| Message ID | 1399858236-29027-5-git-send-email-haojian.zhuang@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, May 12, 2014 at 09:30:35AM +0800, Haojian Zhuang wrote: > From: Haifeng Yan <yanhaifeng@gmail.com> > > Add dts file for Hisilicon x5hd2 development kit board. > > Signed-off-by: Haifeng Yan <yanhaifeng@gmail.com> > Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/hix5hd2-dkb.dts | 56 +++++++++++ > arch/arm/boot/dts/hix5hd2.dtsi | 189 ++++++++++++++++++++++++++++++++++++++ > 3 files changed, 246 insertions(+) > create mode 100644 arch/arm/boot/dts/hix5hd2-dkb.dts > create mode 100644 arch/arm/boot/dts/hix5hd2.dtsi > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 7119bca..54249d9 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ > exynos5440-sd5v1.dtb \ > exynos5440-ssdk5440.dtb > dtb-$(CONFIG_ARCH_HI3xxx) += hi3620-hi4511.dtb > +dtb-$(CONFIG_ARCH_HIX5HD2) += hix5hd2-dkb.dtb > dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \ > ecx-2000.dtb > dtb-$(CONFIG_ARCH_HIP04) += hip04-d01.dtb > diff --git a/arch/arm/boot/dts/hix5hd2-dkb.dts b/arch/arm/boot/dts/hix5hd2-dkb.dts > new file mode 100644 > index 0000000..644458a > --- /dev/null > +++ b/arch/arm/boot/dts/hix5hd2-dkb.dts > @@ -0,0 +1,56 @@ > +/* > + * Copyright (c) 2013 Linaro Ltd. > + * Copyright (c) 2013 Hisilicon Limited. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * publishhed by the Free Software Foundation. > + */ > + > +/dts-v1/; > +#include "hix5hd2.dtsi" > + > +/ { > + model = "Hisilicon HiX5HD2 Development Board"; > + compatible = "hisilicon,hix5hd2-dkb"; This should have a compatible of the SoC as well (as less specific). > + chosen { > + bootargs = "console=ttyAMA0,115200"; > + }; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + > + cpu@0 { > + compatible = "arm,cortex-a9"; > + device_type = "cpu"; > + reg = <0>; > + next-level-cache = <&l2>; > + }; > + > + cpu@1 { > + compatible = "arm,cortex-a9"; > + device_type = "cpu"; > + reg = <1>; > + next-level-cache = <&l2>; > + }; > + }; > + > + memory { > + device_type = "memory"; > + reg = <0x00000000 0x80000000>; > + }; > + > + soc { > + amba { > + timer0: timer@f8002000 { > + status = "okay"; > + }; > + > + uart0: uart@f8b00000 { > + status = "okay"; > + }; This is much easier if you use a label-based syntax: &uart0 { status = "okay"; }; Then you don't need to mirror the hierarchy, etc. > diff --git a/arch/arm/boot/dts/hix5hd2.dtsi b/arch/arm/boot/dts/hix5hd2.dtsi > new file mode 100644 > index 0000000..d8a3ad4 > --- /dev/null > +++ b/arch/arm/boot/dts/hix5hd2.dtsi > @@ -0,0 +1,189 @@ > +/* > + * Copyright (c) 2013 Linaro Ltd. > + * Copyright (c) 2013 Hisilicon Limited. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * publishhed by the Free Software Foundation. > + */ > + > +#include "skeleton.dtsi" > +#include <dt-bindings/clock/hix5hd2-clock.h> > + > +/ { You might want to add the compatible string here that will be shared for all boards of this platform. Each dts will of course override it, but it makes it easy for them to see what they should append to their more specific compatible values. > + aliases { > + serial0 = &uart0; > + }; > + > + gic: interrupt-controller@f8a01000 { > + compatible = "arm,cortex-a9-gic"; > + #interrupt-cells = <3>; > + #address-cells = <0>; > + interrupt-controller; > + /* gic dist base, gic cpu base */ > + reg = <0xf8a01000 0x1000>, <0xf8a00100 0x100>; > + }; > + > + soc { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "simple-bus"; > + device_type = "soc"; > + interrupt-parent = <&gic>; > + ranges; > + > + amba { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "arm,amba-bus"; > + ranges; > + > + timer0: timer@f8002000 { > + compatible = "arm,sp804", "arm,primecell"; > + reg = <0xf8002000 0x1000>; > + /* timer00 & timer01 */ > + interrupts = <0 24 4>; > + clocks = <&clock HIX5HD2_FIXED_24M>; > + status = "disabled"; > + }; > + > + timer1: timer@f8a29000 { > + /* > + * Only used in NORMAL state, not available ins > + * SLOW or DOZE state. > + * The rate is fixed in 24MHz. > + */ > + compatible = "arm,sp804", "arm,primecell"; > + reg = <0xf8a29000 0x1000>; > + /* timer10 & timer11 */ > + interrupts = <0 25 4>; > + clocks = <&clock HIX5HD2_FIXED_24M>; > + status = "disabled"; > + }; > + > + timer2: timer@f8a2a000 { > + compatible = "arm,sp804", "arm,primecell"; > + reg = <0xf8a2a000 0x1000>; > + /* timer20 & timer21 */ > + interrupts = <0 26 4>; > + clocks = <&clock HIX5HD2_FIXED_24M>; > + status = "disabled"; > + }; > + > + timer3: timer@f8a2b000 { > + compatible = "arm,sp804", "arm,primecell"; > + reg = <0xf8a2b000 0x1000>; > + /* timer30 & timer31 */ > + interrupts = <0 27 4>; > + clocks = <&clock HIX5HD2_FIXED_24M>; > + status = "disabled"; > + }; > + > + timer4: timer@f8a81000 { > + compatible = "arm,sp804", "arm,primecell"; > + reg = <0xf8a81000 0x1000>; > + /* timer30 & timer31 */ > + interrupts = <0 28 4>; > + clocks = <&clock HIX5HD2_FIXED_24M>; > + status = "disabled"; > + }; > + > + uart0: uart@f8b00000 { > + compatible = "arm,pl011", "arm,primecell"; > + reg = <0xf8b00000 0x1000>; > + interrupts = <0 49 4>; > + clocks = <&clock HIX5HD2_FIXED_83M>; > + clock-names = "apb_pclk"; > + status = "disabled"; > + }; > + > + uart1: uart@f8006000 { > + compatible = "arm,pl011", "arm,primecell"; > + reg = <0xf8006000 0x1000>; > + interrupts = <0 50 4>; > + clocks = <&clock HIX5HD2_FIXED_83M>; > + clock-names = "apb_pclk"; > + status = "disabled"; > + }; > + > + uart2: uart@f8b02000 { > + compatible = "arm,pl011", "arm,primecell"; > + reg = <0xf8b02000 0x1000>; > + interrupts = <0 51 4>; > + clocks = <&clock HIX5HD2_FIXED_83M>; > + clock-names = "apb_pclk"; > + status = "disabled"; > + }; > + > + uart3: uart@f8b03000 { > + compatible = "arm,pl011", "arm,primecell"; > + reg = <0xf8b03000 0x1000>; > + interrupts = <0 52 4>; > + clocks = <&clock HIX5HD2_FIXED_83M>; > + clock-names = "apb_pclk"; > + status = "disabled"; > + }; > + > + uart4: uart@f8b04000 { > + compatible = "arm,pl011", "arm,primecell"; > + reg = <0xf8b04000 0x1000>; > + interrupts = <0 53 4>; > + clocks = <&clock HIX5HD2_FIXED_83M>; > + clock-names = "apb_pclk"; > + status = "disabled"; > + }; > + }; > + > + local_timer@f8a00600 { local-timer > + compatible = "arm,cortex-a9-twd-timer"; > + reg = <0xf8a00600 0x20>; > + interrupts = <1 13 0xf01>; > + }; > + > + l2: l2-cache { > + compatible = "arm,pl310-cache"; > + reg = <0xf8a10000 0x100000>; > + interrupts = <0 15 4>; > + cache-unified; > + cache-level = <2>; > + hisilicon,l2cache-aux = <0x00050000 