[v5,0/2] Add basic support for pico-pi-imx8m
mbox series

Message ID 20190719121430.9318-1-andradanciu1997@gmail.com
Headers show
  • Add basic support for pico-pi-imx8m
Related show


Andra Danciu July 19, 2019, 12:14 p.m. UTC
Add support for TechNexion PICO-PI-IMX8M based on patches from Richard Hu
Datasheet is at: https://s3.us-east-2.amazonaws.com/technexion/datasheets/picopiimx8m.pdf

Changes since v4:
 - removed #address-cells and  #size-cells from regulators node

Changes since v3:
 - renamed pico-pi-8m.dts to imx8mq-pico-pi.dts
 - moved iomuxc node as the last one
 - removed pinctrl-assert-gpios property from fec1 node
 - removed at803x,led-act-blind-workaround, at803x,eee-disabled
   properties from mdio node
 - added pinctrl-names = "default" to i2c1 node
 - changed bd71837 pmic support properties according to
 - removed A53_0 node

Changes since v2:
 - changed PICO-PI-8M bord compatible from wand,imx8mq-pico-pi to
 - removed bootargs property
 - removed regulators node and put fixed regulator directly under root node
 - changed node name from usb_otg_vbus to regulator-usb-otg-vbus
 - removed pinctrl-names property from iomuxc node
 - removed wand-pi-8m container node
 - sorted pinctrl nodes alphabetically
 - removed tusb320_irqgrp, tusb320_irqgrp nodes because there is no upstream
 - changed properties' order in usb_dwc3_1 node

Changes since v1:
 - renamed wandboard-pi-8m.dts to pico-pi-8m.dts
 - removed pinctrl_csi1, pinctrl_wifi_ctrl
 - used generic name for pmic
 - removed gpo node
 - delete regulator-virtuals node
 - remove always-on property from buck1-8 and ldo3-7
 - remove pmic-buck-uses-i2c-dvs property for buck1-4

Andra Danciu (1):
  dt-bindings: arm: fsl: Add the pico-pi-imx8m board

Richard Hu (1):
  arm64: dts: fsl: pico-pi: Add a device tree for the PICO-PI-IMX8M

 Documentation/devicetree/bindings/arm/fsl.yaml   |   1 +
 arch/arm64/boot/dts/freescale/Makefile           |   1 +
 arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts | 414 +++++++++++++++++++++++
 3 files changed, 416 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts