diff mbox

[PATCHv4,2/2] ARM: dts: unuse the slot-node and deprecated support-highspeed for dw-mmc.

Message ID 1401934928-7300-3-git-send-email-jh80.chung@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Jaehoon Chung June 5, 2014, 2:22 a.m. UTC 
dw-mmc controller can support the multiple slot.
But, there is not use-case anywhere. So we don't need to support the
slot-node for dw-mmc controller.
And "support-highspeed" property in dw-mmc is deprecated.
"support-highspeed" property can be replaced to "cap-sd/mmc-highspeed".

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
---
Changelog V4:
	- Remove the slot-node.
	- Rename Subject.
		"[PATCHv3 4/4]ARM: dts: replace the slot property into slot sub-node for dwmmc"
Changelog V3:
	- Merge "[PATCH 2/5] mmc: dw_mmc: rmove the "supports-highspeed" property"
Changelog V2:
	- None

 .../devicetree/bindings/mmc/exynos-dw-mshc.txt     |   17 ++++--------
 .../devicetree/bindings/mmc/k3-dw-mshc.txt         |   12 ++++-----
 .../devicetree/bindings/mmc/synopsys-dw-mshc.txt   |   12 ++++-----
 arch/arm/boot/dts/exynos4412-odroidx.dts           |    8 ++----
 arch/arm/boot/dts/exynos4412-origen.dts            |    8 ++----
 arch/arm/boot/dts/exynos4412-trats2.dts            |    8 ++----
 arch/arm/boot/dts/exynos5250-arndale.dts           |   18 ++++---------
 arch/arm/boot/dts/exynos5250-cros-common.dtsi      |   27 +++++---------------
 arch/arm/boot/dts/exynos5250-smdk5250.dts          |   18 ++++---------
 arch/arm/boot/dts/exynos5250-snow.dts              |    6 ++---
 arch/arm/boot/dts/exynos5420-arndale-octa.dts      |   16 +++---------
 arch/arm/boot/dts/exynos5420-smdk5420.dts          |   16 +++---------
 arch/arm/boot/dts/rk3066a-bqcurie2.dts             |   16 +++---------
 arch/arm/boot/dts/socfpga_arria5.dtsi              |    5 ++--
 arch/arm/boot/dts/socfpga_cyclone5.dtsi            |    9 +++----
 arch/arm/boot/dts/socfpga_vt.dts                   |    9 +++----
 16 files changed, 61 insertions(+), 144 deletions(-)

Comments

Tushar Behera June 5, 2014, 3:09 a.m. UTC | #1 
On 06/05/2014 07:52 AM, Jaehoon Chung wrote:
> dw-mmc controller can support the multiple slot.

'the' can be omitted, /s/slot/slots/

> But, there is not use-case anywhere. So we don't need to support the

/s/is not use-case/are no use-cases/

> slot-node for dw-mmc controller.
> And "support-highspeed" property in dw-mmc is deprecated.
> "support-highspeed" property can be replaced to "cap-sd/mmc-highspeed".
> 
> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

[ ... ]

> diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
> index 532b1d4..60d90c9 100644
> --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
> +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
> @@ -46,13 +46,14 @@ Required Properties:
>        - if CIU clock divider value is 0 (that is divide by 1), both tx and rx
>          phase shift clocks should be 0.
>  
> -Required properties for a slot:
> +Required properties for a slot (Deprecated - Support the one slot per host):

"Support only one slot per host" ?

