On 30/03/14 22:04, Guennadi Liakhovetski wrote: >>> Hi Ben, >>> >>> Since I never received a reply to this my query, I consider this your >>> patch series suspended. >>> >>> Thanks >>> Guennadi >> >> I meant to send out a patch series for the of probe for soc_camera. >> The actual rcar_vin does not need much to support async probe, it is >> just the soc_camera that needs sorting. > > But without that soc-camera DT support your patches are non-functional, > right? They're not much use. I've sent the soc-camera patch out now for review. I will sort out sending patches for the async device changes for the device(s) on the lager board as soon as I can get some time to re-test.
diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt new file mode 100644 index 0000000..105b8de --- /dev/null +++ b/Documentation/devicetree/bindings/media/rcar_vin.txt @@ -0,0 +1,79 @@ +Renesas RCar Video Input driver (rcar_vin) +------------------------------------------ + +The rcar_vin device provides video input capabilities for the Renesas R-Car +family of devices. The current blocks are always slaves and suppot one input +channel which can be either RGB, YUYV or BT656. + + - compatible: Must be one of the following + - "renesas,vin-r8a7791" for the R8A7791 device + - "renesas,vin-r8a7790" for the R8A7790 device + - "renesas,vin-r8a7779" for the R8A7779 device + - "renesas,vin-r8a7778" for the R8A7778 device + - reg: the register base and size for the device registers + - interrupts: the interrupt for the device + - clocks: Reference to the parent clock + +The per-board settings: + - port sub-node describing a single endpoint connected to the vin + as described in video-interfaces.txt[1]. Only the first one will + be considered as each vin interface has one input port. + + These settings are used to work out video input format and widths + into the system. + + +Device node example +------------------- + + vin0: vin@0xe6ef0000 { + compatible = "renesas,vin-r8a7790"; + clocks = <&mstp8_clks R8A7790_CLK_VIN0>; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + +Board setup example (vin1 composite video input) +------------------------------------------------ + +&i2c2 { + status = "ok"; + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + adv7180: adv7180@0x20 { + compatible = "adi,adv7180"; + reg = <0x20>; + remote = <&vin1>; + + port { + adv7180_1: endpoint { + bus-width = <8>; + remote-endpoint = <&vin1ep0>; + }; + }; + }; +}; + +/* composite video input */ +&vin1 { + pinctrl-0 = <&vin1_pins>; + pinctrl-names = "default"; + + status = "ok"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin1ep0: endpoint { + remote-endpoint = <&adv7180_1>; + bus-width = <8>; + }; + }; +}; + + + +[1] video-interfaces.txt common video media interface diff --git a/drivers/media/platform/soc_camera/rcar_vin.c b/drivers/media/platform/soc_camera/rcar_vin.c index 47516df..73c56c7 100644 --- a/drivers/media/platform/soc_camera/rcar_vin.c +++ b/drivers/media/platform/soc_camera/rcar_vin.c @@ -24,6 +24,8 @@ #include <linux/pm_runtime.h> #include <linux/slab.h> #include <linux/videodev2.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <media/soc_camera.h> #include <media/soc_mediabus.h> @@ -32,6 +34,7 @@ #include <media/v4l2-device.h> #include <media/v4l2-mediabus.h> #include <media/v4l2-subdev.h> +#include <media/v4l2-of.h> #include <media/videobuf2-dma-contig.h> #include "soc_scale_crop.h" @@ -1392,6 +1395,17 @@ static struct soc_camera_host_ops rcar_vin_host_ops = { .init_videobuf2 = rcar_vin_init_videobuf2, }; +#ifdef CONFIG_OF +static struct of_device_id rcar_vin_of_table[] = { + { .compatible = "renesas,vin-r8a7791", .data = (void *)RCAR_GEN2 }, + { .compatible = "renesas,vin-r8a7790", .data = (void *)RCAR_GEN2 }, + { .compatible = "renesas,vin-r8a7779", .data = (void *)RCAR_H1 }, + { .compatible = "renesas,vin-r8a7778", .data = (void *)RCAR_M1 }, + { }, +}; +MODULE_DEVICE_TABLE(of, rcar_vin_of_table); +#endif + static struct platform_device_id rcar_vin_id_table[] = { { "r8a7791-vin", RCAR_GEN2 }, { "r8a7790-vin", RCAR_GEN2 }, @@ -1404,15 +1418,50 @@ MODULE_DEVICE_TABLE(platform, rcar_vin_id_table); static int rcar_vin_probe(struct platform_device *pdev) { + const struct of_device_id *match = NULL; struct rcar_vin_priv *priv; struct resource *mem; struct rcar_vin_platform_data *pdata; + unsigned int pdata_flags; int irq, ret; - pdata = pdev->dev.platform_data; - if (!pdata || !pdata->flags) { - dev_err(&pdev->dev, "platform data not set\n"); - return -EINVAL; + if (pdev->dev.of_node) { + struct v4l2_of_endpoint ep; + struct device_node *np; + + match = of_match_device(of_match_ptr(rcar_vin_of_table), + &pdev->dev); + + np = v4l2_of_get_next_endpoint(pdev->dev.of_node, NULL); + if (!np) { + dev_err(&pdev->dev, "could not find endpoint\n"); + return -EINVAL; + } + + ret = v4l2_of_parse_endpoint(np, &ep); + if (ret) { + dev_err(&pdev->dev, "could not parse endpoint\n"); + return ret; + } + + if (ep.bus_type == V4L2_MBUS_BT656) + pdata_flags = RCAR_VIN_BT656; + else { + pdata_flags = 0; + if (ep.bus.parallel.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW) + pdata_flags |= RCAR_VIN_HSYNC_ACTIVE_LOW; + if (ep.bus.parallel.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW) + pdata_flags |= RCAR_VIN_VSYNC_ACTIVE_LOW; + } + + dev_dbg(&pdev->dev, "pdata_flags = %08x\n", pdata_flags); + } else { + pdata = pdev->dev.platform_data; + if (!pdata || !pdata->flags) { + dev_err(&pdev->dev, "platform data not set\n"); + return -EINVAL; + } + pdata_flags = pdata->flags; } mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -1447,8 +1496,13 @@ static int rcar_vin_probe(struct platform_device *pdev) priv->ici.drv_name = dev_name(&pdev->dev); priv->ici.ops = &rcar_vin_host_ops; - priv->pdata_flags = pdata->flags; - priv->chip = pdev->id_entry->driver_data; + priv->pdata_flags = pdata_flags; + if (!match) + priv->chip = pdev->id_entry->driver_data; + else + priv->chip = (enum chip_id)match->data; + + spin_lock_init(&priv->lock); INIT_LIST_HEAD(&priv->capture); @@ -1489,6 +1543,7 @@ static struct platform_driver rcar_vin_driver = { .driver = { .name = DRV_NAME, .owner = THIS_MODULE, + .of_match_table = of_match_ptr(rcar_vin_of_table), }, .id_table = rcar_vin_id_table, };
Add support for devicetree probe for the rcar-vin driver. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> --- .../devicetree/bindings/media/rcar_vin.txt | 79 ++++++++++++++++++++++ drivers/media/platform/soc_camera/rcar_vin.c | 67 ++++++++++++++++-- 2 files changed, 140 insertions(+), 6 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/rcar_vin.txt