diff mbox

[v1,5/5] ARM: dts: qcom: Add APQ8084 serial port DT node

Message ID 1400775885-10296-6-git-send-email-gdjakov@mm-sol.com (mailing list archive)
State New, archived
Headers show

Commit Message

Georgi Djakov May 22, 2014, 4:24 p.m. UTC 
Add the necessary DT node to probe the serial driver on
APQ8084 platforms.

Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
---
 arch/arm/boot/dts/qcom-apq8084.dtsi |    7 +++++++
 1 file changed, 7 insertions(+)

Comments

Kumar Gala May 22, 2014, 4:32 p.m. UTC | #1 
On May 22, 2014, at 11:24 AM, Georgi Djakov <gdjakov@mm-sol.com> wrote:

> Add the necessary DT node to probe the serial driver on
> APQ8084 platforms.
> 
> Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
> ---
> arch/arm/boot/dts/qcom-apq8084.dtsi |    7 +++++++
> 1 file changed, 7 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
> index 2dcd11e..c346549 100644
> --- a/arch/arm/boot/dts/qcom-apq8084.dtsi
> +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
> @@ -185,5 +185,12 @@
> 			reg = <0xfc400000 0x4000>;
> 		};
> 
> +		serial@f995e000 {

Mark it disabled in the soc.dtsi and “ok” in the board.

> +			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> +			reg = <0xf995e000 0x1000>;
> +			interrupts = <0 114 0x0>;
> +			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
> +			clock-names = "core", "iface";
> +		};
> 	};
> };
> -- 
> 1.7.9.5
>
Georgi Djakov May 23, 2014, 2:17 p.m. UTC | #2 
On 05/22/2014 07:32 PM, Kumar Gala wrote:
>
> On May 22, 2014, at 11:24 AM, Georgi Djakov <gdjakov@mm-sol.com> wrote:
>
>> Add the necessary DT node to probe the serial driver on
>> APQ8084 platforms.
>>
>> Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
>> ---
>> arch/arm/boot/dts/qcom-apq8084.dtsi |    7 +++++++
>> 1 file changed, 7 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
>> index 2dcd11e..c346549 100644
>> --- a/arch/arm/boot/dts/qcom-apq8084.dtsi
>> +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
>> @@ -185,5 +185,12 @@
>> 			reg = <0xfc400000 0x4000>;
>> 		};
>>
>> +		serial@f995e000 {
>
> Mark it disabled in the soc.dtsi and “ok” in the board.
>

Oh, of course!

Thanks,
Georgi
diff mbox

Patch

diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index 2dcd11e..c346549 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -185,5 +185,12 @@ 
 			reg = <0xfc400000 0x4000>;
 		};
 
+		serial@f995e000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf995e000 0x1000>;
+			interrupts = <0 114 0x0>;
+			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+		};
 	};
 };