| Message ID | f61b31d0b08c8a0b6ee295d5b0da62ead23983c9.1403807781.git.jsarha@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 26/06/14 22:20, Jyri Sarha wrote: > Add audio datamember to hdmi struct and call register and unregister > functions form hdmi_audio.c. Register function registers the > integrated cpu dai, dummy HDMI codec, and simple-card machine driver > for complete HDMI audio support. > > Signed-off-by: Jyri Sarha <jsarha@ti.com> > --- > drivers/video/fbdev/omap2/dss/hdmi4.c | 45 +++++++++++++++++++++++++++++++++ > 1 file changed, 45 insertions(+) > > diff --git a/drivers/video/fbdev/omap2/dss/hdmi4.c b/drivers/video/fbdev/omap2/dss/hdmi4.c > index 342ddb4..48f11f8 100644 > --- a/drivers/video/fbdev/omap2/dss/hdmi4.c > +++ b/drivers/video/fbdev/omap2/dss/hdmi4.c > @@ -34,6 +34,11 @@ > #include <linux/regulator/consumer.h> > #include <video/omapdss.h> > > +#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO) No need for the ifdef here either. > +#include <sound/soc.h> > +#include <sound/soc-dai.h> > +#endif > + > #include "hdmi4_core.h" > #include "dss.h" > #include "dss_features.h" > @@ -52,6 +57,9 @@ static struct { > struct clk *sys_clk; > struct regulator *vdda_hdmi_dac_reg; > > +#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO) > + struct hdmi_audio_data audio; > +#endif > bool core_enabled; > > struct omap_dss_device output; > @@ -671,6 +679,21 @@ err: > return r; > } > > +#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO) > +static struct snd_soc_dai_driver omap_hdmi_dai = { > + .name = "omap4-hdmi-dai", > + .playback = { > + .channels_min = 2, > + .channels_max = 8, > + .rates = (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | > + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | > + SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 | > + SNDRV_PCM_RATE_192000), > + .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE, > + }, > +}; > +#endif > + > /* HDMI HW IP initialisation */ > static int omapdss_hdmihw_probe(struct platform_device *pdev) > { > @@ -727,6 +750,25 @@ static int omapdss_hdmihw_probe(struct platform_device *pdev) > > hdmi_init_output(pdev); > > +#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO) > + /* drvdata is only used by HDMI audio */ > + hdmi.audio.hdmi_lock = &hdmi.lock; > + hdmi.audio.wp = &hdmi.wp; > + hdmi.audio.core = &hdmi.core; > + hdmi.audio.cfg = &hdmi.cfg; > + hdmi.audio.hdmi_dai_drv = &omap_hdmi_dai; > + hdmi.audio.audio_start = hdmi4_audio_start; > + hdmi.audio.audio_stop = hdmi4_audio_stop; > + hdmi.audio.audio_config = hdmi4_audio_config; > + dev_set_drvdata(&pdev->dev, &hdmi.audio); > + r = hdmi_audio_register(pdev); > + if (r) { > + DSSERR("Registering HDMI audio failed\n"); > + hdmi_uninit_output(pdev); > + pm_runtime_disable(&pdev->dev); > + return r; > + } > +#endif I don't think it's a good idea to reserve the driver data for audio. We need to change the hdmi drivers sooner or later to support multiple instances, and at that point having drvdata for audio will cause problems. If you don't want to make the hdmi struct public yet, maybe just add a function to this file which takes a pointer to the hdmi struct and returns the audio part. That way you can set the whole hdmi struct as driver data, which should be future safe. Tomi