0xfff0ffff>; > + }; > + > + /* unremovable emmc as mmcblk0 */ > + dwmmc_1: dwmmc1@f9830000 { The node name should be generic. Most other platforms use "mmc". No enumerating suffix in the node name. > + compatible = "hisilicon,hi3716-dw-mshc"; > + reg = <0xf9830000 0x1000>; > + interrupts = <0 35 4>; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&clock HIX5HD2_MMC_CIU_RST>, <&clock HIX5HD2_MMC_BIU_CLK>; > + clock-names = "ciu", "biu"; > + }; > + > + > + sctrl@f8000000 { system-controller > + compatible = "hisilicon,sysctrl"; > + reg = <0xf8000000 0x1000>; > + smp_reg = <0xc0>; > + reboot_reg = <0x4>; > + }; > + > + clkbase@f8a22000 { What's this? Needs a binding. Name should probably be something else too (clock-controller?) > + compatible = "hisilicon,clkbase"; > + #address-cells = <1>; > + #size-cells = <1>; > + reg = <0xf8a22000 0x1000>; > + ranges = <0x0 0xf8a22000 0x1000>; > + clock: clock@0 { > + compatible = "hisilicon,hix5hd2-clock"; > + reg = <0x0 0x1000>; > + #clock-cells = <1>; > + }; > + }; > + > + cpuctrl@f8a22000 { > + compatible = "hisilicon,cpuctrl"; > + reg = <0xf8a22000 0x2000>; > + }; Again, as pointed out in one of the other patches, this needs a binding. -Olof
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 7119bca..54249d9 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos5440-sd5v1.dtb \ exynos5440-ssdk5440.dtb dtb-$(CONFIG_ARCH_HI3xxx) += hi3620-hi4511.dtb +dtb-$(CONFIG_ARCH_HIX5HD2) += hix5hd2-dkb.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \ ecx-2000.dtb dtb-$(CONFIG_ARCH_HIP04) += hip04-d01.dtb diff --git a/arch/arm/boot/dts/hix5hd2-dkb.dts b/arch/arm/boot/dts/hix5hd2-dkb.dts new file mode 100644 index 0000000..644458a --- /dev/null +++ b/arch/arm/boot/dts/hix5hd2-dkb.dts @@ -0,0 +1,56 @@ +/* + * Copyright (c) 2013 Linaro Ltd. + * Copyright (c) 2013 Hisilicon Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +/dts-v1/; +#include "hix5hd2.dtsi" + +/ { + model = "Hisilicon HiX5HD2 Development Board"; + compatible = "hisilicon,hix5hd2-dkb"; + + chosen { + bootargs = "console=ttyAMA0,115200"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&l2>; + }; + + cpu@1 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&l2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x80000000>; + }; + + soc { + amba { + timer0: timer@f8002000 { + status = "okay"; + }; + + uart0: uart@f8b00000 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/hix5hd2.dtsi b/arch/arm/boot/dts/hix5hd2.dtsi new file mode 100644 index 0000000..d8a3ad4 --- /dev/null +++ b/arch/arm/boot/dts/hix5hd2.dtsi @@ -0,0 +1,189 @@ +/* + * Copyright (c) 2013 Linaro Ltd. + * Copyright (c) 2013 Hisilicon Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +#include "skeleton.dtsi" +#include <dt-bindings/clock/hix5hd2-clock.h> + +/ { + aliases { + serial0 = &uart0; + }; + + gic: interrupt-controller@f8a01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + /* gic dist base, gic cpu base */ + reg = <0xf8a01000 0x1000>, <0xf8a00100 0x100>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + device_type = "soc"; + interrupt-parent = <&gic>; + ranges; + + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus"; + ranges; + + timer0: timer@f8002000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0xf8002000 0x1000>; + /* timer00 & timer01 */ + interrupts = <0 24 4>; + clocks = <&clock HIX5HD2_FIXED_24M>; + status = "disabled"; + }; + + timer1: timer@f8a29000 { + /* + * Only used in NORMAL state, not available ins + * SLOW or DOZE state. + * The rate is fixed in 24MHz. + */ + compatible = "arm,sp804", "arm,primecell"; + reg = <0xf8a29000 0x1000>; + /* timer10 & timer11 */ + interrupts = <0 25 4>; + clocks = <&clock HIX5HD2_FIXED_24M>; + status = "disabled"; + }; + + timer2: timer@f8a2a000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0xf8a2a000 0x1000>; + /* timer20 & timer21 */ + interrupts = <0 26 4>; + clocks = <&clock HIX5HD2_FIXED_24M>; + status = "disabled"; + }; + + timer3: timer@f8a2b000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0xf8a2b000 0x1000>; + /* timer30 & timer31 */ + interrupts = <0 27 4>; + clocks = <&clock HIX5HD2_FIXED_24M>; + status = "disabled"; + }; + + timer4: timer@f8a81000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0xf8a81000 0x1000>; + /* timer30 & timer31 */ + interrupts = <0 28 4>; + clocks = <&clock HIX5HD2_FIXED_24M>; + status = "disabled"; + }; + + uart0: uart@f8b00000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xf8b00000 0x1000>; + interrupts = <0 49 4>; + clocks = <&clock HIX5HD2_FIXED_83M>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart1: uart@f8006000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xf8006000 0x1000>; + interrupts = <0 50 4>; + clocks = <&clock HIX5HD2_FIXED_83M>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart2: uart@f8b02000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xf8b02000 0x1000>; + interrupts = <0 51 4>; + clocks = <&clock HIX5HD2_FIXED_83M>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart3: uart@f8b03000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xf8b03000 0x1000>; + interrupts = <0 52 4>; + clocks = <&clock HIX5HD2_FIXED_83M>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart4: uart@f8b04000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xf8b04000 0x1000>; + interrupts = <0 53 4>; + clocks = <&clock HIX5HD2_FIXED_83M>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + }; + + local_timer@f8a00600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0xf8a00600 0x20>; + interrupts = <1 13 0xf01>; + }; + + l2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0xf8a10000 0x100000>; + interrupts = <0 15 4>; + cache-unified; + cache-level = <2>; + hisilicon,l2cache-aux = <0x00050000 0xfff0ffff>; + }; + + /* unremovable emmc as mmcblk0 */ + dwmmc_1: dwmmc1@f9830000 { + compatible = "hisilicon,hi3716-dw-mshc"; + reg = <0xf9830000 0x1000>; + interrupts = <0 35 4>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock HIX5HD2_MMC_CIU_RST>, <&clock HIX5HD2_MMC_BIU_CLK>; + clock-names = "ciu", "biu"; + }; + + + sctrl@f8000000 { + compatible = "hisilicon,sysctrl"; + reg = <0xf8000000 0x1000>; + smp_reg = <0xc0>; + reboot_reg = <0x4>; + }; + + clkbase@f8a22000 { + compatible = "hisilicon,clkbase"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xf8a22000 0x1000>; + ranges = <0x0 0xf8a22000 0x1000>; + clock: clock@0 { + compatible = "hisilicon,hix5hd2-clock"; + reg = <0x0 0x1000>; + #clock-cells = <1>; + }; + }; + + cpuctrl@f8a22000 { + compatible = "hisilicon,cpuctrl"; + reg = <0xf8a22000 0x2000>; + }; + }; +};