Message ID | 1402585745-28127-1-git-send-email-alban.bedel@avionic-design.de (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
On Thu, Jun 12, 2014 at 05:09:05PM +0200, Alban Bedel wrote: > This panel is used by the Medcom Wide and supported by the > simple-panel driver. > > Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de> > --- > drivers/gpu/drm/panel/panel-simple.c | 25 +++++++++++++++++++++++++ > 1 file changed, 25 insertions(+) > > diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c > index 309f29e..6a361bb 100644 > --- a/drivers/gpu/drm/panel/panel-simple.c > +++ b/drivers/gpu/drm/panel/panel-simple.c > @@ -372,6 +372,28 @@ static const struct panel_desc samsung_ltn101nt05 = { > }, > }; > > +static const struct drm_display_mode innolux_n156bge_l21_mode = { > + .clock = 69300, > + .hdisplay = 1366, > + .hsync_start = 1366, > + .hsync_end = 1366, > + .htotal = 1366 + 100, > + .vdisplay = 768, > + .vsync_start = 768, > + .vsync_end = 768, > + .vtotal = 768 + 20, The timings here look slightly strange. Typically .{h,v}display < .{h,v}sync_start < .{h,v}hsync_end < .{h,v}total Given your timings above essentially means that the vsync pulse starts immediately after the last active pixel or line and is of length zero. > + .vrefresh = 60, > +}; > + > +static const struct panel_desc innolux_n156bge_l21 = { > + .modes = &innolux_n156bge_l21_mode, > + .num_modes = 1, > + .size = { > + .width = 1366, > + .height = 768, This size is the physical size (in mm) of the active area of the panel. > + }, > +}; > + > static const struct of_device_id platform_of_match[] = { > { > .compatible = "auo,b101aw03", > @@ -389,6 +411,9 @@ static const struct of_device_id platform_of_match[] = { > .compatible = "samsung,ltn101nt05", > .data = &samsung_ltn101nt05, > }, { > + .compatible = "innolux,n156bge-l21", > + .data = &innolux_n156bge_l21, > + }, { This patch should also be adding a device tree binding document for this panel. Thierry
On Tue, Jul 22, 2014 at 08:38:55AM +0200, Alban Bedel wrote: > This panel is used by the Medcom Wide and supported by the > simple-panel driver. > > Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de> > --- > v2: * Added the v/hsync pulses for correctness (the panel doesn't > really needs them) > * Fixed the size to report the physical size in mm > --- > .../bindings/panel/innolux,n156bge-l21.txt | 7 ++++++ > drivers/gpu/drm/panel/panel-simple.c | 25 ++++++++++++++++++++++ > 2 files changed, 32 insertions(+) > create mode 100644 Documentation/devicetree/bindings/panel/innolux,n156bge-l21.txt Applied, thanks. I slightly reordered where the new panel was added, since they're sorted alphabetically by vendor, then device. Thierry
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 309f29e..6a361bb 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -372,6 +372,28 @@ static const struct panel_desc samsung_ltn101nt05 = { }, }; +static const struct drm_display_mode innolux_n156bge_l21_mode = { + .clock = 69300, + .hdisplay = 1366, + .hsync_start = 1366, + .hsync_end = 1366, + .htotal = 1366 + 100, + .vdisplay = 768, + .vsync_start = 768, + .vsync_end = 768, + .vtotal = 768 + 20, + .vrefresh = 60, +}; + +static const struct panel_desc innolux_n156bge_l21 = { + .modes = &innolux_n156bge_l21_mode, + .num_modes = 1, + .size = { + .width = 1366, + .height = 768, + }, +}; + static const struct of_device_id platform_of_match[] = { { .compatible = "auo,b101aw03", @@ -389,6 +411,9 @@ static const struct of_device_id platform_of_match[] = { .compatible = "samsung,ltn101nt05", .data = &samsung_ltn101nt05, }, { + .compatible = "innolux,n156bge-l21", + .data = &innolux_n156bge_l21, + }, { .compatible = "simple-panel", }, { /* sentinel */
This panel is used by the Medcom Wide and supported by the simple-panel driver. Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de> --- drivers/gpu/drm/panel/panel-simple.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+)