On 06/27/2014 02:39 PM, Tomi Valkeinen wrote: > On 26/06/14 22:20, Jyri Sarha wrote: ... >> +#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO) >> + /* drvdata is only used by HDMI audio */ >> + hdmi.audio.hdmi_lock = &hdmi.lock; >> + hdmi.audio.wp = &hdmi.wp; >> + hdmi.audio.core = &hdmi.core; >> + hdmi.audio.cfg = &hdmi.cfg; >> + hdmi.audio.hdmi_dai_drv = &omap_hdmi_dai; >> + hdmi.audio.audio_start = hdmi4_audio_start; >> + hdmi.audio.audio_stop = hdmi4_audio_stop; >> + hdmi.audio.audio_config = hdmi4_audio_config; >> + dev_set_drvdata(&pdev->dev, &hdmi.audio); >> + r = hdmi_audio_register(pdev); >> + if (r) { >> + DSSERR("Registering HDMI audio failed\n"); >> + hdmi_uninit_output(pdev); >> + pm_runtime_disable(&pdev->dev); >> + return r; >> + } >> +#endif > > I don't think it's a good idea to reserve the driver data for audio. We > need to change the hdmi drivers sooner or later to support multiple > instances, and at that point having drvdata for audio will cause problems. > > If you don't want to make the hdmi struct public yet, maybe just add a > function to this file which takes a pointer to the hdmi struct and > returns the audio part. That way you can set the whole hdmi struct as > driver data, which should be future safe. > Adding a function is not as simple as that because the OMAP4 and OMAP5 structs are subtly different and hdmi_audio.c is common to both. I'll make the minimal changes to make the struct public. Cheers, Jyri
diff --git a/drivers/video/fbdev/omap2/dss/hdmi4.c b/drivers/video/fbdev/omap2/dss/hdmi4.c index 342ddb4..48f11f8 100644 --- a/drivers/video/fbdev/omap2/dss/hdmi4.c +++ b/drivers/video/fbdev/omap2/dss/hdmi4.c @@ -34,6 +34,11 @@ #include <linux/regulator/consumer.h> #include <video/omapdss.h> +#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO) +#include <sound/soc.h> +#include <sound/soc-dai.h> +#endif + #include "hdmi4_core.h" #include "dss.h" #include "dss_features.h" @@ -52,6 +57,9 @@ static struct { struct clk *sys_clk; struct regulator *vdda_hdmi_dac_reg; +#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO) + struct hdmi_audio_data audio; +#endif bool core_enabled; struct omap_dss_device output; @@ -671,6 +679,21 @@ err: return r; } +#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO) +static struct snd_soc_dai_driver omap_hdmi_dai = { + .name = "omap4-hdmi-dai", + .playback = { + .channels_min = 2, + .channels_max = 8, + .rates = (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | + SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 | + SNDRV_PCM_RATE_192000), + .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE, + }, +}; +#endif + /* HDMI HW IP initialisation */ static int omapdss_hdmihw_probe(struct platform_device *pdev) { @@ -727,6 +750,25 @@ static int omapdss_hdmihw_probe(struct platform_device *pdev) hdmi_init_output(pdev); +#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO) + /* drvdata is only used by HDMI audio */ + hdmi.audio.hdmi_lock = &hdmi.lock; + hdmi.audio.wp = &hdmi.wp; + hdmi.audio.core = &hdmi.core; + hdmi.audio.cfg = &hdmi.cfg; + hdmi.audio.hdmi_dai_drv = &omap_hdmi_dai; + hdmi.audio.audio_start = hdmi4_audio_start; + hdmi.audio.audio_stop = hdmi4_audio_stop; + hdmi.audio.audio_config = hdmi4_audio_config; + dev_set_drvdata(&pdev->dev, &hdmi.audio); + r = hdmi_audio_register(pdev); + if (r) { + DSSERR("Registering HDMI audio failed\n"); + hdmi_uninit_output(pdev); + pm_runtime_disable(&pdev->dev); + return r; + } +#endif dss_debugfs_create_file("hdmi", hdmi_dump_regs); return 0; @@ -734,6 +776,9 @@ static int omapdss_hdmihw_probe(struct platform_device *pdev) static int __exit omapdss_hdmihw_remove(struct platform_device *pdev) { +#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO) + hdmi_audio_unregister(pdev); +#endif hdmi_uninit_output(pdev); pm_runtime_disable(&pdev->dev);
Add audio datamember to hdmi struct and call register and unregister functions form hdmi_audio.c. Register function registers the integrated cpu dai, dummy HDMI codec, and simple-card machine driver for complete HDMI audio support. Signed-off-by: Jyri Sarha <jsarha@ti.com> --- drivers/video/fbdev/omap2/dss/hdmi4.c | 45 +++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+)