>  
>  * gpios: specifies a list of gpios used for command, clock and data bus. The
>    first gpio is the command line and the second gpio is the clock line. The
>    rest of the gpios (depending on the bus-width property) are the data lines in
>    no particular order. The format of the gpio specifier depends on the gpio
>    controller.
> + (Deprecated - Refer to Documentaion/devicetree/binding/samsung-pinctrl.txt)

Update reference:
Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
Jaehoon Chung June 5, 2014, 4:34 a.m. UTC | #2 
On 06/05/2014 12:09 PM, Tushar Behera wrote:
> On 06/05/2014 07:52 AM, Jaehoon Chung wrote:
>> dw-mmc controller can support the multiple slot.
> 
> 'the' can be omitted, /s/slot/slots/
> 
>> But, there is not use-case anywhere. So we don't need to support the
> 
> /s/is not use-case/are no use-cases/

Will fix.
> 
>> slot-node for dw-mmc controller.
>> And "support-highspeed" property in dw-mmc is deprecated.
>> "support-highspeed" property can be replaced to "cap-sd/mmc-highspeed".
>>
>> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> 
> [ ... ]
> 
>> diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
>> index 532b1d4..60d90c9 100644
>> --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
>> +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
>> @@ -46,13 +46,14 @@ Required Properties:
>>        - if CIU clock divider value is 0 (that is divide by 1), both tx and rx
>>          phase shift clocks should be 0.
>>  
>> -Required properties for a slot:
>> +Required properties for a slot (Deprecated - Support the one slot per host):
> 
> "Support only one slot per host" ?
Don't need to support the multiple slots at dw-mmc controller.
Recommend to use one slot per a host.
> 
>>  
>>  * gpios: specifies a list of gpios used for command, clock and data bus. The
>>    first gpio is the command line and the second gpio is the clock line. The
>>    rest of the gpios (depending on the bus-width property) are the data lines in
>>    no particular order. The format of the gpio specifier depends on the gpio
>>    controller.
>> + (Deprecated - Refer to Documentaion/devicetree/binding/samsung-pinctrl.txt)
> 
> Update reference:
> Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
Will Fix

Thanks for comments.

Best Regards,
Jaehoon Chung
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
index 532b1d4..60d90c9 100644
--- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
@@ -46,13 +46,14 @@  Required Properties:
       - if CIU clock divider value is 0 (that is divide by 1), both tx and rx
         phase shift clocks should be 0.
 
-Required properties for a slot:
+Required properties for a slot (Deprecated - Support the one slot per host):
 
 * gpios: specifies a list of gpios used for command, clock and data bus. The
   first gpio is the command line and the second gpio is the clock line. The
   rest of the gpios (depending on the bus-width property) are the data lines in
   no particular order. The format of the gpio specifier depends on the gpio
   controller.
+ (Deprecated - Refer to Documentaion/devicetree/binding/samsung-pinctrl.txt)
 
 Example:
 
@@ -69,21 +70,13 @@  Example:
 
 	dwmmc0@12200000 {
 		num-slots = <1>;
-		supports-highspeed;
 		broken-cd;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-			gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
-				<&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
-				<&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>,
-				<&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
-				<&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>;
-		};
+		bus-width = <8>;
 	};
diff --git a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
index b8653ea..514c0fc 100644
--- a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
@@ -34,13 +34,11 @@  Example:
 		num-slots = <1>;
 		vmmc-supply = <&ldo12>;
 		fifo-depth = <0x100>;
-		supports-highspeed;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd_pmx_pins &sd_cfg_func1 &sd_cfg_func2>;
-		slot@0 {
-			reg = <0>;
-			bus-width = <4>;
-			disable-wp;
-			cd-gpios = <&gpio10 3 0>;
-		};
+		bus-width = <4>;
+		disable-wp;
+		cd-gpios = <&gpio10 3 0>;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
 	};
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
index 2d4a725..346c609 100644
--- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
@@ -67,7 +67,8 @@  Optional properties:
 * card-detect-delay: Delay in milli-seconds before detecting card after card
   insert event. The default value is 0.
 
-* supports-highspeed: Enables support for high speed cards (up to 50MHz)
+* supports-highspeed (DEPRECATED): Enables support for high speed cards (up to 50MHz)
+			   (use "cap-mmc-highspeed" or "cap-sd-highspeed" instead)
 
 * broken-cd: as documented in mmc core bindings.
 
