[0/7] Add definition for the number of standard PCI BARs
mbox series

Message ID 20190811150802.2418-1-efremov@linux.com
Headers show
Series
  • Add definition for the number of standard PCI BARs
Related show

Message

Denis Efremov Aug. 11, 2019, 3:07 p.m. UTC
Code that iterates over all standard PCI BARs typically uses
PCI_STD_RESOURCE_END, but this is error-prone because it requires
"i <= PCI_STD_RESOURCE_END" rather than something like
"i < PCI_STD_NUM_BARS". We could add such a definition and use it the same
way PCI_SRIOV_NUM_BARS is used. There is already the definition
PCI_BAR_COUNT for s390 only. Thus, this patchset introduces it globally.

The patch is splitted into 7 parts for different drivers/subsystems for
easy readability.

Denis Efremov (7):
  PCI: Add define for the number of standard PCI BARs
  s390/pci: Replace PCI_BAR_COUNT with PCI_STD_NUM_BARS
  x86/PCI: Use PCI_STD_NUM_BARS in loops instead of PCI_STD_RESOURCE_END
  PCI/net: Use PCI_STD_NUM_BARS in loops instead of PCI_STD_RESOURCE_END
  rapidio/tsi721: use PCI_STD_NUM_BARS in loops instead of
    PCI_STD_RESOURCE_END
  efifb: Use PCI_STD_NUM_BARS in loops instead of PCI_STD_RESOURCE_END
  vfio_pci: Use PCI_STD_NUM_BARS in loops instead of
    PCI_STD_RESOURCE_END

 arch/s390/include/asm/pci.h                      |  5 +----
 arch/s390/include/asm/pci_clp.h                  |  6 +++---
 arch/s390/pci/pci.c                              | 16 ++++++++--------
 arch/s390/pci/pci_clp.c                          |  6 +++---
 arch/x86/pci/common.c                            |  2 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c |  4 ++--
 drivers/net/ethernet/synopsys/dwc-xlgmac-pci.c   |  2 +-
 drivers/pci/quirks.c                             |  2 +-
 drivers/rapidio/devices/tsi721.c                 |  2 +-
 drivers/vfio/pci/vfio_pci.c                      |  4 ++--
 drivers/vfio/pci/vfio_pci_config.c               |  2 +-
 drivers/vfio/pci/vfio_pci_private.h              |  4 ++--
 drivers/video/fbdev/efifb.c                      |  2 +-
 include/linux/pci.h                              |  2 +-
 include/uapi/linux/pci_regs.h                    |  1 +
 15 files changed, 29 insertions(+), 31 deletions(-)

Comments

Andrew Murray Aug. 12, 2019, 9:06 a.m. UTC | #1
On Sun, Aug 11, 2019 at 06:07:55PM +0300, Denis Efremov wrote:
> Code that iterates over all standard PCI BARs typically uses
> PCI_STD_RESOURCE_END, but this is error-prone because it requires
> "i <= PCI_STD_RESOURCE_END" rather than something like
> "i < PCI_STD_NUM_BARS". We could add such a definition and use it the same
> way PCI_SRIOV_NUM_BARS is used. There is already the definition
> PCI_BAR_COUNT for s390 only. Thus, this patchset introduces it globally.
> 
> The patch is splitted into 7 parts for different drivers/subsystems for
> easy readability.
> 
> Denis Efremov (7):
>   PCI: Add define for the number of standard PCI BARs
>   s390/pci: Replace PCI_BAR_COUNT with PCI_STD_NUM_BARS
>   x86/PCI: Use PCI_STD_NUM_BARS in loops instead of PCI_STD_RESOURCE_END
>   PCI/net: Use PCI_STD_NUM_BARS in loops instead of PCI_STD_RESOURCE_END
>   rapidio/tsi721: use PCI_STD_NUM_BARS in loops instead of
>     PCI_STD_RESOURCE_END
>   efifb: Use PCI_STD_NUM_BARS in loops instead of PCI_STD_RESOURCE_END
>   vfio_pci: Use PCI_STD_NUM_BARS in loops instead of
>     PCI_STD_RESOURCE_END
> 
>  arch/s390/include/asm/pci.h                      |  5 +----
>  arch/s390/include/asm/pci_clp.h                  |  6 +++---
>  arch/s390/pci/pci.c                              | 16 ++++++++--------
>  arch/s390/pci/pci_clp.c                          |  6 +++---
>  arch/x86/pci/common.c                            |  2 +-
>  drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c |  4 ++--
>  drivers/net/ethernet/synopsys/dwc-xlgmac-pci.c   |  2 +-
>  drivers/pci/quirks.c                             |  2 +-
>  drivers/rapidio/devices/tsi721.c                 |  2 +-
>  drivers/vfio/pci/vfio_pci.c                      |  4 ++--
>  drivers/vfio/pci/vfio_pci_config.c               |  2 +-
>  drivers/vfio/pci/vfio_pci_private.h              |  4 ++--
>  drivers/video/fbdev/efifb.c                      |  2 +-
>  include/linux/pci.h                              |  2 +-
>  include/uapi/linux/pci_regs.h                    |  1 +

