| Message ID | CAJ5Y-ebp1rrRwDWCWSqkSpFg0jr4JktzKpBhWQv9jrwxhqndQQ@mail.gmail.com (mailing list archive) |
|---|---|
| State | RFC, archived |
| Headers | show |
On Friday 20 June 2014 14:55:16 Ashwin Chaugule wrote: > So, in order to get an mbox->dev for ACPI platforms, we'd need an > entry in the DSDT table. That seems rather pointless, since the DSDT > is reserved for devices and is supposed to be OS agnostic. Since the > mailbox controller itself is not really a "device" with a resource > descriptor, I dont see the point in adding a dummy DSDT entry for the > sake of getting this `struct device`. Also, I'm told adding new > entries to this table requires registering a unique 4 character > identifier and approval from some committees. If there are other ways > to get this structure I'd like to hear about it. > > The other alternative would be to piggy back on the ACPI CPU detection > code, which looks for the ACPI0007 device node in the DSDT and use > that as the mbox controller device. This node is already registered > and is an established method to detect CPUs. But I'm not sure what > happens when CPUs are hotplugged off, we surely dont want mailbox > clients such as PCC to break. The main question here is whether you expect having to support multiple mailbox devices in an ACPI system. If you think there is never more than one, you wouldn't need a DSDT entry, but if you can end up in a situation where another device needs to specify which mailbox it is using, then you need that entry anyway. Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Arnd, On 20 June 2014 15:08, Arnd Bergmann <arnd@arndb.de> wrote: > On Friday 20 June 2014 14:55:16 Ashwin Chaugule wrote: >> So, in order to get an mbox->dev for ACPI platforms, we'd need an >> entry in the DSDT table. That seems rather pointless, since the DSDT >> is reserved for devices and is supposed to be OS agnostic. Since the >> mailbox controller itself is not really a "device" with a resource >> descriptor, I dont see the point in adding a dummy DSDT entry for the >> sake of getting this `struct device`. Also, I'm told adding new >> entries to this table requires registering a unique 4 character >> identifier and approval from some committees. If there are other ways >> to get this structure I'd like to hear about it. >> >> The other alternative would be to piggy back on the ACPI CPU detection >> code, which looks for the ACPI0007 device node in the DSDT and use >> that as the mbox controller device. This node is already registered >> and is an established method to detect CPUs. But I'm not sure what >> happens when CPUs are hotplugged off, we surely dont want mailbox >> clients such as PCC to break. > > The main question here is whether you expect having to support multiple > mailbox devices in an ACPI system. If you think there is never more than > one, you wouldn't need a DSDT entry, but if you can end up in a situation > where another device needs to specify which mailbox it is using, then > you need that entry anyway. At this point, I dont see the need for multiple mailbox devices. But I'm not seeing why we'd need a DSDT entry only if there are more than one mailbox devices? I'd obviously prefer not having a DSDT entry for this, and the patch I posted is the only way I could see to keep DT and ACPI mbox supported at runtime without DSDT involved. Please let me know if there are better ways. Cheers, Ashwin -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Friday 20 June 2014 15:29:18 Ashwin Chaugule wrote: > > On 20 June 2014 15:08, Arnd Bergmann <arnd@arndb.de> wrote: > > On Friday 20 June 2014 14:55:16 Ashwin Chaugule wrote: > >> So, in order to get an mbox->dev for ACPI platforms, we'd need an > >> entry in the DSDT table. That seems rather pointless, since the DSDT > >> is reserved for devices and is supposed to be OS agnostic. Since the > >> mailbox controller itself is not really a "device" with a resource > >> descriptor, I dont see the point in adding a dummy DSDT entry for the > >> sake of getting this `struct device`. Also, I'm told adding new > >> entries to this table requires registering a unique 4 character > >> identifier and approval from some committees. If there are other ways > >> to get this structure I'd like to hear about it. > >> > >> The other alternative would be to piggy back on the ACPI CPU detection > >> code, which looks for the ACPI0007 device node in the DSDT and use > >> that as the mbox controller device. This node is already registered > >> and is an established method to detect CPUs. But I'm not sure what > >> happens when CPUs are hotplugged off, we surely dont want mailbox > >> clients such as PCC to break. > > > > The