@@ -27,6 +27,7 @@
#include <linux/clk.h>
#include <linux/mutex.h>
#include <linux/dma/ipu-dma.h>
+#include <linux/backlight.h>
#include <linux/platform_data/dma-imx.h>
#include <linux/platform_data/video-mx3fb.h>
@@ -34,6 +35,12 @@
#include <asm/io.h>
#include <asm/uaccess.h>
+#if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) || \
+ (defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE) && \
+ defined(CONFIG_MX3FB_MODULE))
+#define PWM_BACKLIGHT_AVAILABLE
+#endif
+
#define MX3FB_NAME "mx3_sdc_fb"
#define MX3FB_REG_OFFSET 0xB4
@@ -242,6 +249,10 @@ struct mx3fb_data {
spinlock_t lock;
struct device *dev;
+#ifdef PWM_BACKLIGHT_AVAILABLE
+ struct backlight_device *bl;
+#endif
+
uint32_t h_start_width;
uint32_t v_start_width;
enum disp_data_mapping disp_data_fmt;
@@ -271,6 +282,74 @@ struct mx3fb_info {
struct fb_var_screeninfo cur_var; /* current var info */
};
+static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value);
+
+#ifdef PWM_BACKLIGHT_AVAILABLE
+static u32 sdc_get_brightness(struct mx3fb_data *mx3fb);
+
+static int mx3fb_bl_get_brightness(struct backlight_device *bl)
+{
+ struct mx3fb_data *fbd = bl_get_data(bl);
+
+ return sdc_get_brightness(fbd);
+}
+
+static int mx3fb_bl_update_status(struct backlight_device *bl)
+{
+ struct mx3fb_data *fbd = bl_get_data(bl);
+ int brightness = bl->props.brightness;
+
+ if (bl->props.power != FB_BLANK_UNBLANK)
+ brightness = 0;
+ if (bl->props.fb_blank != FB_BLANK_UNBLANK)
+ brightness = 0;
+
+ fbd->backlight_level = (fbd->backlight_level & ~0xFF) | brightness;
+
+ sdc_set_brightness(fbd, fbd->backlight_level);
+
+ return 0;
+}
+
+static const struct backlight_ops mx3fb_lcdc_bl_ops = {
+ .update_status = mx3fb_bl_update_status,
+ .get_brightness = mx3fb_bl_get_brightness,
+};
+
+static void mx3fb_init_backlight(struct mx3fb_data *fbd)
+{
+ struct backlight_properties props;
+ struct backlight_device *bl;
+
+ if (fbd->bl)
+ return;
+
+ memset(&props, 0, sizeof(struct backlight_properties));
+ props.max_brightness = 0xff;
+ props.type = BACKLIGHT_RAW;
+ sdc_set_brightness(fbd, fbd->backlight_level);
+
+ bl = backlight_device_register("mx3fb-bl", fbd->dev, fbd,
+ &mx3fb_lcdc_bl_ops, &props);
+ if (IS_ERR(bl)) {
+ dev_err(fbd->dev, "error %ld on backlight register\n",
+ PTR_ERR(bl));
+ return;
+ }
+
+ fbd->bl = bl;
+ bl->props.power = FB_BLANK_UNBLANK;
+ bl->props.fb_blank = FB_BLANK_UNBLANK;
+ bl->props.brightness = mx3fb_bl_get_brightness(bl);
+}
+
+static void mx3fb_exit_backlight(struct mx3fb_data *fbd)
+{
+ if (fbd->bl)
+ backlight_device_unregister(fbd->bl);
+}
+#endif
+
static void mx3fb_dma_done(void *);
/* Used fb-mode and bpp. Can be set on kernel command line, therefore file-static. */
@@ -628,6 +707,18 @@ static int sdc_set_global_alpha(struct mx3fb_data *mx3fb, bool enable, uint8_t a
return 0;
}
+#ifdef PWM_BACKLIGHT_AVAILABLE
+static u32 sdc_get_brightness(struct mx3fb_data *mx3fb)
+{
+ u32 brightness;
+
+ brightness = mx3fb_read_reg(mx3fb, SDC_PWM_CTRL);
+ brightness = (brightness >> 16) & 0xFF;
+
+ return brightness;
+}
+#endif
+
static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value)
{
dev_dbg(mx3fb->dev, "%s: value = %d\n", __func__, value);
@@ -1534,6 +1625,9 @@ static int mx3fb_probe(struct platform_device *pdev)
if (ret < 0)
goto eisdc0;
+#ifdef PWM_BACKLIGHT_AVAILABLE
+ mx3fb_init_backlight(mx3fb);
+#endif
return 0;
eisdc0:
@@ -1557,6 +1651,10 @@ static int mx3fb_remove(struct platform_device *dev)
chan = &mx3_fbi->idmac_channel->dma_chan;
release_fbi(fbi);
+#ifdef PWM_BACKLIGHT_AVAILABLE
+ mx3fb_exit_backlight(mx3fb);
+#endif
+
dma_release_channel(chan);
dmaengine_put();
This patch add backlight control support to allow dimming the backlight using the internal PWM. Currently the brightness is set fixed to a maximum of 255. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> --- Changes in v3: * Add a more descriptive commit message Changes in v2: * rebased to v3.15-rc4 drivers/video/fbdev/mx3fb.c | 98 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 98 insertions(+)