diff mbox

[1/1] ARM: dts: Add Peach Pit and Pi dts entry for atmel touchpad

Message ID 1407373713-26281-1-git-send-email-javier.martinez@collabora.co.uk (mailing list archive)
State New, archived
Headers show

Commit Message

Javier Martinez Canillas Aug. 7, 2014, 1:08 a.m. UTC
From: Sjoerd Simons <sjoerd.simons@collabora.co.uk>

The Peach Pit and Pi boards have an Atmel maXTouch device.
Add the needed Device Tree nodes to support it.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
[javier.martinez: added linux,gpio-keymap property and changed IRQ type]
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
---

With only this patch the touchpad is probed but interrupts are not being
generated. The following is needed to have a fully functional touchpad:

[PATCH 1/2] "Input: atmel_mxt_ts - Get IRQ edge/level flags on DT booting"
https://lkml.org/lkml/2014/8/6/585

 arch/arm/boot/dts/exynos5420-peach-pit.dts | 29 +++++++++++++++++++++++++++++
 arch/arm/boot/dts/exynos5800-peach-pi.dts  | 29 +++++++++++++++++++++++++++++
 2 files changed, 58 insertions(+)

Comments

Fabio Estevam Aug. 7, 2014, 1:35 a.m. UTC | #1
On Wed, Aug 6, 2014 at 10:08 PM, Javier Martinez Canillas
<javier.martinez@collabora.co.uk> wrote:

> +&hsi2c_8 {
> +       status = "okay";
> +       clock-frequency = <333000>;

Doesn't it work at the more standard 400kHz i2c frequency?
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Javier Martinez Canillas Aug. 7, 2014, 1:49 a.m. UTC | #2
Hello Fabio,

On 08/07/2014 03:35 AM, Fabio Estevam wrote:
> On Wed, Aug 6, 2014 at 10:08 PM, Javier Martinez Canillas
> <javier.martinez@collabora.co.uk> wrote:
> 
>> +&hsi2c_8 {
>> +       status = "okay";
>> +       clock-frequency = <333000>;
> 
> Doesn't it work at the more standard 400kHz i2c frequency?
> 

Most bits of this DTS snippet have been taken from the downstream Chrome OS 3.8
kernel so I'll let one of the Chromium folks to answer this question.

Best regards,
Javier
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Douglas Anderson Aug. 7, 2014, 2:18 a.m. UTC | #3
Fabio,

On Wed, Aug 6, 2014 at 6:35 PM, Fabio Estevam <festevam@gmail.com> wrote:
> On Wed, Aug 6, 2014 at 10:08 PM, Javier Martinez Canillas
> <javier.martinez@collabora.co.uk> wrote:
>
>> +&hsi2c_8 {
>> +       status = "okay";
>> +       clock-frequency = <333000>;
>
> Doesn't it work at the more standard 400kHz i2c frequency?

I'm pretty sure that they had signaling problems at 400kHz, but
perhaps Benson will rememer.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 228a6b1..7dce444 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -11,6 +11,7 @@ 
 /dts-v1/;
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include "exynos5420.dtsi"
 
 / {
@@ -157,6 +158,27 @@ 
 	};
 };
 
+&hsi2c_8 {
+	status = "okay";
+	clock-frequency = <333000>;
+
+	trackpad@4b {
+		compatible="atmel,maxtouch";
+		reg=<0x4b>;
+		interrupt-parent=<&gpx1>;
+		interrupts=<1 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_irq>;
+		linux,gpio-keymap = < BTN_LEFT
+				      BTN_TOOL_FINGER
+				      BTN_TOOL_DOUBLETAP
+				      BTN_TOOL_TRIPLETAP
+				      BTN_TOOL_QUADTAP
+				      BTN_TOOL_QUINTTAP >;
+	};
+};
+
 &hsi2c_9 {
 	status = "okay";
 	clock-frequency = <400000>;
@@ -249,6 +271,13 @@ 
 		samsung,pin-drv = <0>;
 	};
 
+	trackpad_irq: trackpad-irq {
+		samsung,pins = "gpx1-1";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
 	power_key_irq: power-key-irq {
 		samsung,pins = "gpx1-2";
 		samsung,pin-function = <0>;
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index f3ee48b..de946b3 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -11,6 +11,7 @@ 
 /dts-v1/;
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include "exynos5800.dtsi"
 
 / {
@@ -155,6 +156,27 @@ 
 	};
 };
 
+&hsi2c_8 {
+	status = "okay";
+	clock-frequency = <333000>;
+
+	trackpad@4b {
+		compatible="atmel,maxtouch";
+		reg=<0x4b>;
+		interrupt-parent=<&gpx1>;
+		interrupts=<1 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_irq>;
+		linux,gpio-keymap = < BTN_LEFT
+				      BTN_TOOL_FINGER
+				      BTN_TOOL_DOUBLETAP
+				      BTN_TOOL_TRIPLETAP
+				      BTN_TOOL_QUADTAP
+				      BTN_TOOL_QUINTTAP >;
+	};
+};
+
 &hsi2c_9 {
 	status = "okay";
 	clock-frequency = <400000>;
@@ -247,6 +269,13 @@ 
 		samsung,pin-drv = <0>;
 	};
 
+	trackpad_irq: trackpad-irq {
+		samsung,pins = "gpx1-1";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
 	power_key_irq: power-key-irq {
 		samsung,pins = "gpx1-2";
 		samsung,pin-function = <0>;