main question here is whether you expect having to support multiple > > mailbox devices in an ACPI system. If you think there is never more than > > one, you wouldn't need a DSDT entry, but if you can end up in a situation > > where another device needs to specify which mailbox it is using, then > > you need that entry anyway. > > At this point, I dont see the need for multiple mailbox devices. But > I'm not seeing why we'd need a DSDT entry only if there are more than > one mailbox devices? I'd obviously prefer not having a DSDT entry for > this, and the patch I posted is the only way I could see to keep DT > and ACPI mbox supported at runtime without DSDT involved. Please let > me know if there are better ways. It's mostly a matter of consistency: We can have multiple interrupt controllers, pin controllers, clock controllers, dma engines, etc, and in the DT case we use references to the nodes wherever we have other devices referring to a mailbox name. I believe Intel's embedded chips are moving in the same direction with their ACPI support. If the ACPI spec gains support for mailbox devices, locking them into having only a single device may be a problem later for them. Note that "device" here doesn't have to mean a platform device that is instantiated from DSDT, it can be any mailbox provider that is registered in an arbitrary way, as long as you have a method to map back from the (consumer-device, name-string) tuple back to the (provider, channel) tuple. I have read your patch again now and noticed that you actually tried to do this, but unfortunately you got it wrong by requiring the consumer to fill out the name of the provider in the request. You can't do that, because it's not generic enough to support devices that can be reused, and it means that drivers using the API are never portable between DT and ACPI. You have to get rid of the "ctrl_name" field in the mbox_client structure and change the lookup to be based only on cd->dev and cl->chan_name, using whatever tables you have available in ACPI. Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mailbox/mailbox.c b/drivers/mailbox/mailbox.c index d83d12c..e2704f5 100644 --- a/drivers/mailbox/mailbox.c +++ b/drivers/mailbox/mailbox.c @@ -17,6 +17,7 @@ #include <linux/err.h> #include <linux/module.h> #include <linux/device.h> +#include <linux/acpi.h> #include <linux/mailbox_client.h> #include <linux/mailbox_controller.h> @@ -273,100 +274,166 @@ int mbox_send_message(struct mbox_chan *chan, void *mssg) } EXPORT_SYMBOL_GPL(mbox_send_message); -/** - * mbox_request_channel - Request a mailbox channel. - * @cl: Identity of the client requesting the channel. - * - * The Client specifies its requirements and capabilities while asking for - * a mailbox channel by name. It can't be called from atomic context. - * The channel is exclusively allocated and can't be used by another - * client before the owner calls mbox_free_channel. - * After assignment, any packet received on this channel will be - * handed over to the client via the 'rx_callback'. - * - * Return: Pointer to the channel assigned to the client if successful. - * ERR_PTR for request failure. - */ -struct mbox_chan *mbox_request_channel(struct mbox_client *cl) +static int init_channel(struct mbox_chan *chan, + struct mbox_client *cl) +{ + unsigned long flags; + int ret; + + if (!chan) { + pr_err("No mailbox channel specified\n"); + return -EINVAL; + } + + spin_lock_irqsave(&chan->lock, flags); + chan->msg_free = 0; + chan->msg_count = 0; + chan->active_req = NULL; + chan->cl = cl; + + if (!cl->tx_tout) /* wait for ever */ + cl->tx_tout = msecs_to_jiffies(3600000); + else + cl->tx_tout = msecs_to_jiffies(cl->tx_tout); + if (chan->txdone_method == TXDONE_BY_POLL + && cl->knows_txdone) + chan->txdone_method |= TXDONE_BY_ACK; + spin_unlock_irqrestore(&chan->lock, flags); + + ret = chan->mbox->ops->startup(chan); + if (ret) { + pr_err("Unable to startup the chan\n"); + mbox_free_channel(chan); + chan = ERR_PTR(ret); + } + + return ret; +} + +static int get_acpi_mbox_chan(struct mbox_client *cl, + struct mbox_chan **chan) +{ + struct mbox_controller *mbox; + int chan_id, ret, len; + char *chan_ptr; + + if (!cl->chan_name) + return -ENODEV; + + list_for_each_entry(mbox, &mbox_cons, node) { + if (mbox->name) { + /* + * The cl->chan_name has the format => controller:channel + * as described in mailbox_client.h + */ + + len = strlen(mbox->name); + chan_ptr = cl->chan_name + len + 1; + + ret = kstrtou32(cl->chan_name, 0, &chan_id); + + if (ret < 0) { + pr_err("Err while parsing mailbox:%s channel idx\n", + mbox->name); + continue; + } + + if (!strncmp(cl->chan_name, mbox->name, len)) { + *chan = &mbox->chans[chan_id]; + return