| Message ID | 1398192739-8901-2-git-send-email-d-gerlach@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 04/22/2014 01:52 PM, Dave Gerlach wrote: > The VTT regulator for DDR3 termination on the am437x-gp-evm is > controlled by a gpio. It is configured by the bootloader so here we > define an always-on, fixed voltage regulator to hold the gpio. > > Signed-off-by: Dave Gerlach <d-gerlach@ti.com> > --- > arch/arm/boot/dts/am437x-gp-evm.dts | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts > index a055f7f..e68d12c 100644 > --- a/arch/arm/boot/dts/am437x-gp-evm.dts > +++ b/arch/arm/boot/dts/am437x-gp-evm.dts > @@ -27,6 +27,17 @@ > enable-active-high; > }; > > + vtt_fixed: fixedregulator-vtt { Would you like to consider any explicit pinctrl here? > + compatible = "regulator-fixed"; > + regulator-name = "vtt_fixed"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + regulator-boot-on; > + enable-active-high; > + gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; > + }; > + > backlight { > compatible = "pwm-backlight"; > pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; > Do we still need https://patchwork.kernel.org/patch/3871201/ (prevent hwmod from resetting GPIO5) ?
On 04/22/2014 01:58 PM, Nishanth Menon wrote: > On 04/22/2014 01:52 PM, Dave Gerlach wrote: >> The VTT regulator for DDR3 termination on the am437x-gp-evm is >> controlled by a gpio. It is configured by the bootloader so here we >> define an always-on, fixed voltage regulator to hold the gpio. >> >> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> >> --- >> arch/arm/boot/dts/am437x-gp-evm.dts | 11 +++++++++++ >> 1 file changed, 11 insertions(+) >> >> diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts >> index a055f7f..e68d12c 100644 >> --- a/arch/arm/boot/dts/am437x-gp-evm.dts >> +++ b/arch/arm/boot/dts/am437x-gp-evm.dts >> @@ -27,6 +27,17 @@ >> enable-active-high; >> }; >> >> + vtt_fixed: fixedregulator-vtt { > > Would you like to consider any explicit pinctrl here? Yes, it's a good idea for me to add that in for next version. > >> + compatible = "regulator-fixed"; >> + regulator-name = "vtt_fixed"; >> + regulator-min-microvolt = <3300000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-always-on; >> + regulator-boot-on; >> + enable-active-high; >> + gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; >> + }; >> + >> backlight { >> compatible = "pwm-backlight"; >> pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; >> > > Do we still need https://patchwork.kernel.org/patch/3871201/ (prevent > hwmod from resetting GPIO5) ? > Yes, without preventing the reset boot still hangs. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index a055f7f..e68d12c 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -27,6 +27,17 @@ enable-active-high; }; + vtt_fixed: fixedregulator-vtt { + compatible = "regulator-fixed"; + regulator-name = "vtt_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; + }; + backlight { compatible = "pwm-backlight"; pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
The VTT regulator for DDR3 termination on the am437x-gp-evm is controlled by a gpio. It is configured by the bootloader so here we define an always-on, fixed voltage regulator to hold the gpio. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> --- arch/arm/boot/dts/am437x-gp-evm.dts | 11 +++++++++++ 1 file changed, 11 insertions(+)