[0/3] Add support for ADC on stm32mp157a-dk1
mbox series

Message ID 1568385280-2633-1-git-send-email-fabrice.gasnier@st.com
Headers show
Series
  • Add support for ADC on stm32mp157a-dk1
Related show

Message

Fabrice Gasnier Sept. 13, 2019, 2:34 p.m. UTC
This series adds support for ADC on stm32mp157a-dk1 board:
- enable vrefbuf regulator used as reference voltage
- define ADC pins for AIN connector and USB Type-C CC pins
- configure ADC1 and ADC2 to use these

Fabrice Gasnier (3):
  ARM: dts: stm32: Enable VREFBUF on stm32mp157a-dk1
  ARM: dts: stm32: add ADC pins used on stm32mp157a-dk1
  ARM: dts: stm32: enable ADC support on stm32mp157a-dk1

 arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 16 +++++++++++++++
 arch/arm/boot/dts/stm32mp157a-dk1.dts     | 34 +++++++++++++++++++++++++++++++
 2 files changed, 50 insertions(+)

Comments

Alexandre Torgue Oct. 3, 2019, 10:08 a.m. UTC | #1
Hi Fabrice

On 9/13/19 4:34 PM, Fabrice Gasnier wrote:
> This series adds support for ADC on stm32mp157a-dk1 board:
> - enable vrefbuf regulator used as reference voltage
> - define ADC pins for AIN connector and USB Type-C CC pins
> - configure ADC1 and ADC2 to use these
> 
> Fabrice Gasnier (3):
>    ARM: dts: stm32: Enable VREFBUF on stm32mp157a-dk1
>    ARM: dts: stm32: add ADC pins used on stm32mp157a-dk1
>    ARM: dts: stm32: enable ADC support on stm32mp157a-dk1
> 
>   arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 16 +++++++++++++++
>   arch/arm/boot/dts/stm32mp157a-dk1.dts     | 34 +++++++++++++++++++++++++++++++
>   2 files changed, 50 insertions(+)
> 

Series applied on stm32-next.

Regards
Alex