[00/12] QorIQ TMU multi-sensor and HWMON support
mbox series

Message ID 20190218191141.3729-1-andrew.smirnov@gmail.com
Headers show
Series
  • QorIQ TMU multi-sensor and HWMON support
Related show

Message

Andrey Smirnov Feb. 18, 2019, 7:11 p.m. UTC
Everyone:

This series contains patches adding support for HWMON integration,
multi-sensor support as well as a small fix and general improvements
(hopefully) for TMU driver I made while working on it on i.MX8MQ.

Feedback is welcome!

Thanks,
Andrey Smirnov

Andrey Smirnov (12):
  thermal_hwmon: Add devres wrapper for thermal_add_hwmon_sysfs()
  thermal: qoriq: Remove unnecessary DT node is NULL check
  thermal: qoriq: Add local struct device pointer in qoriq_tmu_probe()
  thermal: qoriq: Don't pass platform_device to qoriq_tmu_calibration()
  thermal: qoriq: Convert driver to use devm_ioremap()
  thermal: qoriq: Add hwmon support
  thermal: qoriq: Convert driver to use regmap API
  thermal: qoriq: Enable monitoring before querying temperature
  thermal: qoriq: Do not report invalid temperature reading
  thermal: qoriq: Simplify error handling in qoriq_tmu_get_sensor_id()
  thermal: qoriq: Be more strict when parsing "thermal-sensors"
  thermal: qoriq: Add support for multiple thremal sites

 drivers/thermal/qoriq_thermal.c | 326 ++++++++++++++++++--------------
 drivers/thermal/thermal_hwmon.c |  28 +++
 drivers/thermal/thermal_hwmon.h |   7 +
 3 files changed, 214 insertions(+), 147 deletions(-)

Comments

Eduardo Valentin Feb. 21, 2019, 12:52 a.m. UTC | #1
Hey Andrey

On Mon, Feb 18, 2019 at 11:11:29AM -0800, Andrey Smirnov wrote:
> Everyone:
> 
> This series contains patches adding support for HWMON integration,
> multi-sensor support as well as a small fix and general improvements
> (hopefully) for TMU driver I made while working on it on i.MX8MQ.
> 
> Feedback is welcome!

What branch is this patch series based off?

Would you mind re-sending the series based off my -linus branch?
There has been an addition on qoriq driver to support multiple sensors
and the code has shifted and your series does not apply over there.

> 
> Thanks,
> Andrey Smirnov
> 
> Andrey Smirnov (12):
>   thermal_hwmon: Add devres wrapper for thermal_add_hwmon_sysfs()
>   thermal: qoriq: Remove unnecessary DT node is NULL check
>   thermal: qoriq: Add local struct device pointer in qoriq_tmu_probe()
>   thermal: qoriq: Don't pass platform_device to qoriq_tmu_calibration()
>   thermal: qoriq: Convert driver to use devm_ioremap()
>   thermal: qoriq: Add hwmon support
>   thermal: qoriq: Convert driver to use regmap API
>   thermal: qoriq: Enable monitoring before querying temperature
>   thermal: qoriq: Do not report invalid temperature reading
>   thermal: qoriq: Simplify error handling in qoriq_tmu_get_sensor_id()
>   thermal: qoriq: Be more strict when parsing "thermal-sensors"
>   thermal: qoriq: Add support for multiple thremal sites
> 
>  drivers/thermal/qoriq_thermal.c | 326 ++++++++++++++++++--------------
>  drivers/thermal/thermal_hwmon.c |  28 +++
>  drivers/thermal/thermal_hwmon.h |   7 +
>  3 files changed, 214 insertions(+), 147 deletions(-)
> 
> -- 
> 2.20.1
>
Andrey Smirnov Feb. 21, 2019, 6:45 p.m. UTC | #2
On Wed, Feb 20, 2019 at 4:52 PM Eduardo Valentin <edubezval@gmail.com> wrote:
>
> Hey Andrey
>
> On Mon, Feb 18, 2019 at 11:11:29AM -0800, Andrey Smirnov wrote:
> > Everyone:
> >
> > This series contains patches adding support for HWMON integration,
> > multi-sensor support as well as a small fix and general improvements
> > (hopefully) for TMU driver I made while working on it on i.MX8MQ.
> >
> > Feedback is welcome!
>
> What branch is this patch series based off?
>

This was based on  v5.0-rc6

> Would you mind re-sending the series based off my -linus branch?
> There has been an addition on qoriq driver to support multiple sensors
> and the code has shifted and your series does not apply over there.
>

Sure, will do in v2.

Thanks,
Andrey Smirnov