@@ -41,6 +41,18 @@ Required properties:
BG2/BG2CD: chip control register set
BG2Q: chip control register set and cpu pll registers
+* Marvell Berlin2 system control binding
+
+Marvell Berlin SoCs have a system control register set providing several
+individual registers dealing with pinmux, padmux, and reset.
+
+Required properties:
+- compatible: should be one of
+ "marvell,berlin2-system-ctrl" for BG2
+ "marvell,berlin2cd-system-ctrl" for BG2CD
+ "marvell,berlin2q-system-ctrl" for BG2Q
+- reg: address and length of the system control register set
+
* Clock provider binding
As clock related registers are spread among the chip control registers, the
@@ -61,6 +73,23 @@ Clocks provided by core clocks shall be referenced by a clock specifier
indexing one of the provided clocks. Refer to dt-bindings/clock/berlin<soc>.h
for the corresponding index mapping.
+* Pin controller binding
+
+Pin control registers are part of both register sets, chip control and system
+control. The pins controlled are organized in groups, so no actual pin
+information is needed.
+
+A pin-controller node should contain subnodes representing the pin group
+configurations, one per function. Each subnode has the group name and the muxing
+function used.
+
+Be aware the Marvell Berlin datasheets use the keyword 'mode' for what is called
+a 'function' in the pin-controller subsystem.
+
+Required subnode-properties:
+- groups: a list of strings describing the group names.
+- function: a string describing the function used to mux the groups.
+
Example:
chip: chip-control@ea0000 {
@@ -69,4 +98,29 @@ chip: chip-control@ea0000 {
reg = <0xea0000 0x400>;
clocks = <&refclk>, <&externaldev 0>;
clock-names = "refclk", "video_ext0";
+
+ spi1_pmux: spi1-pmux {
+ groups = "G0";
+ function = "spi1";
+ };
+};
+
+sysctrl: system-controller@d000 {
+ compatible = "marvell,berlin2-system-ctrl";
+ reg = <0xd000 0x100>;
+
+ uart0_pmux: uart0-pmux {
+ groups = "GSM4";
+ function = "uart0";
+ };
+
+ uart1_pmux: uart1-pmux {
+ groups = "GSM5";
+ function = "uart1";
+ };
+
+ uart2_pmux: uart2-pmux {
+ groups = "GSM3";
+ function = "uart2";
+ };
};