| Message ID | 20140419025316.2408.29771.stgit@amt.stowe (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Fri, Apr 18, 2014 at 08:53:16PM -0600, Myron Stowe wrote: > From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> > > AMD hostbridges gnenerally show up as PCI device 0:18.0. This patch adds > logic to automatically probe the device at this location and check PCI > device class code. > > This patch supports platforms with the following AMD hostbridge types: > (K8, family10h, 11h, 12h, 14h 15h and 16h processors). > > Reference(s): > https://bugzilla.kernel.org/show_bug.cgi?id=72051 > Advanced Micro Devices (AMD), "BIOS and Kernel Developer's > Guide (BKDG) for AMD Family 15h Models 00h-0fh Processors." Section > 3.4 Device [1F:18]h Function 1 Configuration Registers; D18F1x[EC:E0] > Configuration Map, 42301 Rev 3.12 - October 11, 2012. > > Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> > Signed-off-by: Myron Stowe <myron.stowe@redhat.com> > Tested-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> > --- > > arch/x86/pci/amd_bus.c | 71 ++++++++++++++++++++++++++++++++---------------- > 1 files changed, 47 insertions(+), 24 deletions(-) > > diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c > index e88f4c5..c8cd75c 100644 > --- a/arch/x86/pci/amd_bus.c > +++ b/arch/x86/pci/amd_bus.c > @@ -11,27 +11,34 @@ > > #include "bus_numa.h" > > +#define AMD_NB_F0_NODE_ID 0x60 > +#define AMD_NB_F0_UNIT_ID 0x64 > +#define AMD_NB_F1_CONFIG_MAP_REG 0xe0 > + > +#define RANGE_NUM 16 > +#define AMD_NB_F1_CONFIG_MAP_RANGES 4 > + > /* > - * This discovers the pcibus <-> node mapping on AMD K8. > - * also get peer root bus resource for io,mmio > + * This discovers the pcibus <-> node mapping on AMD K8, Family 10h, 12h, > + * 14h, 15h, and 16h processor based systems. This also gets peer root bus > + * resources corresponding to I/O and MMIO addresses. > */ > > -struct pci_hostbridge_probe { > +struct amd_hostbridge { > u32 bus; > u32 slot; > - u32 vendor; > u32 device; > }; > > -static struct pci_hostbridge_probe pci_probes[] __initdata = { > - { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1100 }, > - { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 }, > - { 0xff, 0, PCI_VENDOR_ID_AMD, 0x1200 }, > - { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1300 }, > +static struct amd_hostbridge hb_probes[] __initdata = { > + /* Standard AMD Hostbriges are at bus 0x0 slot 0x18. > + * In case of PCI_ANY_ID, the logic will try matching > + * PCI_CLASS_BRIDGE_HOST instead. > + */ Standard kernel comment style: /* * Something interesting for the code below. * This is the second comment line. */ > + { 0x0 , 0x18, PCI_ANY_ID }, > + { 0xff, 0 , PCI_DEVICE_ID_AMD_10H_NB_HT }, > }; > > -#define RANGE_NUM 16 > - > static struct pci_root_info __init *find_pci_root_info(int node, int link) > { > struct pci_root_info *info; > @@ -75,31 +82,47 @@ static int __init early_fill_mp_bus_info(void) Btw, this function is huuuge. It could use a splitup some day. > return -1; > > found = false; > - for (i = 0; i < ARRAY_SIZE(pci_probes); i++) { > + for (i = 0; i < ARRAY_SIZE(hb_probes); i++) { > u32 id; > u16 device; > u16 vendor; > + u32 class; > > - bus = pci_probes[i].bus; > - slot = pci_probes[i].slot; > + bus = hb_probes[i].bus; > + slot = hb_probes[i].slot; > id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID); > - > vendor = id & 0xffff; > device = (id>>16) & 0xffff; > - if (pci_probes[i].vendor == vendor && > - pci_probes[i].device == device) { > - found = true; > - break; > + class = read_pci_config(bus, slot, 0, > + PCI_CLASS_REVISION) >> 16; > + > + if (PCI_VENDOR_ID_AMD == vendor) { Flip comparison: if (vendor == PCI_VENDOR_ID_AMD) and then save yourself another indentation level: if (vendor != PCI_VENDOR_ID_AMD) continue; > + if (hb_probes[i].device == device) { > + found = true; > + break; > + } > + > + if ((hb_probes[i].device == PCI_ANY_ID) && > + (class == PCI_CLASS_BRIDGE_HOST)) { > + hb_probes[i].device = device; > + found = true; > + break; > + } > } > } > > - if (!found) > + if (!found) { > + pr_warn("AMD hostbridge not found\n"); > return 0; > + } I guess this should return a negative value... Not that it matters much from looking at the call site in the amd_postcore_init initcall. > > - for (i = 0; i < 4; i++) { > + pr_debug("Found AMD hostbridge at %x:%x.0\n", bus, slot); Why not pr_info? I think this is useful info we want to print out at default level.
