diff mbox

[v1,1/4] ARM: dts: qcom: Add APQ8084 SoC support

Message ID 1400684225-21381-2-git-send-email-gdjakov@mm-sol.com (mailing list archive)
State New, archived
Headers show

Commit Message

Georgi Djakov May 21, 2014, 2:57 p.m. UTC 
Add support for the Qualcomm Snapdragon 805 APQ8084 SoC. It is
used on APQ8084-MTP and other boards.

Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
---
 arch/arm/boot/dts/qcom-apq8084.dtsi |  180 +++++++++++++++++++++++++++++++++++
 1 file changed, 180 insertions(+)
 create mode 100644 arch/arm/boot/dts/qcom-apq8084.dtsi

Comments

Stephen Boyd May 21, 2014, 5:24 p.m. UTC | #1 
On 05/21/14 07:57, Georgi Djakov wrote:
> +
> +		L2: l2-cache {
> +			compatible = "qcom,arch-cache";
> +			cache-level = <2>;
> +			interrupts = <0 2 0x4>;

Let's leave out interrupts until the binding is accepted.

> +			qcom,saw = <&saw_l2>;
> +		};
> +	};
> +
> +	cpu-pmu {
> +		compatible = "qcom,krait-pmu";
> +		interrupts = <1 7 0xf04>;
> +	};
> +
> +	soc: soc {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +		compatible = "simple-bus";
> +
> +		intc: interrupt-controller@f9000000 {
> +			compatible = "qcom,msm-qgic2";
> +			interrupt-controller;
> +			#interrupt-cells = <3>;
> +			reg = <0xf9000000 0x1000>,
> +			      <0xf9002000 0x1000>;
> +		};
> +
> +		timer {
> +			compatible = "arm,armv7-timer";
> +			interrupts = <1 2 0xf08>,
> +				     <1 3 0xf08>,
> +				     <1 4 0xf08>,
> +				     <1 1 0xf08>;
> +			clock-frequency = <19200000>;
> +		};

Please move this timer node out of the soc container below the pmu.
Georgi Djakov May 21, 2014, 8:16 p.m. UTC | #2 
On 21.05.14, 20:24, Stephen Boyd wrote:
> On 05/21/14 07:57, Georgi Djakov wrote:
>> +
>> +		L2: l2-cache {
>> +			compatible = "qcom,arch-cache";
>> +			cache-level = <2>;
>> +			interrupts = <0 2 0x4>;
> 
> Let's leave out interrupts until the binding is accepted.
> 
>> +			qcom,saw = <&saw_l2>;
>> +		};
>> +	};
>> +
>> +	cpu-pmu {
>> +		compatible = "qcom,krait-pmu";
>> +		interrupts = <1 7 0xf04>;
>> +	};
>> +
>> +	soc: soc {
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +		ranges;
>> +		compatible = "simple-bus";
>> +
>> +		intc: interrupt-controller@f9000000 {
>> +			compatible = "qcom,msm-qgic2";
>> +			interrupt-controller;
>> +			#interrupt-cells = <3>;
>> +			reg = <0xf9000000 0x1000>,
>> +			      <0xf9002000 0x1000>;
>> +		};
>> +
>> +		timer {
>> +			compatible = "arm,armv7-timer";
>> +			interrupts = <1 2 0xf08>,
>> +				     <1 3 0xf08>,
>> +				     <1 4 0xf08>,
>> +				     <1 1 0xf08>;
>> +			clock-frequency = <19200000>;
>> +		};
> 
> Please move this timer node out of the soc container below the pmu.
> 

Will do. Thanks for the comments!

BR,
Georgi
diff mbox

Patch

diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
new file mode 100644
index 0000000..a771b3b
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -0,0 +1,180 @@ 
+/dts-v1/;
+
+#include "skeleton.dtsi"
+
+/ {
+	model = "Qualcomm APQ 8084";
+	compatible = "qcom,apq8084";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,krait";
+			reg = <0>;
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "qcom,krait";
+			reg = <1>;
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "qcom,krait";
+			reg = <2>;
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc2>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "qcom,krait";
+			reg = <3>;
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc3>;
+		};
+
+		L2: l2-cache {
+			compatible = "qcom,arch-cache";
+			cache-level = <2>;
+			interrupts = <0 2 0x4>;
+			qcom,saw = <&saw_l2>;
+		};
+	};
+
+	cpu-pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <1 7 0xf04>;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@f9000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0xf9000000 0x1000>,
+			      <0xf9002000 0x1000>;
+		};
+
+		timer {
+			compatible = "arm,armv7-timer";
+			interrupts = <1 2 0xf08>,
+				     <1 3 0xf08>,
+				     <1 4 0xf08>,
+				     <1 1 0xf08>;
+			clock-frequency = <19200000>;
+		};
+
+		timer@f9020000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0xf9020000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@f9021000 {
+				frame-number = <0>;
+				interrupts = <0 8 0x4>,
+					     <0 7 0x4>;
+				reg = <0xf9021000 0x1000>,
+				      <0xf9022000 0x1000>;
+			};
+
+			frame@f9023000 {
+				frame-number = <1>;
+				interrupts = <0 9 0x4>;
+				reg = <0xf9023000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9024000 {
+				frame-number = <2>;
+				interrupts = <0 10 0x4>;
+				reg = <0xf9024000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9025000 {
+				frame-number = <3>;
+				interrupts = <0 11 0x4>;
+				reg = <0xf9025000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9026000 {
+				frame-number = <4>;
+				interrupts = <0 12 0x4>;
+				reg = <0xf9026000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9027000 {
+				frame-number = <5>;
+				interrupts = <0 13 0x4>;
+				reg = <0xf9027000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9028000 {
+				frame-number = <6>;
+				interrupts = <0 14 0x4>;
+				reg = <0xf9028000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		saw_l2: regulator@f9012000 {
+			compatible = "qcom,saw2";
+			reg = <0xf9012000 0x1000>;
+			regulator;
+		};
+
+		acc0: clock-controller@f9088000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9088000 0x1000>,
+			      <0xf9008000 0x1000>;
+		};
+
+		acc1: clock-controller@f9098000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9098000 0x1000>,
+			      <0xf9008000 0x1000>;
+		};
+
+		acc2: clock-controller@f90a8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90a8000 0x1000>,
+			      <0xf9008000 0x1000>;
+		};
+
+		acc3: clock-controller@f90b8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90b8000 0x1000>,
+			      <0xf9008000 0x1000>;
+		};
+
+		restart@fc4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0xfc4ab000 0x4>;
+		};
+	};
+};