| Message ID | 1401351334-11210-7-git-send-email-amit.daniel@samsung.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Delegated to: | Zhang Rui |
| Headers | show |
Hi Amit, On Thu, May 29, 2014 at 09:15:34AM +0100, Amit Daniel Kachhap wrote: > This patch upgrades the ACPI cpufreq cooling portions to use the generic > cpufreq cooling infrastructure. There should not be any functionality > related changes as the same behaviour is provided by the generic > cpufreq APIs with the notifier mechanism. > > Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> > --- > drivers/acpi/processor_driver.c | 6 +- > drivers/acpi/processor_thermal.c | 235 ++++++++++++++++++-------------------- > include/acpi/processor.h | 3 +- > 3 files changed, 115 insertions(+), 129 deletions(-) > > diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c > index 7f70f31..10aba4a 100644 > --- a/drivers/acpi/processor_driver.c > +++ b/drivers/acpi/processor_driver.c > @@ -36,6 +36,7 @@ > #include <linux/cpuidle.h> > #include <linux/slab.h> > #include <linux/acpi.h> > +#include <linux/cpu_cooling.h> > > #include <acpi/processor.h> > > @@ -178,8 +179,7 @@ static int __acpi_processor_start(struct acpi_device *device) > if (!cpuidle_get_driver() || cpuidle_get_driver() == &acpi_idle_driver) > acpi_processor_power_init(pr); > > - pr->cdev = thermal_cooling_device_register("Processor", device, > - &processor_cooling_ops); > + pr->cdev = acpi_processor_cooling_register(device); With this you have removed the only cooling device whose type was "Processor". There's special code for dealing with this cooling device in drivers/thermal/thermal_core.c:passive_store(): list_for_each_entry(cdev, &thermal_cdev_list, node) { if (!strncmp("Processor", cdev->type, sizeof("Processor"))) thermal_zone_bind_cooling_device(tz, THERMAL_TRIPS_NONE, cdev, THERMAL_NO_LIMIT, THERMAL_NO_LIMIT); } mutex_unlock(&thermal_list_lock); if (!tz->passive_delay) With your change, that code is now "dead" as it can't do anything. No I don't know what should you do with it, either remove it or make it match the cpufreq cooling device. But this patch should deal with that code as well. Cheers, Javi -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Javi, On 5/29/14, Javi Merino <javi.merino@arm.com> wrote: > Hi Amit, > > On Thu, May 29, 2014 at 09:15:34AM +0100, Amit Daniel Kachhap wrote: >> This patch upgrades the ACPI cpufreq cooling portions to use the generic >> cpufreq cooling infrastructure. There should not be any functionality >> related changes as the same behaviour is provided by the generic >> cpufreq APIs with the notifier mechanism. >> >> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> >> --- >> drivers/acpi/processor_driver.c | 6 +- >> drivers/acpi/processor_thermal.c | 235 >> ++++++++++++++++++-------------------- >> include/acpi/processor.h | 3 +- >> 3 files changed, 115 insertions(+), 129 deletions(-) >> >> diff --git a/drivers/acpi/processor_driver.c >> b/drivers/acpi/processor_driver.c >> index 7f70f31..10aba4a 100644 >> --- a/drivers/acpi/processor_driver.c >> +++ b/drivers/acpi/processor_driver.c >> @@ -36,6 +36,7 @@ >> #include <linux/cpuidle.h> >> #include <linux/slab.h> >> #include <linux/acpi.h> >> +#include <linux/cpu_cooling.h> >> >> #include <acpi/processor.h> >> >> @@ -178,8 +179,7 @@ static int __acpi_processor_start(struct acpi_device >> *device) >> if (!cpuidle_get_driver() || cpuidle_get_driver() == >> &acpi_idle_driver) >> acpi_processor_power_init(pr); >> >> - pr->cdev = thermal_cooling_device_register("Processor", device, >> - >> &processor_cooling_ops); >> + pr->cdev = acpi_processor_cooling_register(device); > > With this you have removed the only cooling device whose type was > "Processor". There's special code for dealing with this cooling > device in drivers/thermal/thermal_core.c:passive_store(): > > list_for_each_entry(cdev, &thermal_cdev_list, node) { > if (!strncmp("Processor", cdev->type, > sizeof("Processor"))) > thermal_zone_bind_cooling_device(tz, > THERMAL_TRIPS_NONE, cdev, > THERMAL_NO_LIMIT, > THERMAL_NO_LIMIT); > } > mutex_unlock(&thermal_list_lock); > if (!tz->passive_delay) > > With your change, that code is now "dead" as it can't do anything. No > I don't know what should you do with it, either remove it or make it > match the cpufreq cooling device. But this patch should deal with > that code as well. nice catch. I somehow missed modifying this section. I think the following changes should fix this, - if (!strncmp("Processor", cdev->type, - sizeof("Processor"))) + if (!strncmp("thermal-cpufreq", cdev->type, + sizeof("thermal-cpufreq"))) thermal_zone_bind_cooling_device(tz, > > Cheers, > Javi > > > -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jun 02, 2014 at 10:21:48AM +0100, Amit Kachhap wrote: > Hi Javi, > > On 5/29/14, Javi Merino <javi.merino@arm.com> wrote: > > Hi Amit, > > > > On Thu, May 29, 2014 at 09:15:34AM +0100, Amit Daniel Kachhap wrote: > >> This patch upgrades the ACPI cpufreq cooling portions to use the generic > >> cpufreq cooling infrastructure. There should not be any functionality > >> related changes as the same behaviour is provided by the generic > >> cpufreq APIs with the notifier mechanism. > >> > >> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> > >> --- > >> drivers/acpi/processor_driver.c | 6 +- > >> drivers/acpi/processor_thermal.c | 235 > >> ++++++++++++++++++-------------------- > >> include/acpi/processor.h | 3 +- > >> 3 files changed, 115 insertions(+), 129 deletions(-) > >> > >> diff --git a/drivers/acpi/processor_driver.c > >> b/drivers/acpi/processor_driver.c > >> index 7f70f31..10aba4a 100644 > >> --- a/drivers/acpi/processor_driver.c > >> +++ b/drivers/acpi/processor_driver.c > >> @@ -36,6 +36,7 @@ > >> #include <linux/cpuidle.h> > >> #include <linux/slab.h> > >> #include <linux/acpi.h> > >> +#include <linux/cpu_cooling.h> > >> > >> #include <acpi/processor.h> > >> > >> @@ -178,8 +179,7 @@ static int __acpi_processor_start(struct acpi_device > >> *device) > >> if (!cpuidle_get_driver() || cpuidle_get_driver() == > >> &acpi_idle_driver) > >> acpi_processor_power_init(pr); > >> > >> - pr->cdev = thermal_cooling_device_register("Processor", device, > >> - > >> &processor_cooling_ops); > >> + pr->cdev = acpi_processor_cooling_register(device); > > > > With this you have removed the only cooling device whose type was > > "Processor". There's special code for dealing with this cooling > > device in drivers/thermal/thermal_core.c:passive_store(): > > > > list_for_each_entry(cdev, &thermal_cdev_list, node) { > > if (!strncmp("Processor", cdev->type, > > sizeof("Processor"))) > > thermal_zone_bind_cooling_device(tz, > > THERMAL_TRIPS_NONE, cdev, > > THERMAL_NO_LIMIT, > > THERMAL_NO_LIMIT); > > } > > mutex_unlock(&thermal_list_lock); > > if (!tz->passive_delay) > > > > With your change, that code is now "dead" as it can't do anything. No > > I don't know what should you do with it, either remove it or make it > > match the cpufreq cooling device. But this patch should deal with > > that code as well. > nice catch. I somehow missed modifying this section. > I