| Message ID | 1399004769-31033-2-git-send-email-chanho61.park@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Chanho, When testing some other patches with this series applied I found one more issue. Please see below. On 02.05.2014 06:26, Chanho Park wrote: > This patch adds a PMU(Power Management Unit) syscon node. This > should be required for USB Phy syscon regmap I/F. > > Cc: Kamil Debski <k.debski@samsung.com> > Signed-off-by: Chanho Park <chanho61.park@samsung.com> > Reviewed-by: Tomasz Figa <t.figa@samsung.com> > --- > Documentation/devicetree/bindings/arm/samsung/pmu.txt | 3 +++ > arch/arm/boot/dts/exynos4.dtsi | 5 +++++ > arch/arm/boot/dts/exynos4x12.dtsi | 4 ++++ > 3 files changed, 12 insertions(+) > > diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt > index f1f1552..b562634 100644 > --- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt > +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt > @@ -2,6 +2,9 @@ SAMSUNG Exynos SoC series PMU Registers > > Properties: > - compatible : should contain two values. First value must be one from following list: > + - "samsung,exynos4210-pmu" - for Exynos4210 SoC, > + - "samsung,exynos4212-pmu" - for Exynos4212 SoC, > + - "samsung,exynos4412-pmu" - for Exynos4412 SoC, Here two compatible strings are specified, one for each SoC in 4x12 family, but... > - "samsung,exynos5250-pmu" - for Exynos5250 SoC, > - "samsung,exynos5420-pmu" - for Exynos5420 SoC. > second value must be always "syscon". > diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi > index 2f8bcd0..264066f 100644 > --- a/arch/arm/boot/dts/exynos4.dtsi > +++ b/arch/arm/boot/dts/exynos4.dtsi > @@ -110,6 +110,11 @@ > reg = <0x10010000 0x400>; > }; > > + pmu_system_controller: system-controller@10020000 { > + compatible = "samsung,exynos4210-pmu", "syscon"; > + reg = <0x10020000 0x4000>; > + }; > + > dsi_0: dsi@11C80000 { > compatible = "samsung,exynos4210-mipi-dsi"; > reg = <0x11C80000 0x10000>; > diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi > index c4a9306..7f767f7 100644 > --- a/arch/arm/boot/dts/exynos4x12.dtsi > +++ b/arch/arm/boot/dts/exynos4x12.dtsi > @@ -119,6 +119,10 @@ > interrupts = <0 72 0>; > }; > > + pmu_system_controller: system-controller@10020000 { > + compatible = "samsung,exynos4x12-pmu", "syscon"; Here one node is added for both using an undocumented compatible string. Please fix this according to documentation. Best regards, Tomasz -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 05/16/14 02:07, Tomasz Figa wrote: > Hi Chanho, > Hi, > When testing some other patches with this series applied I found one > more issue. Please see below. > > On 02.05.2014 06:26, Chanho Park wrote: >> This patch adds a PMU(Power Management Unit) syscon node. This >> should be required for USB Phy syscon regmap I/F. >> >> Cc: Kamil Debski<k.debski@samsung.com> >> Signed-off-by: Chanho Park<chanho61.park@samsung.com> >> Reviewed-by: Tomasz Figa<t.figa@samsung.com> >> --- >> Documentation/devicetree/bindings/arm/samsung/pmu.txt | 3 +++ >> arch/arm/boot/dts/exynos4.dtsi | 5 +++++ >> arch/arm/boot/dts/exynos4x12.dtsi | 4 ++++ >> 3 files changed, 12 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt >> index f1f1552..b562634 100644 >> --- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt >> +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt >> @@ -2,6 +2,9 @@ SAMSUNG Exynos SoC series PMU Registers >> >> Properties: >> - compatible : should contain two values. First value must be one from following list: >> + - "samsung,exynos4210-pmu" - for Exynos4210 SoC, >> + - "samsung,exynos4212-pmu" - for Exynos4212 SoC, >> + - "samsung,exynos4412-pmu" - for Exynos4412 SoC, > > Here two compatible strings are specified, one for each SoC in 4x12 > family, but... > >> - "samsung,exynos5250-pmu" - for Exynos5250 SoC, >> - "samsung,exynos5420-pmu" - for Exynos5420 SoC. >> second value must be always "syscon". >> diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi >> index 2f8bcd0..264066f 100644 >> --- a/arch/arm/boot/dts/exynos4.dtsi >> +++ b/arch/arm/boot/dts/exynos4.dtsi >> @@ -110,6 +110,11 @@ >> reg =<0x10010000 