mbox series

[RFC,V2,0/2] media: add support for OV02A10 sensor

Message ID 20190704084651.3105-1-dongchun.zhu@mediatek.com (mailing list archive)
Headers show
Series media: add support for OV02A10 sensor | expand

Message

Dongchun Zhu July 4, 2019, 8:46 a.m. UTC 
From: Dongchun Zhu <dongchun.zhu@mediatek.com>

Hello,

This patch adds driver and bindings for Omnivision's OV02A10 2 megapixel CMOS 1/5" sensor,
which has a single MIPI lane interface and output format of 10-bit Raw.

The driver is implemented wth V4L2 framework.
1. Async registered as a V4L2 I2C sub-device.
2. A media entity that can provide several source pads and sink pads to link with other device like Seninf, ISP one after another
   to create a default overall camera topology, image frame or meta-data from sensor can flow through particular path to output
   preview or capture image or 3A info.

Mainly changes of v2 are addressing the comments from Nicolas, Bingbu, Sakari, Rob,
including,
 - Put dt binding before driver in series
 - Add MAINTAINERS entries
 - Squash the MAINTAINERS entry and Kconfig to driver patch
 - Add rotation support for driver
 - Fix other reviewed issues in v1

Dongchun Zhu (2):
  media: dt-bindings: media: i2c: Add bindings for OV02A10
  media: i2c: Add Omnivision OV02A10 camera sensor driver

 .../devicetree/bindings/media/i2c/ov02a10.txt      |   43 +
 MAINTAINERS                                        |    8 +
 drivers/media/i2c/Kconfig                          |   12 +
 drivers/media/i2c/Makefile                         |    1 +
 drivers/media/i2c/ov02a10.c                        | 1017 ++++++++++++++++++++
 5 files changed, 1081 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/ov02a10.txt
 create mode 100644 drivers/media/i2c/ov02a10.c