diff mbox

[1/3,v3] mfd: arizona: Export function to control subsystem DVFS

Message ID 1403540909-22013-2-git-send-email-ckeepax@opensource.wolfsonmicro.com (mailing list archive)
State New, archived
Headers show

Commit Message

Charles Keepax June 23, 2014, 4:28 p.m. UTC 
From: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>

Moving this control from being a side-effect of the LDO1
regulator driver to a specific exported function.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---
 drivers/mfd/arizona-core.c       |   87 ++++++++++++++++++++++++++++++++++++++
 include/linux/mfd/arizona/core.h |   12 +++++
 2 files changed, 99 insertions(+), 0 deletions(-)

Comments

Lee Jones June 27, 2014, 8:31 a.m. UTC | #1 
On Mon, 23 Jun 2014, Charles Keepax wrote:

> From: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
> 
> Moving this control from being a side-effect of the LDO1
> regulator driver to a specific exported function.
> 
> Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
> ---
>  drivers/mfd/arizona-core.c       |   87 ++++++++++++++++++++++++++++++++++++++
>  include/linux/mfd/arizona/core.h |   12 +++++
>  2 files changed, 99 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
> index cfc191a..80f79ec 100644
> --- a/drivers/mfd/arizona-core.c
> +++ b/drivers/mfd/arizona-core.c
> @@ -94,6 +94,92 @@ int arizona_clk32k_disable(struct arizona *arizona)
>  }
>  EXPORT_SYMBOL_GPL(arizona_clk32k_disable);
>  
> +int arizona_dvfs_up(struct arizona *arizona, unsigned int flags)
> +{
> +	unsigned int new_flags;
> +	int ret = 0;
> +
> +	mutex_lock(&arizona->subsys_max_lock);
> +
> +	new_flags = arizona->subsys_max_rq | flags;
> +
> +	if (arizona->subsys_max_rq != new_flags) {
> +		switch (arizona->type) {
> +		case WM5102:
> +		case WM8997:
> +			ret = regulator_set_voltage(arizona->dcvdd,
> +						    1800000, 1800000);
> +			if (ret != 0) {
> +				dev_err(arizona->dev,
> +					"Failed to raise dcvdd (%d)\n", ret);

Are you sure this message is accurate.  What if the voltage were
already v1.8?  Then you wouldn't technically be trying to raise it.

[...]
diff mbox

Patch

diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index cfc191a..80f79ec 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -94,6 +94,92 @@  int arizona_clk32k_disable(struct arizona *arizona)
 }
 EXPORT_SYMBOL_GPL(arizona_clk32k_disable);
 
+int arizona_dvfs_up(struct arizona *arizona, unsigned int flags)
+{
+	unsigned int new_flags;
+	int ret = 0;
+
+	mutex_lock(&arizona->subsys_max_lock);
+
+	new_flags = arizona->subsys_max_rq | flags;
+
+	if (arizona->subsys_max_rq != new_flags) {
+		switch (arizona->type) {
+		case WM5102:
+		case WM8997:
+			ret = regulator_set_voltage(arizona->dcvdd,
+						    1800000, 1800000);
+			if (ret != 0) {
+				dev_err(arizona->dev,
+					"Failed to raise dcvdd (%d)\n", ret);
+				goto err;
+			}
+
+			ret = regmap_update_bits(arizona->regmap,
+					ARIZONA_DYNAMIC_FREQUENCY_SCALING_1,
+					ARIZONA_SUBSYS_MAX_FREQ, 1);
+			if (ret != 0) {
+				dev_err(arizona->dev,
+					"Failed to enable subsys max (%d)\n",
+					ret);
+				regulator_set_voltage(arizona->dcvdd,
+						      1200000, 1800000);
+				goto err;
+			}
+			break;
+
+		default:
+			break;
+		}
+
+		arizona->subsys_max_rq = new_flags;
+	}
+err:
+	mutex_unlock(&arizona->subsys_max_lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(arizona_dvfs_up);
+
+int arizona_dvfs_down(struct arizona *arizona, unsigned int flags)
+{
+	int ret = 0;
+
+	mutex_lock(&arizona->subsys_max_lock);
+
+	if ((arizona->subsys_max_rq & flags) != flags)
+		dev_warn(arizona->dev, "Unbalanced DVFS down: %x\n", flags);
+
+	arizona->subsys_max_rq &= ~flags;
+
+	if (arizona->subsys_max_rq == 0) {
+		switch (arizona->type) {
+		case WM5102:
+		case WM8997:
+			ret = regmap_update_bits(arizona->regmap,
+					ARIZONA_DYNAMIC_FREQUENCY_SCALING_1,
+					ARIZONA_SUBSYS_MAX_FREQ, 0);
+			if (ret != 0)
+				dev_err(arizona->dev,
+					"Failed to disable subsys max (%d)\n",
+					ret);
+
+			ret = regulator_set_voltage(arizona->dcvdd,
+						    1200000, 1800000);
+			if (ret != 0)
+				dev_err(arizona->dev,
+					"Failed to lower dcvdd (%d)\n", ret);
+			break;
+
+		default:
+			break;
+		}
+	}
+
+	mutex_unlock(&arizona->subsys_max_lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(arizona_dvfs_down);
+
 static irqreturn_t arizona_clkgen_err(int irq, void *data)
 {
 	struct arizona *arizona = data;
@@ -641,6 +727,7 @@  int arizona_dev_init(struct arizona *arizona)
 
 	dev_set_drvdata(arizona->dev, arizona);
 	mutex_init(&arizona->clk_lock);
+	mutex_init(&arizona->subsys_max_lock);
 
 	if (dev_get_platdata(arizona->dev))
 		memcpy(&arizona->pdata, dev_get_platdata(arizona->dev),
diff --git a/include/linux/mfd/arizona/core.h b/include/linux/mfd/arizona/core.h
index a614b33..4aec6a3 100644
--- a/include/linux/mfd/arizona/core.h
+++ b/include/linux/mfd/arizona/core.h
@@ -109,6 +109,9 @@  struct arizona {
 	struct mutex clk_lock;
 	int clk32k_ref;
 
+	struct mutex subsys_max_lock;
+	unsigned int subsys_max_rq;
+
 	struct snd_soc_dapm_context *dapm;
 
 	int tdm_width[ARIZONA_MAX_AIF];
@@ -118,8 +121,17 @@  struct arizona {
 	uint8_t dac_comp_enabled;
 };
 
+#define ARIZONA_DVFS_SR1_RQ          0x00000001
+#define ARIZONA_DVFS_SR2_RQ          0x00000002
+#define ARIZONA_DVFS_SR3_RQ          0x00000004
+#define ARIZONA_DVFS_ASR1_RQ         0x00000010
+#define ARIZONA_DVFS_ASR2_RQ         0x00000020
+#define ARIZONA_DVFS_ADSP1_RQ        0x00010000
+
 int arizona_clk32k_enable(struct arizona *arizona);
 int arizona_clk32k_disable(struct arizona *arizona);
+int arizona_dvfs_up(struct arizona *arizona, unsigned int mask);
+int arizona_dvfs_down(struct arizona *arizona, unsigned int mask);
 
 int arizona_request_irq(struct arizona *arizona, int irq, char *name,
 			irq_handler_t handler, void *data);