diff mbox

[v3] ARM: dts: Add cros_ec to exynos5420-peach-pit and exynos5800-peach-pi

Message ID 1403627332-4688-1-git-send-email-dianders@chromium.org (mailing list archive)
State New, archived
Headers show

Commit Message

Doug Anderson June 24, 2014, 4:28 p.m. UTC 
This adds cros_ec to exynos5420-peach-pit and exynos5800-peach-pi,
including:
* The keyboard
* The i2c tunnel
* The tps65090 under the i2c tunnel
* The battery under the i2c tunnel

To add extra motivation, it should be noted that tps65090 is one of
the things needed to get display-related FETs turned on for pit and
pi.

Note that this relies on a few outstanding changes:
* Needs (spi: s3c64xx: fix broken "cs_gpios" usage in the driver) and
  (spi: s3c64xx: for DT platofrms always get the chipselect info from
  DT node) to work properly and match the documented bindings.  See
  <https://patchwork.kernel.org/patch/4346701/> and
  <https://patchwork.kernel.org/patch/4346711/>

Signed-off-by: Doug Anderson <dianders@chromium.org>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Tushar Behera <tushar.b@samsung.com>
---
Changes in v3:
- Added aliases for tps65090 regulators as per Tushar.

Changes in v2:
- Now just one patch since mfd patch landed.
- Rebased to ToT linux-next

 arch/arm/boot/dts/exynos5420-peach-pit.dts | 145 +++++++++++++++++++++++++++++
 arch/arm/boot/dts/exynos5800-peach-pi.dts  | 145 +++++++++++++++++++++++++++++
 2 files changed, 290 insertions(+)

Comments

Javier Martinez Canillas July 17, 2014, 10:42 p.m. UTC | #1 
Hello Kukjin,

On 06/24/2014 06:28 PM, Doug Anderson wrote:
> This adds cros_ec to exynos5420-peach-pit and exynos5800-peach-pi,
> including:
> * The keyboard
> * The i2c tunnel
> * The tps65090 under the i2c tunnel
> * The battery under the i2c tunnel
> 
> To add extra motivation, it should be noted that tps65090 is one of
> the things needed to get display-related FETs turned on for pit and
> pi.
> 
> Note that this relies on a few outstanding changes:
> * Needs (spi: s3c64xx: fix broken "cs_gpios" usage in the driver) and
>   (spi: s3c64xx: for DT platofrms always get the chipselect info from
>   DT node) to work properly and match the documented bindings.  See
>   <https://patchwork.kernel.org/patch/4346701/> and
>   <https://patchwork.kernel.org/patch/4346711/>
> 
> Signed-off-by: Doug Anderson <dianders@chromium.org>
> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
> Tested-by: Tushar Behera <tushar.b@samsung.com>
> 

Mark Brown as already applied the SPI DT binding fix from Naveen [0] which was
the dependency for this patch and he said that will try to send the whole series
to Torvalds before the 3.16-rc cycle ends.

So I think that it's safe now if you want to pick this patch.

Thanks a lot!

Best regards,
Javier

[0]:
https://git.kernel.org/cgit/linux/kernel/git/broonie/spi.git/commit/?h=for-next&id=306972cedfdedc662dd8e32a6397d0e29f2ac90e
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Kim Kukjin July 18, 2014, 7:09 p.m. UTC | #2 
On 07/18/14 07:42, Javier Martinez Canillas wrote:
> Hello Kukjin,
>
Hi,

> On 06/24/2014 06:28 PM, Doug Anderson wrote:
>> This adds cros_ec to exynos5420-peach-pit and exynos5800-peach-pi,
>> including:
>> * The keyboard
>> * The i2c tunnel
>> * The tps65090 under the i2c tunnel
>> * The battery under the i2c tunnel
>>
>> To add extra motivation, it should be noted that tps65090 is one of
>> the things needed to get display-related FETs turned on for pit and
>> pi.
>>
>> Note that this relies on a few outstanding changes:
>> * Needs (spi: s3c64xx: fix broken "cs_gpios" usage in the driver) and
>>    (spi: s3c64xx: for DT platofrms always get the chipselect info from
>>    DT node) to work properly and match the documented bindings.  See
>>    <https://patchwork.kernel.org/patch/4346701/>  and
>>    <https://patchwork.kernel.org/patch/4346711/>
>>
>> Signed-off-by: Doug Anderson<dianders@chromium.org>
>> Tested-by: Javier Martinez Canillas<javier.martinez@collabora.co.uk>
>> Tested-by: Tushar Behera<tushar.b@samsung.com>
>>
>
> Mark Brown as already applied the SPI DT binding fix from Naveen [0] which was
> the dependency for this patch and he said that will try to send the whole series
> to Torvalds before the 3.16-rc cycle ends.
>
Thanks for your gentle reminder ;-)

> So I think that it's safe now if you want to pick this patch.
>
Sure, I've applied.