@@ -98,14 +99,11 @@  board specific portions as listed below.
 		clock-frequency = <400000000>;
 		clock-freq-min-max = <400000 200000000>;
 		num-slots = <1>;
-		supports-highspeed;
 		broken-cd;
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		vmmc-supply = <&buck8>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
+		bus-width = <8>;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
 	};
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 31db28a..778aec6 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -45,17 +45,13 @@ 
 		status = "okay";
 
 		num-slots = <1>;
-		supports-highspeed;
 		broken-cd;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
+		bus-width = <8>;
+		cap-mmc-highspeed;
 	};
 
 	regulator_p3v3 {
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index e2c0dca..8832424 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -128,17 +128,13 @@ 
 		status = "okay";
 
 		num-slots = <1>;
-		supports-highspeed;
 		broken-cd;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
+		bus-width = <8>;
+		cap-mmc-highspeed;
 	};
 
 	codec@13400000 {
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 73be464..47b6f3a 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -459,7 +459,6 @@ 
 
 	mmc@12550000 {
 		num-slots = <1>;
-		supports-highspeed;
 		broken-cd;
 		non-removable;
 		card-detect-delay = <200>;
@@ -468,14 +467,11 @@ 
 		samsung,dw-mshc-ciu-div = <0>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
+		bus-width = <8>;
+		cap-mmc-highspeed;
 		pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 		pinctrl-names = "default";
 		status = "okay";
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
 	};
 
 	sd_reg: voltage-regulator@1 {
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 090f983..2f61e4d 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -399,7 +399,6 @@ 
 	mmc_0: mmc@12200000 {
 		status = "okay";
 		num-slots = <1>;
-		supports-highspeed;
 		broken-cd;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
@@ -408,17 +407,13 @@ 
 		vmmc-supply = <&mmc_reg>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
+		bus-width = <8>;
+		cap-mmc-highspeed;
 	};
 
 	mmc_2: mmc@12220000 {
 		status = "okay";
 		num-slots = <1>;
-		supports-highspeed;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
@@ -426,12 +421,9 @@ 
 		vmmc-supply = <&mmc_reg>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <4>;
-			disable-wp;
-		};
+		bus-width = <4>;
+		disable-wp;
+		cap-sd-highspeed;
 	};
 
 	i2s0: i2s@03830000 {
diff --git a/arch/arm/boot/dts/exynos5250-cros-common.dtsi b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
index 2c1560d..272bc84 100644
--- a/arch/arm/boot/dts/exynos5250-cros-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
@@ -248,7 +248,6 @@ 
 
 	mmc@12200000 {
 		num-slots = <1>;
-		supports-highspeed;
 		broken-cd;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
@@ -256,44 +255,32 @@ 
 		samsung,dw-mshc-ddr-timing = <1 2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
+		bus-width = <8>;
+		cap-mmc-highspeed;
 	};
 
 	mmc@12220000 {
 		num-slots = <1>;
-		supports-highspeed;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <4>;
-			wp-gpios = <&gpc2 1 0>;
-		};
+		bus-width = <4>;
+		wp-gpios = <&gpc2 1 0>;
 	};
 
 	mmc@12230000 {
 		num-slots = <1>;
-		supports-highspeed;
-		broken-cd;
 		card-detect-delay = <200>;
+		broken-cd;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
 		/* See board-specific dts files for pin setup */
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <4>;
-		};
+		bus-width = <4>;
+		cap-sd-highspeed;
 	};
 
 	spi_1: spi@12d30000 {
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index a794a70..e00ffc6 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -282,7 +282,6 @@ 
 	mmc@12200000 {
 		status = "okay";
 		num-slots = <1>;
-		supports-highspeed;
 		broken-cd;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
@@ -290,29 +289,22 @@ 
 		samsung,dw-mshc-ddr-timing = <1 2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
+		bus-width = <8>;
+		cap-mmc-highspeed;
 	};
 