On Sat, Apr 19, 2014 at 5:31 AM, Borislav Petkov <bp@suse.de> wrote: > On Fri, Apr 18, 2014 at 08:53:16PM -0600, Myron Stowe wrote: >> From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> >> >> AMD hostbridges gnenerally show up as PCI device 0:18.0. This patch adds >> logic to automatically probe the device at this location and check PCI >> device class code. >> >> This patch supports platforms with the following AMD hostbridge types: >> (K8, family10h, 11h, 12h, 14h 15h and 16h processors). >> >> Reference(s): >> https://bugzilla.kernel.org/show_bug.cgi?id=72051 >> Advanced Micro Devices (AMD), "BIOS and Kernel Developer's >> Guide (BKDG) for AMD Family 15h Models 00h-0fh Processors." Section >> 3.4 Device [1F:18]h Function 1 Configuration Registers; D18F1x[EC:E0] >> Configuration Map, 42301 Rev 3.12 - October 11, 2012. >> >> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> >> Signed-off-by: Myron Stowe <myron.stowe@redhat.com> >> Tested-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> >> --- >> >> arch/x86/pci/amd_bus.c | 71 ++++++++++++++++++++++++++++++++---------------- >> 1 files changed, 47 insertions(+), 24 deletions(-) >> >> diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c >> index e88f4c5..c8cd75c 100644 >> --- a/arch/x86/pci/amd_bus.c >> +++ b/arch/x86/pci/amd_bus.c >> @@ -11,27 +11,34 @@ >> >> #include "bus_numa.h" >> >> +#define AMD_NB_F0_NODE_ID 0x60 >> +#define AMD_NB_F0_UNIT_ID 0x64 >> +#define AMD_NB_F1_CONFIG_MAP_REG 0xe0 >> + >> +#define RANGE_NUM 16 >> +#define AMD_NB_F1_CONFIG_MAP_RANGES 4 >> + >> /* >> - * This discovers the pcibus <-> node mapping on AMD K8. >> - * also get peer root bus resource for io,mmio >> + * This discovers the pcibus <-> node mapping on AMD K8, Family 10h, 12h, >> + * 14h, 15h, and 16h processor based systems. This also gets peer root bus >> + * resources corresponding to I/O and MMIO addresses. >> */ >> >> -struct pci_hostbridge_probe { >> +struct amd_hostbridge { >> u32 bus; >> u32 slot; >> - u32 vendor; >> u32 device; >> }; >> >> -static struct pci_hostbridge_probe pci_probes[] __initdata = { >> - { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1100 }, >> - { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 }, >> - { 0xff, 0, PCI_VENDOR_ID_AMD, 0x1200 }, >> - { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1300 }, >> +static struct amd_hostbridge hb_probes[] __initdata = { >> + /* Standard AMD Hostbriges are at bus 0x0 slot 0x18. >> + * In case of PCI_ANY_ID, the logic will try matching >> + * PCI_CLASS_BRIDGE_HOST instead. >> + */ > > Standard kernel comment style: > > /* > * Something interesting for the code below. > * This is the second comment line. > */ > I went ahead and made this change in patch 1/5 (even though most non-functional changes are in patch 3/5) as it seems to belong here. >> + { 0x0 , 0x18, PCI_ANY_ID }, >> + { 0xff, 0 , PCI_DEVICE_ID_AMD_10H_NB_HT }, >> }; >> >> -#define RANGE_NUM 16 >> - >> static struct pci_root_info __init *find_pci_root_info(int node, int link) >> { >> struct pci_root_info *info; >> @@ -75,31 +82,47 @@ static int __init early_fill_mp_bus_info(void) > > Btw, this function is huuuge. It could use a splitup some day. > Yes, Suravee did split this up in patch 3/5 >> return -1; >> >> found = false; >> - for (i = 0; i < ARRAY_SIZE(pci_probes); i++) { >> + for (i = 0; i < ARRAY_SIZE(hb_probes); i++) { >> u32 id; >> u16 device; >> u16 vendor; >> + u32 class; >> >> - bus = pci_probes[i].bus; >> - slot = pci_probes[i].slot; >> + bus = hb_probes[i].bus; >> + slot = hb_probes[i].slot; >> id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID); >> - >> vendor = id & 0xffff; >> device = (id>>16) & 0xffff; >> - if (pci_probes[i].vendor == vendor && >> - pci_probes[i].device == device) { >> - found = true; >> - break; >> + class = read_pci_config(bus, slot, 0, >> + PCI_CLASS_REVISION) >> 16; >> + >> + if (PCI_VENDOR_ID_AMD == vendor) { > > Flip comparison: > > if (vendor == PCI_VENDOR_ID_AMD) > > and then save yourself another