think the following changes should fix this, > - if (!strncmp("Processor", cdev->type, > - sizeof("Processor"))) > + if (!strncmp("thermal-cpufreq", cdev->type, > + sizeof("thermal-cpufreq"))) > thermal_zone_bind_cooling_device(tz, > That should do it. I don't really understand why this code is specifically looking for ACPI processor cooling devices but I guess that's the least disrupting change you can make. Cheers, Javi -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello Amit, Javi, On Mon, Jun 02, 2014 at 11:20:48AM +0100, Javi Merino wrote: > On Mon, Jun 02, 2014 at 10:21:48AM +0100, Amit Kachhap wrote: > > Hi Javi, > > > > On 5/29/14, Javi Merino <javi.merino@arm.com> wrote: > > > Hi Amit, > > > > > > On Thu, May 29, 2014 at 09:15:34AM +0100, Amit Daniel Kachhap wrote: > > >> This patch upgrades the ACPI cpufreq cooling portions to use the generic > > >> cpufreq cooling infrastructure. There should not be any functionality > > >> related changes as the same behaviour is provided by the generic > > >> cpufreq APIs with the notifier mechanism. > > >> > > >> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> > > >> --- > > >> drivers/acpi/processor_driver.c | 6 +- > > >> drivers/acpi/processor_thermal.c | 235 > > >> ++++++++++++++++++-------------------- > > >> include/acpi/processor.h | 3 +- > > >> 3 files changed, 115 insertions(+), 129 deletions(-) > > >> > > >> diff --git a/drivers/acpi/processor_driver.c > > >> b/drivers/acpi/processor_driver.c > > >> index 7f70f31..10aba4a 100644 > > >> --- a/drivers/acpi/processor_driver.c > > >> +++ b/drivers/acpi/processor_driver.c > > >> @@ -36,6 +36,7 @@ > > >> #include <linux/cpuidle.h> > > >> #include <linux/slab.h> > > >> #include <linux/acpi.h> > > >> +#include <linux/cpu_cooling.h> > > >> > > >> #include <acpi/processor.h> > > >> > > >> @@ -178,8 +179,7 @@ static int __acpi_processor_start(struct acpi_device > > >> *device) > > >> if (!cpuidle_get_driver() || cpuidle_get_driver() == > > >> &acpi_idle_driver) > > >> acpi_processor_power_init(pr); > > >> > > >> - pr->cdev = thermal_cooling_device_register("Processor", device, > > >> - > > >> &processor_cooling_ops); > > >> + pr->cdev = acpi_processor_cooling_register(device); > > > > > > With this you have removed the only cooling device whose type was > > > "Processor". There's special code for dealing with this cooling > > > device in drivers/thermal/thermal_core.c:passive_store(): > > > > > > list_for_each_entry(cdev, &thermal_cdev_list, node) { > > > if (!strncmp("Processor", cdev->type, > > > sizeof("Processor"))) > > > thermal_zone_bind_cooling_device(tz, > > > THERMAL_TRIPS_NONE, cdev, > > > THERMAL_NO_LIMIT, > > > THERMAL_NO_LIMIT); > > > } > > > mutex_unlock(&thermal_list_lock); > > > if (!tz->passive_delay) > > > > > > With your change, that code is now "dead" as it can't do anything. No > > > I don't know what should you do with it, either remove it or make it > > > match the cpufreq cooling device. But this patch should deal with > > > that code as well. > > nice catch. I somehow missed modifying this section. > > I think the following changes should fix this, > > - if (!strncmp("Processor", cdev->type, > > - sizeof("Processor"))) > > + if (!strncmp("thermal-cpufreq", cdev->type, > > + sizeof("thermal-cpufreq"))) > > thermal_zone_bind_cooling_device(tz, > > > > That should do it. I don't really understand why this code is > specifically looking for ACPI processor cooling devices but I guess > that's the least disrupting change you can make. Well, I suggest we move slightly