> Thanks a lot!
>
Many thanks.

- Kukjin

> Best regards,
> Javier
>
> [0]:
> https://git.kernel.org/cgit/linux/kernel/git/broonie/spi.git/commit/?h=for-next&id=306972cedfdedc662dd8e32a6397d0e29f2ac90e
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 7649982..b2f1237 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -25,6 +25,11 @@ 
 		"google,pit", "google,peach","samsung,exynos5420",
 		"samsung,exynos5";
 
+	aliases {
+		/* Assign 20 so we don't get confused w/ builtin ones */
+		i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel";
+	};
+
 	backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm 0 1000000 0>;
@@ -87,6 +92,13 @@ 
 		pinctrl-0 = <&usb301_vbus_en>;
 		enable-active-high;
 	};
+
+	vbat: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat-supply";
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &dp {
@@ -231,6 +243,20 @@ 
 		samsung,pin-drv = <0>;
 	};
 
+	ec_irq: ec-irq {
+		samsung,pins = "gpx1-5";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	tps65090_irq: tps65090-irq {
+		samsung,pins = "gpx2-5";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
 	dp_hpd_gpio: dp_hpd_gpio {
 		samsung,pins = "gpx2-6";
 		samsung,pin-function = <0>;
@@ -247,6 +273,19 @@ 
 };
 
 &pinctrl_3 {
+	/* Drive SPI lines at x2 for better integrity */
+	spi2-bus {
+		samsung,pin-drv = <2>;
+	};
+
+	/* Drive SPI chip select at x2 for better integrity */
+	ec_spi_cs: ec-spi-cs {
+		samsung,pins = "gpb1-2";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <2>;
+	};
+
 	usb300_vbus_en: usb300-vbus-en {
 		samsung,pins = "gph0-0";
 		samsung,pin-function = <1>;
@@ -266,6 +305,111 @@ 
 	status = "okay";
 };
 
+&spi_2 {
+	status = "okay";
+	num-cs = <1>;
+	samsung,spi-src-clk = <0>;
+	cs-gpios = <&gpb1 2 0>;
+
+	cros_ec: cros-ec@0 {
+		compatible = "google,cros-ec-spi";
+		interrupt-parent = <&gpx1>;
+		interrupts = <5 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_spi_cs &ec_irq>;
+		reg = <0>;
+		spi-max-frequency = <3125000>;
+
+		controller-data {
+			samsung,spi-feedback-delay = <1>;
+		};
+
+		i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			google,remote-bus = <0>;
+
+			battery: sbs-battery@b {
+				compatible = "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,poll-retry-count = <1>;
+				sbs,i2c-retry-count = <2>;
+			};
+
+			power-regulator@48 {
+				compatible = "ti,tps65090";
+				reg = <0x48>;
+
+				/*
+				 * Config irq to disable internal pulls
+				 * even though we run in polling mode.
+				 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&tps65090_irq>;
+
+				vsys1-supply = <&vbat>;
+				vsys2-supply = <&vbat>;
+				vsys3-supply = <&vbat>;
+				infet1-supply = <&vbat>;
+				infet2-supply = <&vbat>;
+				infet3-supply = <&vbat>;
+				infet4-supply = <&vbat>;
+				infet5-supply = <&vbat>;
+				infet6-supply = <&vbat>;
+				infet7-supply = <&vbat>;
+				vsys-l1-supply = <&vbat>;
+				vsys-l2-supply = <&vbat>;
+
+				regulators {
+					tps65090_dcdc1: dcdc1 {
+						ti,enable-ext-control;
+					};
+					tps65090_dcdc2: dcdc2 {
+						ti,enable-ext-control;
+					};
+					tps65090_dcdc3: dcdc3 {
+						ti,enable-ext-control;
+					};
+					tps65090_fet1: fet1 {
+						regulator-name = "vcd_led";
+					};
+					tps65090_fet2: fet2 {
+						regulator-name = "video_mid";
+						regulator-always-on;
+					};
+					tps65090_fet3: fet3 {
+						regulator-name = "wwan_r";
+						regulator-always-on;
+					};
+					tps65090_fet4: fet4 {
+						regulator-name = "sdcard";
+						regulator-always-on;
+					};
+					tps65090_fet5: fet5 {
+						regulator-name = "camout";
+					};
+					tps65090_fet6: fet6 {
+						regulator-name = "lcd_vdd";
+					};
+					tps65090_fet7: fet7 {
+						regulator-name = "video_mid_1a";
+						regulator-always-on;
+					};
+					tps65090_ldo1: ldo1 {
+					};
+					tps65090_ldo2: ldo2 {
+					};
+				};
+
+				charger {
+					compatible = "ti,tps65090-charger";
+				};
+			};
+		};
+	};
+};
+
 &uart_3 {
 	status = "okay";
 };
@@ -287,3 +431,4 @@ 
 	timeout-sec = <32>;
 };
 