indentation level: > > if (vendor != PCI_VENDOR_ID_AMD) > continue; > Yes, much better >> + if (hb_probes[i].device == device) { >> + found = true; >> + break; >> + } >> + >> + if ((hb_probes[i].device == PCI_ANY_ID) && >> + (class == PCI_CLASS_BRIDGE_HOST)) { >> + hb_probes[i].device = device; >> + found = true; >> + break; >> + } >> } >> } >> >> - if (!found) >> + if (!found) { >> + pr_warn("AMD hostbridge not found\n"); >> return 0; >> + } > > I guess this should return a negative value... Not that it matters much > from looking at the call site in the amd_postcore_init initcall. > Patch 3/5 cleans this up. >> >> - for (i = 0; i < 4; i++) { >> + pr_debug("Found AMD hostbridge at %x:%x.0\n", bus, slot); > > Why not pr_info? I think this is useful info we want to print out at > default level. Sure, ok ;) > > -- > Regards/Gruss, > Boris. > > Sent from a fat crate under my desk. Formatting is fine. > -- > -- > To unsubscribe from this list: send the line "unsubscribe linux-acpi" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c index e88f4c5..c8cd75c 100644 --- a/arch/x86/pci/amd_bus.c +++ b/arch/x86/pci/amd_bus.c @@ -11,27 +11,34 @@ #include "bus_numa.h" +#define AMD_NB_F0_NODE_ID 0x60 +#define AMD_NB_F0_UNIT_ID 0x64 +#define AMD_NB_F1_CONFIG_MAP_REG 0xe0 + +#define RANGE_NUM 16 +#define AMD_NB_F1_CONFIG_MAP_RANGES 4 + /* - * This discovers the pcibus <-> node mapping on AMD K8. - * also get peer root bus resource for io,mmio + * This discovers the pcibus <-> node mapping on AMD K8, Family 10h, 12h, + * 14h, 15h, and 16h processor based systems. This also gets peer root bus + * resources corresponding to I/O and MMIO addresses. */ -struct pci_hostbridge_probe { +struct amd_hostbridge { u32 bus; u32 slot; - u32 vendor; u32 device; }; -static struct pci_hostbridge_probe pci_probes[] __initdata = { - { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1100 }, - { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 }, - { 0xff, 0, PCI_VENDOR_ID_AMD, 0x1200 }, - { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1300 }, +static struct amd_hostbridge hb_probes[] __initdata = { + /* Standard AMD Hostbriges are at bus 0x0 slot 0x18. + * In case of PCI_ANY_ID, the logic will try matching + * PCI_CLASS_BRIDGE_HOST instead. + */ + { 0x0 , 0x18, PCI_ANY_ID }, + { 0xff, 0 , PCI_DEVICE_ID_AMD_10H_NB_HT }, }; -#define RANGE_NUM 16 - static struct pci_root_info __init *find_pci_root_info(int node, int link) { struct pci_root_info *info; @@ -75,31 +82,47 @@ static int __init early_fill_mp_bus_info(void) return -1; found = false; - for (i = 0; i < ARRAY_SIZE(pci_probes); i++) { + for (i = 0; i < ARRAY_SIZE(hb_probes); i++) { u32 id; u16 device; u16 vendor; + u32 class; - bus = pci_probes[i].bus; - slot = pci_probes[i].slot; + bus = hb_probes[i].bus; + slot = hb_probes[i].slot; id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID); - vendor = id & 0xffff; device = (id>>16) & 0xffff; - if (pci_probes[i].vendor == vendor && - pci_probes[i].device == device) { - found = true; - break; + class = read_pci_config(bus, slot, 0, + PCI_CLASS_REVISION) >> 16; + + if (PCI_VENDOR_ID_AMD == vendor) { + if (hb_probes[i].device == device) { + found = true; + break; + } + + if ((hb_probes[i].device == PCI_ANY_ID) && + (class == PCI_CLASS_BRIDGE_HOST)) { + hb_probes[i].device = device; + found = true; + break; + } } } - if (!found) + if (!found) { + pr_warn("AMD hostbridge not found\n"); return 0; + } - for (i = 0; i < 4; i++) { + pr_debug("Found AMD hostbridge at %x:%x.0\n", bus, slot); + + for (i = 0; i < AMD_NB_F1_CONFIG_MAP_RANGES; i++) { int min_bus; int max_bus; - reg = read_pci_config(bus, slot, 1, 0xe0 + (i << 2)); + reg = read_pci_config(bus, slot, 1, + AMD_NB_F1_CONFIG_MAP_REG + (i << 2)); /* Check if that register is enabled for bus range */ if ((reg & 7) != 3) @@ -114,9 +137,9 @@ static int __init early_fill_mp_bus_info(void) } /* get the default node and link for left over res */ - reg = read_pci_config(bus, slot, 0, 0x60); + reg = read_pci_config(bus, slot, 0, AMD_NB_F0_NODE_ID); def_node = (reg >> 8) & 0x07; - reg = read_pci_config(bus, slot, 0, 0x64); + reg = read_pci_config(bus, slot, 0, AMD_NB_F0_UNIT_ID); def_link = (reg >> 8) & 0x03; memset(range, 0, sizeof(range));