carefuly here. The problem is that this change actually breaks ABI. If so, we need to follow the kernel ABI change rules. We should never break userspace. Rui, Do you recall what users are aware of this sysfs entry? Cheers, > > Cheers, > Javi > -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index 7f70f31..10aba4a 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -36,6 +36,7 @@ #include <linux/cpuidle.h> #include <linux/slab.h> #include <linux/acpi.h> +#include <linux/cpu_cooling.h> #include <acpi/processor.h> @@ -178,8 +179,7 @@ static int __acpi_processor_start(struct acpi_device *device) if (!cpuidle_get_driver() || cpuidle_get_driver() == &acpi_idle_driver) acpi_processor_power_init(pr); - pr->cdev = thermal_cooling_device_register("Processor", device, - &processor_cooling_ops); + pr->cdev = acpi_processor_cooling_register(device); if (IS_ERR(pr->cdev)) { result = PTR_ERR(pr->cdev); goto err_power_exit; @@ -250,7 +250,7 @@ static int acpi_processor_stop(struct device *dev) if (pr->cdev) { sysfs_remove_link(&device->dev.kobj, "thermal_cooling"); sysfs_remove_link(&pr->cdev->device.kobj, "device"); - thermal_cooling_device_unregister(pr->cdev); + cpufreq_cooling_unregister(pr->cdev); pr->cdev = NULL; } return 0; diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c index e003663..9fc4a58 100644 --- a/drivers/acpi/processor_thermal.c +++ b/drivers/acpi/processor_thermal.c @@ -31,6 +31,7 @@ #include <linux/init.h> #include <linux/cpufreq.h> #include <linux/acpi.h> +#include <linux/cpu_cooling.h> #include <acpi/processor.h> #include <asm/uaccess.h> @@ -53,27 +54,13 @@ ACPI_MODULE_NAME("processor_thermal"); static DEFINE_PER_CPU(unsigned int, cpufreq_thermal_reduction_pctg); static unsigned int acpi_thermal_cpufreq_is_init = 0; +static struct notifier_block cpufreq_cooling_notifier_block; +static int phys_package_first_cpu(int cpu); #define reduction_pctg(cpu) \ per_cpu(cpufreq_thermal_reduction_pctg, phys_package_first_cpu(cpu)) -/* - * Emulate "per package data" using per cpu data (which should really be - * provided elsewhere) - * - * Note we can lose a CPU on cpu hotunplug, in this case we forget the state - * temporarily. Fortunately that's not a big issue here (I hope) - */ -static int phys_package_first_cpu(int cpu) -{ - int i; - int id = topology_physical_package_id(cpu); - - for_each_online_cpu(i) - if (topology_physical_package_id(i) == id) - return i; - return 0; -} +static DEFINE_PER_CPU(struct acpi_device *, acpi_dev); static int cpu_has_cpufreq(unsigned int cpu) { @@ -83,30 +70,6 @@ static int cpu_has_cpufreq(unsigned int cpu) return 1; } -static int acpi_thermal_cpufreq_notifier(struct notifier_block *nb, - unsigned long event, void *data) -{ - struct cpufreq_policy *policy = data; - unsigned long max_freq = 0; - - if (event != CPUFREQ_ADJUST) - goto out; - - max_freq = ( - policy->cpuinfo.max_freq * - (100 - reduction_pctg(policy->cpu) * 20) - ) / 100; - - cpufreq_verify_within_limits(policy, 0, max_freq); - - out: - return 0; -} - -static struct notifier_block acpi_thermal_cpufreq_notifier_block = { - .notifier_call = acpi_thermal_cpufreq_notifier, -}; - static int cpufreq_get_max_state(unsigned int cpu) { if (!cpu_has_cpufreq(cpu)) @@ -123,34 +86,31 @@ static int cpufreq_get_cur_state(unsigned int cpu) return reduction_pctg(cpu); } -static int cpufreq_set_cur_state(unsigned int cpu, int state) +static int acpi_processor_freq_level(unsigned int cpu, int state) { - int i; + struct cpufreq_policy policy; + unsigned long max_freq = 0; + int level = 0; - if (!cpu_has_cpufreq(cpu)) + if (!acpi_thermal_cpufreq_is_init || cpufreq_get_policy(&policy, cpu)) return 0; reduction_pctg(cpu) = state; + max_freq = ( + policy.cpuinfo.max_freq * + (100 - reduction_pctg(cpu) * 20) + ) / 100; - /* - * Update all the CPUs in the same package because they all - * contribute to the temperature and often share the same - * frequency. - */ - for_each_online_cpu(i) { - if (topology_physical_package_id(i) == - topology_physical_package_id(cpu)) - cpufreq_update_policy(i); - } - return 0; + level = cpufreq_cooling_get_level(phys_package_first_cpu(cpu), + max_freq, GET_LEVEL_FLOOR); + return level; } void acpi_thermal_cpufreq_init(void) { int i; - i = cpufreq_register_notifier(&acpi_thermal_cpufreq_notifier_block, - CPUFREQ_POLICY_NOTIFIER); + i = thermal_cooling_register_notifier(&cpufreq_cooling_notifier_block); if (!i) acpi_thermal_cpufreq_is_init = 1; } @@ -158,31 +118,30 @@ void acpi_thermal_cpufreq_init(void) void acpi_thermal_cpufreq_exit(void) { if (acpi_thermal_cpufreq_is_init) - cpufreq_unregister_notifier - (&acpi_thermal_cpufreq_notifier_block, - CPUFREQ_POLICY_NOTIFIER); + thermal_cooling_unregister_notifier( + &cpufreq_cooling_notifier_block); acpi_thermal_cpufreq_is_init = 0; } -#else /* ! CONFIG_CPU_FREQ */ -static int cpufreq_get_max_state(unsigned int cpu) -{ - return 0; -} - -static int cpufreq_get_cur_state(unsigned int cpu) +/* + * Emulate "per package data" using per cpu data (which should really be + * provided elsewhere) + * + * Note we can lose a CPU on cpu hotunplug, in this case we forget the state + * temporarily. Fortunately that's not a big issue here (I hope) + */ +static int phys_package_first_cpu(int cpu) { - return 0; -} + int i; + int id = topology_physical_package_id(cpu); -static int cpufreq_set_cur_state(unsigned int cpu, int state) -{ + for_each_online_cpu(i) + if (topology_physical_package_id(i) == id) + return i; return 0; } -#endif - /* thermal cooling device callbacks */ static int acpi_processor_max_state(struct acpi_processor *pr) { @@ -198,57 +157,22 @@ static int acpi_processor_max_state(struct acpi_processor *pr) return max_state; } -static int -processor_get_max_state(struct thermal_cooling_device *cdev, - unsigned long *state) -{ - struct acpi_device *device = cdev->devdata; - struct acpi_processor *pr; - - if (!device) - return -EINVAL; - - pr = acpi_driver_data(device); - if (!pr) - return -EINVAL; - - *state = acpi_processor_max_state(pr); - return 0; -} -static int -processor_get_cur_state(struct thermal_cooling_device *cdev, - unsigned long *cur_state) +static int acpi_processor_cur_state(struct acpi_processor *pr) { - struct acpi_device *device = cdev->devdata; - struct acpi_processor *pr; - - if (!device) - return -EINVAL; - - pr = acpi_driver_data(device); - if (!pr) - return -EINVAL; - - *cur_state = cpufreq_get_cur_state(pr->id); + int cur_state = 0; + cur_state = cpufreq_get_cur_state(pr->id); if (pr->flags.throttling) - *cur_state += pr->throttling.state; - return 0; + cur_state += pr->throttling.state; + return cur_state; } -static int -processor_set_cur_state(struct thermal_cooling_device *cdev, - unsigned long state) +static int acpi_processor_set_cur_state(struct acpi_processor *pr, + struct thermal_cooling_status *cooling, unsigned long event) { - struct acpi_device *device = cdev->devdata; - struct acpi_processor *pr; - int result = 0; - int max_pstate; - - if (!device) - return -EINVAL; + int result = 0, level = 0; + int max_pstate, state = cooling->new_state; - pr = acpi_driver_data(device); if (!pr) return -EINVAL; @@ -257,20 +181,81 @@ processor_set_cur_state(struct thermal_cooling_device *cdev, if (state > acpi_processor_max_state(pr)) return -EINVAL; - if (state <= max_pstate) { + if (state <= max_pstate && event == COOLING_SET_STATE_PRE) { if (pr->flags.throttling && pr->throttling.state) result = acpi_processor_set_throttling(pr, 0, false); - cpufreq_set_cur_state(pr->id, state); - } else { - cpufreq_set_cur_state(pr->id, max_pstate); + } else if (state > max_pstate && event == COOLING_SET_STATE_POST) { result = acpi_processor_set_throttling(pr, state - max_pstate, false); } + + level = acpi_processor_freq_level(pr->id, state); + cooling->new_state = level; + return result; } -const struct thermal_cooling_device_ops processor_cooling_ops = { - .get_max_state = processor_get_max_state, - .get_cur_state = processor_get_cur_state, - .set_cur_state = processor_set_cur_state, +static int acpi_cpufreq_cooling_notifier(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct thermal_cooling_status *cooling = data; + struct acpi_device *device = NULL; + struct acpi_processor *pr; + int i; + + for_each_online_cpu(i) + if (per_cpu(acpi_dev, i) == cooling->devdata) { + device = cooling->devdata; + break; + } + + if (device == NULL) + return 0; /* notfier for some other client */ + + pr = acpi_driver_data(device); + switch (event) { + case COOLING_SET_STATE_PRE: + case COOLING_SET_STATE_POST: + acpi_processor_set_cur_state(pr, cooling, event); + break; + case COOLING_GET_MAX_STATE: + cooling->max_state = acpi_processor_max_state(pr); + break; + case COOLING_GET_CUR_STATE: + cooling->cur_state = acpi_processor_cur_state(pr); + break; + default: + return -EINVAL; + } + return 0; +} + +static struct notifier_block cpufreq_cooling_notifier_block = { + .notifier_call = acpi_cpufreq_cooling_notifier, }; + +struct thermal_cooling_device * +acpi_processor_cooling_register(struct acpi_device *device) +{ + struct thermal_cooling_device *cdev; + struct acpi_processor *pr = acpi_driver_data(device); + int cpu = phys_package_first_cpu(pr->id); + int i; + int id = topology_physical_package_id(cpu); + struct cpumask cpus; + + for_each_online_cpu(i) + if (topology_physical_package_id(i) == id) + cpumask_set_cpu(i, &cpus); + + cdev = cpufreq_cooling_register(&cpus, (void *)device); + per_cpu(acpi_dev, id) = device; + return cdev; +} +#else /* ! CONFIG_CPU_FREQ */ +struct thermal_cooling_device * +acpi_processor_cooling_register(struct acpi_device *device) +{ + return NULL; +} +#endif diff --git a/include/acpi/processor.h b/include/acpi/processor.h index 6eb1d3c..d6e8f67 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -348,7 +348,8 @@ static inline void acpi_processor_syscore_exit(void) {} /* in processor_thermal.c */ int acpi_processor_get_limit_info(struct acpi_processor *pr); -extern const struct thermal_cooling_device_ops processor_cooling_ops; +struct thermal_cooling_device * +acpi_processor_cooling_register(struct acpi_device *device); #ifdef CONFIG_CPU_FREQ void acpi_thermal_cpufreq_init(void); void acpi_thermal_cpufreq_exit(void);
This patch upgrades the ACPI cpufreq cooling portions to use the generic cpufreq cooling infrastructure. There should not be any functionality related changes as the same behaviour is provided by the generic cpufreq APIs with the notifier mechanism. Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> --- drivers/acpi/processor_driver.c | 6 +- drivers/acpi/processor_thermal.c | 235 ++++++++++++++++++-------------------- include/acpi/processor.h | 3 +- 3 files changed, 115 insertions(+), 129 deletions(-)