init_channel(*chan, cl); + } + } + } + + return -ENODEV; +} + +static int get_of_mbox_chan(struct mbox_client *cl, + struct mbox_chan **chan) { struct device *dev = cl->dev; struct mbox_controller *mbox; struct of_phandle_args spec; - struct mbox_chan *chan; - unsigned long flags; int count, i, ret; if (!dev || !dev->of_node) { pr_err("%s: No owner device node\n", __func__); - return ERR_PTR(-ENODEV); + return -ENODEV; } count = of_property_count_strings(dev->of_node, "mbox-names"); if (count < 0) { pr_err("%s: mbox-names property of node '%s' missing\n", __func__, dev->of_node->full_name); - return ERR_PTR(-ENODEV); + return -ENODEV; } - - mutex_lock(&con_mutex); - - ret = -ENODEV; for (i = 0; i < count; i++) { const char *s; if (of_property_read_string_index(dev->of_node, - "mbox-names", i, &s)) + "mbox-names", i, &s)) continue; if (strcmp(cl->chan_name, s)) continue; if (of_parse_phandle_with_args(dev->of_node, - "mbox", "#mbox-cells", i, &spec)) + "mbox", "#mbox-cells", i, &spec)) continue; - chan = NULL; list_for_each_entry(mbox, &mbox_cons, node) if (mbox->dev->of_node == spec.np) { - chan = mbox->of_xlate(mbox, &spec); + *chan = mbox->of_xlate(mbox, &spec); break; } of_node_put(spec.np); - if (!chan) + if (!(*chan)) continue; ret = -EBUSY; - if (!chan->cl && try_module_get(mbox->dev->driver->owner)) + if (!(*chan)->cl && acpi_disabled && + try_module_get(mbox->dev->driver->owner)) break; } if (i == count) { mutex_unlock(&con_mutex); - return ERR_PTR(ret); + return ret; } - spin_lock_irqsave(&chan->lock, flags); - chan->msg_free = 0; - chan->msg_count = 0; - chan->active_req = NULL; - chan->cl = cl; - if (!cl->tx_tout) /* wait for ever */ - cl->tx_tout = msecs_to_jiffies(3600000); + return init_channel(*chan, cl); +} + +/** + * mbox_request_channel - Request a mailbox channel. + * @cl: Identity of the client requesting the channel. + * + * The Client specifies its requirements and capabilities while asking for + * a mailbox channel by name. It can't be called from atomic context. + * The channel is exclusively allocated and can't be used by another + * client before the owner calls mbox_free_channel. + * After assignment, any packet received on this channel will be + * handed over to the client via the 'rx_callback'. + * + * Return: Pointer to the channel assigned to the client if successful. + * ERR_PTR for request failure. + */ +struct mbox_chan *mbox_request_channel(struct mbox_client *cl) +{ + struct mbox_chan *chan = NULL; + int ret; + + mutex_lock(&con_mutex); + + if (acpi_disabled) + ret = get_of_mbox_chan(cl, &chan); else - cl->tx_tout = msecs_to_jiffies(cl->tx_tout); - if (chan->txdone_method == TXDONE_BY_POLL - && cl->knows_txdone) - chan->txdone_method |= TXDONE_BY_ACK; - spin_unlock_irqrestore(&chan->lock, flags); + ret = get_acpi_mbox_chan(cl, &chan); - ret = chan->mbox->ops->startup(chan); - if (ret) { - pr_err("Unable to startup the chan\n"); - mbox_free_channel(chan); - chan = ERR_PTR(ret); - } + if (ret) + pr_err("No mailbox channels found\n"); mutex_unlock(&con_mutex); return chan; @@ -394,7 +461,9 @@ void mbox_free_channel(struct mbox_chan *chan) if (chan->txdone_method == (TXDONE_BY_POLL | TXDONE_BY_ACK)) chan->txdone_method = TXDONE_BY_POLL; - module_put(chan->mbox->dev->driver->owner); + if (chan->mbox->dev) + module_put(chan->mbox->dev->driver->owner); + spin_unlock_irqrestore(&chan->lock, flags); } EXPORT_SYMBOL_GPL(mbox_free_channel); @@ -422,7 +491,15 @@ int mbox_controller_register(struct mbox_controller *mbox) int i, txdone; /* Sanity check */ - if (!mbox || !mbox->dev || !mbox->ops || !mbox->num_chans) + if (!mbox || !mbox->ops || !mbox->num_chans) + return -EINVAL; + + /* + * For ACPI platforms, to get mbox->dev, we'd need to + * have a fake meaningless entry in the DSDT for the + * mailbox controller. + */ + if (acpi_disabled && !mbox->dev) return -EINVAL; if (mbox->txdone_irq) diff --git a/include/linux/mailbox_client.h b/include/linux/mailbox_client.h index bbac2d2..716fbae 100644 --- a/include/linux/mailbox_client.h +++ b/include/linux/mailbox_client.h @@ -29,7 +29,7 @@ struct mbox_chan; */ struct mbox_client { struct device *dev; - const char *chan_name; + char *chan_name; void (*rx_callback)(struct mbox_client *cl, void *mssg); void (*tx_done)(struct mbox_client *cl, void *mssg, enum mbox_result r); bool tx_block; diff --git a/include/linux/mailbox_controller.h b/include/linux/mailbox_controller.h index cf81e80..06476ef 100644 --- a/include/linux/mailbox_controller.h +++ b/include/linux/mailbox_controller.h @@ -78,6 +78,7 @@ struct mbox_controller { unsigned period; /* Hook to add to the global controller list */ struct list_head node; + char *name; } __aligned(32); /*