0x400>; >> }; >> >> + pmu_system_controller: system-controller@10020000 { >> + compatible = "samsung,exynos4210-pmu", "syscon"; >> + reg =<0x10020000 0x4000>; >> + }; >> + >> dsi_0: dsi@11C80000 { >> compatible = "samsung,exynos4210-mipi-dsi"; >> reg =<0x11C80000 0x10000>; >> diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi >> index c4a9306..7f767f7 100644 >> --- a/arch/arm/boot/dts/exynos4x12.dtsi >> +++ b/arch/arm/boot/dts/exynos4x12.dtsi >> @@ -119,6 +119,10 @@ >> interrupts =<0 72 0>; >> }; >> >> + pmu_system_controller: system-controller@10020000 { >> + compatible = "samsung,exynos4x12-pmu", "syscon"; > > Here one node is added for both using an undocumented compatible string. > Please fix this according to documentation. > Chanho, updated patch? - Kukjin -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Tomasz, > -----Original Message----- > From: Tomasz Figa [mailto:t.figa@samsung.com] > Sent: Friday, May 16, 2014 2:07 AM > To: Chanho Park; kgene.kim@samsung.com; linux-samsung- > soc@vger.kernel.org > Cc: devicetree@vger.kernel.org; k.debski@samsung.com > Subject: Re: [PATCHv4 1/4] ARM: dts: exynos4: add PMU syscon node > > Hi Chanho, > > When testing some other patches with this series applied I found one > more issue. Please see below. > > On 02.05.2014 06:26, Chanho Park wrote: > > This patch adds a PMU(Power Management Unit) syscon node. This > > should be required for USB Phy syscon regmap I/F. > > > > Cc: Kamil Debski <k.debski@samsung.com> > > Signed-off-by: Chanho Park <chanho61.park@samsung.com> > > Reviewed-by: Tomasz Figa <t.figa@samsung.com> > > --- > > Documentation/devicetree/bindings/arm/samsung/pmu.txt | 3 +++ > > arch/arm/boot/dts/exynos4.dtsi | 5 +++++ > > arch/arm/boot/dts/exynos4x12.dtsi | 4 ++++ > > 3 files changed, 12 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt > b/Documentation/devicetree/bindings/arm/samsung/pmu.txt > > index f1f1552..b562634 100644 > > --- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt > > +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt > > @@ -2,6 +2,9 @@ SAMSUNG Exynos SoC series PMU Registers > > > > Properties: > > - compatible : should contain two values. First value must be one > from following list: > > + - "samsung,exynos4210-pmu" - for Exynos4210 SoC, > > + - "samsung,exynos4212-pmu" - for Exynos4212 SoC, > > + - "samsung,exynos4412-pmu" - for Exynos4412 SoC, > > Here two compatible strings are specified, one for each SoC in 4x12 > family, but... > > > - "samsung,exynos5250-pmu" - for Exynos5250 SoC, > > - "samsung,exynos5420-pmu" - for Exynos5420 SoC. > > second value must be always "syscon". > > diff --git a/arch/arm/boot/dts/exynos4.dtsi > b/arch/arm/boot/dts/exynos4.dtsi > > index 2f8bcd0..264066f 100644 > > --- a/arch/arm/boot/dts/exynos4.dtsi > > +++ b/arch/arm/boot/dts/exynos4.dtsi > > @@ -110,6 +110,11 @@ > > reg = <0x10010000 0x400>; > > }; > > > > + pmu_system_controller: system-controller@10020000 { > > + compatible = "samsung,exynos4210-pmu", "syscon"; > > + reg = <0x10020000 0x4000>; > > + }; > > + > > dsi_0: dsi@11C80000 { > > compatible = "samsung,exynos4210-mipi-dsi"; > > reg = <0x11C80000 0x10000>; > > diff --git a/arch/arm/boot/dts/exynos4x12.dtsi > b/arch/arm/boot/dts/exynos4x12.dtsi > > index c4a9306..7f767f7 100644 > > --- a/arch/arm/boot/dts/exynos4x12.dtsi > > +++ b/arch/arm/boot/dts/exynos4x12.dtsi > > @@ -119,6 +119,10 @@ > > interrupts = <0 72 0>; > > }; > > > > + pmu_system_controller: system-controller@10020000 { > > + compatible = "samsung,exynos4x12-pmu", "syscon"; > > Here one node is added for both using an undocumented compatible string. > Please fix this according to documentation. OK. I forgot to change it. I'll update it. Thanks. Best Regards, Chanho Park -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Kukjin, > -----Original Message----- > From: Kukjin Kim [mailto:kgene.kim@gmail.com] On Behalf Of Kukjin Kim > Sent: Tuesday, May 20, 2014 1:23 AM > To: Tomasz Figa > Cc: Chanho Park; kgene.kim@samsung.com; linux-samsung- > soc@vger.kernel.org; devicetree@vger.kernel.org; k.debski@samsung.com > Subject: Re: [PATCHv4 1/4] ARM: dts: exynos4: add PMU syscon node > > On 05/16/14 02:07, Tomasz Figa wrote: > > Hi Chanho, > > > Hi, > > > When testing some other patches with this series applied I found one > > more issue. Please see below. > > > > On 02.05.2014 06:26, Chanho Park wrote: > >> This patch adds a PMU(Power Management Unit) syscon node. This > >> should be required for USB Phy syscon regmap I/F. > >> > >> Cc: Kamil Debski<k.debski@samsung.com> > >> Signed-off-by: Chanho Park<chanho61.park@samsung.com> > >> Reviewed-by: Tomasz Figa<t.figa@samsung.com> > >> --- > >> Documentation/devicetree/bindings/arm/samsung/pmu.txt | 3 +++ > >> arch/arm/boot/dts/exynos4.dtsi | 5 +++++ > >> arch/arm/boot/dts/exynos4x12.dtsi | 4 ++++ > >> 3 files changed, 12 insertions(+) > >> > >> diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt > b/Documentation/devicetree/bindings/arm/samsung/pmu.txt > >> index f1f1552..b562634 100644 > >> --- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt > >> +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt > >> @@ -2,6 +2,9 @@ SAMSUNG Exynos SoC series PMU Registers > >> > >> Properties: > >> - compatible : should contain two values. First value must be one > from following list: > >> + - "samsung,exynos4210-pmu" - for Exynos4210 SoC, > >> + - "samsung,exynos4212-pmu" - for Exynos4212 SoC, > >> + - "samsung,exynos4412-pmu" - for Exynos4412 SoC, > > > > Here two compatible strings are specified, one for each SoC in 4x12 > > family, but... > > > >> - "samsung,exynos5250-pmu" - for Exynos5250 SoC, > >> - "samsung,exynos5420-pmu" - for Exynos5420 SoC. > >> second value must be always "syscon". > >> diff --git a/arch/arm/boot/dts/exynos4.dtsi > b/arch/arm/boot/dts/exynos4.dtsi > >> index 2f8bcd0..264066f 100644 > >> --- a/arch/arm/boot/dts/exynos4.dtsi > >> +++ b/arch/arm/boot/dts/exynos4.dtsi > >> @@ -110,6 +110,11 @@ > >> reg =<0x10010000 0x400>; > >> }; > >> > >> + pmu_system_controller: system-controller@10020000 { > >> + compatible = "samsung,exynos4210-pmu", "syscon"; > >> + reg =<0x10020000 0x4000>; > >> + }; > >> + > >> dsi_0: dsi@11C80000 { > >> compatible = "samsung,exynos4210-mipi-dsi"; > >> reg =<0x11C80000 0x10000>; > >> diff --git a/arch/arm/boot/dts/exynos4x12.dtsi > b/arch/arm/boot/dts/exynos4x12.dtsi > >> index c4a9306..7f767f7 100644 > >> --- a/arch/arm/boot/dts/exynos4x12.dtsi > >> +++ b/arch/arm/boot/dts/exynos4x12.dtsi > >> @@ -119,6 +119,10 @@ > >> interrupts =<0 72 0>; > >> }; > >> > >> + pmu_system_controller: system-controller@10020000 { > >> + compatible = "samsung,exynos4x12-pmu", "syscon"; > > > > Here one node is added for both using an undocumented compatible > string. > > Please fix this according to documentation. > > > > Chanho, updated patch? I'll re-send the patchset soon. Thanks. Best Regards, Chanho Park -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt index f1f1552..b562634 100644 --- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt @@ -2,6 +2,9 @@ SAMSUNG Exynos SoC series PMU Registers Properties: - compatible : should contain two values. First value must be one from following list: + - "samsung,exynos4210-pmu" - for Exynos4210 SoC, + - "samsung,exynos4212-pmu" - for Exynos4212 SoC, + - "samsung,exynos4412-pmu" - for Exynos4412 SoC, - "samsung,exynos5250-pmu" - for Exynos5250 SoC, - "samsung,exynos5420-pmu" - for Exynos5420 SoC. second value must be always "syscon". diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 2f8bcd0..264066f 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -110,6 +110,11 @@ reg = <0x10010000 0x400>; }; + pmu_system_controller: system-controller@10020000 { + compatible = "samsung,exynos4210-pmu", "syscon"; + reg = <0x10020000 0x4000>; + }; + dsi_0: dsi@11C80000 { compatible = "samsung,exynos4210-mipi-dsi"; reg = <0x11C80000 0x10000>; diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index c4a9306..7f767f7 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -119,6 +119,10 @@ interrupts = <0 72 0>; }; + pmu_system_controller: system-controller@10020000 { + compatible = "samsung,exynos4x12-pmu", "syscon"; + }; + g2d@10800000 { compatible = "samsung,exynos4212-g2d"; reg = <0x10800000 0x1000>;