[v2,00/11] arm64: Realtek RTD1295 reset controllers

Message

Andreas Färber Oct. 23, 2019, 10:13 a.m. UTC

Hello,

This series adds reset controllers for the Realtek RTD1295 and RTD1195 SoCs.

v2 adopts reset-simple driver and DesignWare bindings as simplification
and covers RTD1195, too.

Note that reset-simple driver would allow to cover RTD1195's reset1-3 in one
DT node, but it only maps the first resource, so RTD1295's reset4 would need
to remain separate due to a gap in between. I've therefore left them all as
separate nodes for now.

Also note that my initial 32-bit arm patch already selects RESET_CONTROLLER,
to avoid needing a separate patch here to add that one line as done for arm64.

If I can take the bindings patches through the Realtek tree then I can squash
the two final DT patches depending on them into the patches added the resets,
otherwise they need to go into v5.6 or be merged via a topic branch.

More experimental patches at:
https://github.com/afaerber/linux/commits/rtd1295-next

Have a lot of fun!

Cheers,
Andreas

v1 -> v2:
* Drop custom reset driver
* Drop "realtek,rtd1295-reset" binding
* Reordered to not depend on irqchip or clk patches
* Extended with RTD1195 patches

Cc: Philipp Zabel <[e-mail]>
Cc: [e-mail]

Andreas Färber (11):
  dt-bindings: reset: Add Realtek RTD1295
  dt-bindings: reset: Add Realtek RTD1195
  reset: simple: Keep alphabetical order
  reset: simple: Add Realtek RTD1195/RTD1295
  arm64: realtek: Select reset controller
  arm64: dts: realtek: Add RTD129x reset controller nodes
  arm64: dts: realtek: Add RTD129x UART resets
  ARM: dts: rtd1195: Add reset nodes
  ARM: dts: rtd1195: Add UART resets
  arm64: dts: realtek: Adopt RTD129x reset constants
  ARM: dts: rtd1195: Adopt reset constants

 arch/arm/boot/dts/rtd1195.dtsi              |  27 +++++++
 arch/arm64/Kconfig.platforms                |   1 +
 arch/arm64/boot/dts/realtek/rtd129x.dtsi    |  34 +++++++++
 drivers/reset/Kconfig                       |   5 +-
 include/dt-bindings/reset/realtek,rtd1195.h |  74 +++++++++++++++++++
 include/dt-bindings/reset/realtek,rtd1295.h | 111 ++++++++++++++++++++++++++++
 6 files changed, 250 insertions(+), 2 deletions(-)
 create mode 100644 include/dt-bindings/reset/realtek,rtd1195.h
 create mode 100644 include/dt-bindings/reset/realtek,rtd1295.h

Comments

Philipp Zabel Oct. 24, 2019, 8:06 a.m. UTC | #1

Hi Andreas,

On Wed, 2019-10-23 at 12:13 +0200, Andreas Färber wrote:
> Hello,
> 
> This series adds reset controllers for the Realtek RTD1295 and RTD1195 SoCs.
> 
> v2 adopts reset-simple driver and DesignWare bindings as simplification
> and covers RTD1195, too.
> 
> Note that reset-simple driver would allow to cover RTD1195's reset1-3 in one
> DT node, but it only maps the first resource, so RTD1295's reset4 would need
> to remain separate due to a gap in between. I've therefore left them all as
> separate nodes for now.
> 
> Also note that my initial 32-bit arm patch already selects RESET_CONTROLLER,
> to avoid needing a separate patch here to add that one line as done for arm64.
> 
> If I can take the bindings patches through the Realtek tree then I can squash
> the two final DT patches depending on them into the patches added the resets,
> otherwise they need to go into v5.6 or be merged via a topic branch.

I'm fine with the DT binding patches going in through the Realtek tree,
feel free to add

Acked-by: Philipp Zabel <[e-mail]>

to both. I'll just pick up patches 3 and 4.

regards
Philipp