Hi Denis,

You could also fix up a few cases where the number of BARs is hard coded in
loops, e.g.

drivers/pci/controller/pci-hyperv.c - look for uses of probed_bar in loops
drivers/pci/pci.c - pci_release_selected_regions and __pci_request_selected_regions
drivers/pci/quirks.c - quirk_alder_ioapic

Thanks,

Andrew Murray

>  15 files changed, 29 insertions(+), 31 deletions(-)
> 
> -- 
> 2.21.0
>
Bjorn Helgaas Aug. 12, 2019, 8:01 p.m. UTC | #2
On Sun, Aug 11, 2019 at 06:07:55PM +0300, Denis Efremov wrote:
> Code that iterates over all standard PCI BARs typically uses
> PCI_STD_RESOURCE_END, but this is error-prone because it requires
> "i <= PCI_STD_RESOURCE_END" rather than something like
> "i < PCI_STD_NUM_BARS". We could add such a definition and use it the same
> way PCI_SRIOV_NUM_BARS is used. There is already the definition
> PCI_BAR_COUNT for s390 only. Thus, this patchset introduces it globally.
> 
> The patch is splitted into 7 parts for different drivers/subsystems for
> easy readability.

This looks good.  I can take all these together, since they all depend
on the first patch.  I have a few comments on the individual patches.

> Denis Efremov (7):
>   PCI: Add define for the number of standard PCI BARs
>   s390/pci: Replace PCI_BAR_COUNT with PCI_STD_NUM_BARS
>   x86/PCI: Use PCI_STD_NUM_BARS in loops instead of PCI_STD_RESOURCE_END
>   PCI/net: Use PCI_STD_NUM_BARS in loops instead of PCI_STD_RESOURCE_END
>   rapidio/tsi721: use PCI_STD_NUM_BARS in loops instead of
>     PCI_STD_RESOURCE_END
>   efifb: Use PCI_STD_NUM_BARS in loops instead of PCI_STD_RESOURCE_END
>   vfio_pci: Use PCI_STD_NUM_BARS in loops instead of
>     PCI_STD_RESOURCE_END
> 
>  arch/s390/include/asm/pci.h                      |  5 +----
>  arch/s390/include/asm/pci_clp.h                  |  6 +++---
>  arch/s390/pci/pci.c                              | 16 ++++++++--------
>  arch/s390/pci/pci_clp.c                          |  6 +++---
>  arch/x86/pci/common.c                            |  2 +-
>  drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c |  4 ++--
>  drivers/net/ethernet/synopsys/dwc-xlgmac-pci.c   |  2 +-
>  drivers/pci/quirks.c                             |  2 +-
>  drivers/rapidio/devices/tsi721.c                 |  2 +-
>  drivers/vfio/pci/vfio_pci.c                      |  4 ++--
>  drivers/vfio/pci/vfio_pci_config.c               |  2 +-
>  drivers/vfio/pci/vfio_pci_private.h              |  4 ++--
>  drivers/video/fbdev/efifb.c                      |  2 +-
>  include/linux/pci.h                              |  2 +-
>  include/uapi/linux/pci_regs.h                    |  1 +
>  15 files changed, 29 insertions(+), 31 deletions(-)
> 
> -- 
> 2.21.0
>
Thomas Gleixner Aug. 12, 2019, 8:11 p.m. UTC | #3
On Mon, 12 Aug 2019, Bjorn Helgaas wrote:

> On Sun, Aug 11, 2019 at 06:07:55PM +0300, Denis Efremov wrote:
> > Code that iterates over all standard PCI BARs typically uses
> > PCI_STD_RESOURCE_END, but this is error-prone because it requires
> > "i <= PCI_STD_RESOURCE_END" rather than something like
> > "i < PCI_STD_NUM_BARS". We could add such a definition and use it the same
> > way PCI_SRIOV_NUM_BARS is used. There is already the definition
> > PCI_BAR_COUNT for s390 only. Thus, this patchset introduces it globally.
> > 
> > The patch is splitted into 7 parts for different drivers/subsystems for
> > easy readability.
> 
> This looks good.  I can take all these together, since they all depend
> on the first patch.  I have a few comments on the individual patches.
> 
> > Denis Efremov (7):
> >   PCI: Add define for the number of standard PCI BARs
> >   s390/pci: Replace PCI_BAR_COUNT with PCI_STD_NUM_BARS
> >   x86/PCI: Use PCI_STD_NUM_BARS in loops instead of PCI_STD_RESOURCE_END

Fine with me for the x86 part. That's your turf anyway :)

Thanks,

	tglx
Denis Efremov Aug. 12, 2019, 9 p.m. UTC | #4
On 12.08.2019 12:06, Andrew Murray wrote:
> 
> Hi Denis,

Hi!

> 
> You could also fix up a few cases where the number of BARs is hard coded in
> loops, e.g.
> 
> drivers/pci/controller/pci-hyperv.c - look for uses of probed_bar in loops
> drivers/pci/pci.c - pci_release_selected_regions and __pci_request_selected_regions
> drivers/pci/quirks.c - quirk_alder_ioapic
> 

Thanks for pointing me on that. I will take this into account in v2.

Denis