[v2,09/12] ARM: config: append hip04_defconfig

Commit Message

Haojian Zhuang April 8, 2014, 8 a.m. UTC

Select HiP04 SoC configuration by hip04_defconfig.

Signed-off-by: Haojian Zhuang <[e-mail]>
---
 arch/arm/configs/hip04_defconfig | 67 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 67 insertions(+)
 create mode 100644 arch/arm/configs/hip04_defconfig

Comments

Arnd Bergmann April 8, 2014, 11:18 a.m. UTC | #1

On Tuesday 08 April 2014 16:00:49 Haojian Zhuang wrote:
> Select HiP04 SoC configuration by hip04_defconfig.
> 
> Signed-off-by: Haojian Zhuang <[e-mail]>
> ---
>  arch/arm/configs/hip04_defconfig | 67 ++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 67 insertions(+)
>  create mode 100644 arch/arm/configs/hip04_defconfig

Is it necessary to have a separate defconfig for this?

Since this is a fairly generic platform, I'd prefer to only enable
it in the standard defconfigs like multi_v7_defconfig.

It's probably time now to add a multi_v7_lpae_defconfig though.
Maybe someone has other ideas, we have talked about the split
between the defconfigs before. I think the latest suggestion
was to remove multi_v7_defconfig and replace it with one that
enables both v6 and v7, and another one that only enables
v7 with LPAE (omap5, exynos5, mvebu, sunxi, hip04, vexpress,
shmobile, highbank, keystone, qcom)

	Arnd

Patch

diff --git a/arch/arm/configs/hip04_defconfig b/arch/arm/configs/hip04_defconfig
new file mode 100644
index 0000000..b6fa635
--- /dev/null
+++ b/arch/arm/configs/hip04_defconfig
@@ -0,0 +1,67 @@ 
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_RD_GZIP=y
+# CONFIG_ARCH_MULTI_V6 is not set
+# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_MULTI_V7_LPAE=y
+CONFIG_ARCH_HISI=y
+CONFIG_ARCH_HIP04=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=16
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
+CONFIG_HIGHMEM=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_NETDEVICES=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_DRM=y
+CONFIG_FB_SIMPLE=y
+CONFIG_RTC_CLASS=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_UART_8250=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_LOCKUP_DETECTOR=y
+CONFIG_DEBUG_USER=y