 	mmc@12220000 {
 		status = "okay";
 		num-slots = <1>;
-		supports-highspeed;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <4>;
-			disable-wp;
-		};
+		bus-width = <4>;
+		disable-wp;
+		cap-sd-highspeed;
 	};
 
 	spi_1: spi@12d30000 {
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 1ce1088..2245278 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -190,10 +190,8 @@ 
 	 */
 	mmc@12230000 {
 		status = "okay";
-		slot@0 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
-		};
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
 	};
 
 	usb@12110000 {
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 80a3bf4..752715a 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -40,7 +40,6 @@ 
 	mmc@12200000 {
 		status = "okay";
 		broken-cd;
-		supports-highspeed;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <0 4>;
@@ -48,16 +47,12 @@ 
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
 		vmmc-supply = <&ldo10_reg>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
+		bus-width = <8>;
+		cap-mmc-highspeed;
 	};
 
 	mmc@12220000 {
 		status = "okay";
-		supports-highspeed;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
@@ -65,11 +60,8 @@ 
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
 		vmmc-supply = <&ldo10_reg>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <4>;
-		};
+		bus-width = <4>;
+		cap-sd-highspeed;
 	};
 
 	hsi2c_4: i2c@12CA0000 {
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 6910485..7f5e35b 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -71,34 +71,26 @@ 
 	mmc@12200000 {
 		status = "okay";
 		broken-cd;
-		supports-highspeed;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <0 4>;
 		samsung,dw-mshc-ddr-timing = <0 2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
+		bus-width = <8>;
+		cap-mmc-highspeed;
 	};
 
 	mmc@12220000 {
 		status = "okay";
-		supports-highspeed;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <4>;
-		};
+		bus-width = <4>;
+		cap-sd-highspeed;
 	};
 
 	dp-controller@145B0000 {
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index 035df40..0e618d5 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -58,12 +58,8 @@ 
 			pinctrl-names = "default";
 			pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
 			vmmc-supply = <&vcc_sd0>;
-
-			slot@0 {
-				reg = <0>;
-				bus-width = <4>;
-				disable-wp;
-			};
+			bus-width = <4>;
+			disable-wp;
 		};
 
 		dwmmc@10218000 { /* wifi */
@@ -73,12 +69,8 @@ 
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
-
-			slot@0 {
-				reg = <0>;
-				bus-width = <4>;
-				disable-wp;
-			};
+			bus-width = <4>;
+			disable-wp;
 		};
 
 		gpio-keys {
diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi
index 6c87b70..1da0e81 100644
--- a/arch/arm/boot/dts/socfpga_arria5.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria5.dtsi
@@ -29,12 +29,13 @@ 
 
 		dwmmc0@ff704000 {
 			num-slots = <1>;
-			supports-highspeed;
-			broken-cd;
 
 			slot@0 {
 				reg = <0>;
 				bus-width = <4>;
+				broken-cd;
+				cap-mmc-highspeed;
+				cap-sd-highspeed;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
index ca41b0e..c4ebf65 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5.dtsi
+++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
@@ -30,13 +30,10 @@ 
 
 		dwmmc0@ff704000 {
 			num-slots = <1>;
-			supports-highspeed;
 			broken-cd;
-
-			slot@0 {
-				reg = <0>;
-				bus-width = <4>;
-			};
+			bus-width = <4>;
+			cap-mmc-highspeed;
+			cap-sd-highspeed;
 		};
 
 		ethernet@ff702000 {
diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts
index 87d6f75..07e7206 100644
--- a/arch/arm/boot/dts/socfpga_vt.dts
+++ b/arch/arm/boot/dts/socfpga_vt.dts
@@ -43,13 +43,10 @@ 
 
 		dwmmc0@ff704000 {
 			num-slots = <1>;
-			supports-highspeed;
 			broken-cd;
-
-			slot@0 {
-				reg = <0>;
-				bus-width = <4>;
-			};
+			bus-width = <4>;
+			cap-mmc-highspeed;
+			cap-sd-highspeed;
 		};
 
 		ethernet@ff700000 {