+#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 2c2c137..5c60bbe 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -23,6 +23,11 @@ 
 		"google,pi", "google,peach", "samsung,exynos5800",
 		"samsung,exynos5";
 
+	aliases {
+		/* Assign 20 so we don't get confused w/ builtin ones */
+		i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel";
+	};
+
 	backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm 0 1000000 0>;
@@ -85,6 +90,13 @@ 
 		pinctrl-0 = <&usb301_vbus_en>;
 		enable-active-high;
 	};
+
+	vbat: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat-supply";
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &dp {
@@ -229,6 +241,20 @@ 
 		samsung,pin-drv = <0>;
 	};
 
+	ec_irq: ec-irq {
+		samsung,pins = "gpx1-5";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	tps65090_irq: tps65090-irq {
+		samsung,pins = "gpx2-5";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
 	dp_hpd_gpio: dp_hpd_gpio {
 		samsung,pins = "gpx2-6";
 		samsung,pin-function = <0>;
@@ -245,6 +271,19 @@ 
 };
 
 &pinctrl_3 {
+	/* Drive SPI lines at x2 for better integrity */
+	spi2-bus {
+		samsung,pin-drv = <2>;
+	};
+
+	/* Drive SPI chip select at x2 for better integrity */
+	ec_spi_cs: ec-spi-cs {
+		samsung,pins = "gpb1-2";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <2>;
+	};
+
 	usb300_vbus_en: usb300-vbus-en {
 		samsung,pins = "gph0-0";
 		samsung,pin-function = <1>;
@@ -264,6 +303,111 @@ 
 	status = "okay";
 };
 
+&spi_2 {
+	status = "okay";
+	num-cs = <1>;
+	samsung,spi-src-clk = <0>;
+	cs-gpios = <&gpb1 2 0>;
+
+	cros_ec: cros-ec@0 {
+		compatible = "google,cros-ec-spi";
+		interrupt-parent = <&gpx1>;
+		interrupts = <5 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_spi_cs &ec_irq>;
+		reg = <0>;
+		spi-max-frequency = <3125000>;
+
+		controller-data {
+			samsung,spi-feedback-delay = <1>;
+		};
+
+		i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			google,remote-bus = <0>;
+
+			battery: sbs-battery@b {
+				compatible = "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,poll-retry-count = <1>;
+				sbs,i2c-retry-count = <2>;
+			};
+
+			power-regulator@48 {
+				compatible = "ti,tps65090";
+				reg = <0x48>;
+
+				/*
+				 * Config irq to disable internal pulls
+				 * even though we run in polling mode.
+				 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&tps65090_irq>;
+
+				vsys1-supply = <&vbat>;
+				vsys2-supply = <&vbat>;
+				vsys3-supply = <&vbat>;
+				infet1-supply = <&vbat>;
+				infet2-supply = <&vbat>;
+				infet3-supply = <&vbat>;
+				infet4-supply = <&vbat>;
+				infet5-supply = <&vbat>;
+				infet6-supply = <&vbat>;
+				infet7-supply = <&vbat>;
+				vsys-l1-supply = <&vbat>;
+				vsys-l2-supply = <&vbat>;
+
+				regulators {
+					tps65090_dcdc1: dcdc1 {
+						ti,enable-ext-control;
+					};
+					tps65090_dcdc2: dcdc2 {
+						ti,enable-ext-control;
+					};
+					tps65090_dcdc3: dcdc3 {
+						ti,enable-ext-control;
+					};
+					tps65090_fet1: fet1 {
+						regulator-name = "vcd_led";
+					};
+					tps65090_fet2: fet2 {
+						regulator-name = "video_mid";
+						regulator-always-on;
+					};
+					tps65090_fet3: fet3 {
+						regulator-name = "wwan_r";
+						regulator-always-on;
+					};
+					tps65090_fet4: fet4 {
+						regulator-name = "sdcard";
+						regulator-always-on;
+					};
+					tps65090_fet5: fet5 {
+						regulator-name = "camout";
+					};
+					tps65090_fet6: fet6 {
+						regulator-name = "lcd_vdd";
+					};
+					tps65090_fet7: fet7 {
+						regulator-name = "video_mid_1a";
+						regulator-always-on;
+					};
+					tps65090_ldo1: ldo1 {
+					};
+					tps65090_ldo2: ldo2 {
+					};
+				};
+
+				charger {
+					compatible = "ti,tps65090-charger";
+				};
+			};
+		};
+	};
+};
+
 &uart_3 {
 	status = "okay";
 };
@@ -285,3 +429,4 @@ 
 	timeout-sec = <32>;
 };
 
+#include "cros-ec-keyboard.dtsi"