mbox series

[v2,0/6] Raspberry Pi 4 PCIe support

Message ID 20191112155926.16476-1-nsaenzjulienne@suse.de (mailing list archive)
Headers show
Series Raspberry Pi 4 PCIe support | expand

Message

Nicolas Saenz Julienne Nov. 12, 2019, 3:59 p.m. UTC
This series aims at providing support for Raspberry Pi 4's PCIe
controller, which is also shared with the Broadcom STB family of
devices.

There was a previous attempt to upstream this some years ago[1] but was
blocked as most STB PCIe integrations have a sparse DMA mapping[2] which
is something currently not supported by the kernel.  Luckily this is not
the case for the Raspberry Pi 4.

Note that the driver code is to be based on top of Rob Herring's series
simplifying inbound and outbound range parsing.

[1] https://patchwork.kernel.org/cover/10605933/
[2] https://patchwork.kernel.org/patch/10605957/

---

Changes since v1:
  - add generic rounddown/roundup_pow_two64() patch
  - Add MAINTAINERS patch
  - Fix Kconfig
  - Cleanup probe, use up to date APIs, exit on MSI failure
  - Get rid of linux,pci-domain and other unused constructs
  - Use edge triggered setup for MSI
  - Cleanup MSI implementation
  - Fix multiple cosmetic issues
  - Remove supend/resume code

Jim Quinlan (3):
  dt-bindings: PCI: Add bindings for brcmstb's PCIe device
  PCI: brcmstb: add Broadcom STB PCIe host controller driver
  PCI: brcmstb: add MSI capability

Nicolas Saenz Julienne (3):
  linux/log2.h: Add roundup/rounddown_pow_two64() family of functions
  ARM: dts: bcm2711: Enable PCIe controller
  MAINTAINERS: Add brcmstb PCIe controller

 .../bindings/pci/brcm,stb-pcie.yaml           |  110 ++
 MAINTAINERS                                   |    4 +
 arch/arm/boot/dts/bcm2711.dtsi                |   46 +
 drivers/net/ethernet/mellanox/mlx4/en_clock.c |    3 +-
 drivers/pci/controller/Kconfig                |    9 +
 drivers/pci/controller/Makefile               |    1 +
 drivers/pci/controller/pcie-brcmstb.c         | 1179 +++++++++++++++++
 drivers/pci/controller/pcie-cadence-ep.c      |    7 +-
 drivers/pci/controller/pcie-cadence.c         |    7 +-
 drivers/pci/controller/pcie-rockchip-ep.c     |    9 +-
 include/linux/log2.h                          |   52 +
 kernel/dma/direct.c                           |    3 +-
 12 files changed, 1412 insertions(+), 18 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
 create mode 100644 drivers/pci/controller/pcie-brcmstb.c

Comments

Andrew Murray Nov. 19, 2019, 11:18 a.m. UTC | #1
On Tue, Nov 12, 2019 at 04:59:19PM +0100, Nicolas Saenz Julienne wrote:
> This series aims at providing support for Raspberry Pi 4's PCIe
> controller, which is also shared with the Broadcom STB family of
> devices.
> 
> There was a previous attempt to upstream this some years ago[1] but was
> blocked as most STB PCIe integrations have a sparse DMA mapping[2] which
> is something currently not supported by the kernel.  Luckily this is not
> the case for the Raspberry Pi 4.
> 
> Note that the driver code is to be based on top of Rob Herring's series
> simplifying inbound and outbound range parsing.
> 
> [1] https://patchwork.kernel.org/cover/10605933/
> [2] https://patchwork.kernel.org/patch/10605957/
> 

What happened to patch 3? I can't see it on the list or in patchwork?

Thanks,

Andrew Murray

> ---
> 
> Changes since v1:
>   - add generic rounddown/roundup_pow_two64() patch
>   - Add MAINTAINERS patch
>   - Fix Kconfig
>   - Cleanup probe, use up to date APIs, exit on MSI failure
>   - Get rid of linux,pci-domain and other unused constructs
>   - Use edge triggered setup for MSI
>   - Cleanup MSI implementation
>   - Fix multiple cosmetic issues
>   - Remove supend/resume code
> 
> Jim Quinlan (3):
>   dt-bindings: PCI: Add bindings for brcmstb's PCIe device
>   PCI: brcmstb: add Broadcom STB PCIe host controller driver
>   PCI: brcmstb: add MSI capability
> 
> Nicolas Saenz Julienne (3):
>   linux/log2.h: Add roundup/rounddown_pow_two64() family of functions
>   ARM: dts: bcm2711: Enable PCIe controller
>   MAINTAINERS: Add brcmstb PCIe controller
> 
>  .../bindings/pci/brcm,stb-pcie.yaml           |  110 ++
>  MAINTAINERS                                   |    4 +
>  arch/arm/boot/dts/bcm2711.dtsi                |   46 +
>  drivers/net/ethernet/mellanox/mlx4/en_clock.c |    3 +-
>  drivers/pci/controller/Kconfig                |    9 +
>  drivers/pci/controller/Makefile               |    1 +
>  drivers/pci/controller/pcie-brcmstb.c         | 1179 +++++++++++++++++
>  drivers/pci/controller/pcie-cadence-ep.c      |    7 +-
>  drivers/pci/controller/pcie-cadence.c         |    7 +-
>  drivers/pci/controller/pcie-rockchip-ep.c     |    9 +-
>  include/linux/log2.h                          |   52 +
>  kernel/dma/direct.c                           |    3 +-
>  12 files changed, 1412 insertions(+), 18 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
>  create mode 100644 drivers/pci/controller/pcie-brcmstb.c
> 
> -- 
> 2.24.0
>
Nicolas Saenz Julienne Nov. 19, 2019, 11:49 a.m. UTC | #2
On Tue, 2019-11-19 at 11:18 +0000, Andrew Murray wrote:
> On Tue, Nov 12, 2019 at 04:59:19PM +0100, Nicolas Saenz Julienne wrote:
> > This series aims at providing support for Raspberry Pi 4's PCIe
> > controller, which is also shared with the Broadcom STB family of
> > devices.
> > 
> > There was a previous attempt to upstream this some years ago[1] but was
> > blocked as most STB PCIe integrations have a sparse DMA mapping[2] which
> > is something currently not supported by the kernel.  Luckily this is not
> > the case for the Raspberry Pi 4.
> > 
> > Note that the driver code is to be based on top of Rob Herring's series
> > simplifying inbound and outbound range parsing.
> > 
> > [1] https://patchwork.kernel.org/cover/10605933/
> > [2] https://patchwork.kernel.org/patch/10605957/
> > 
> 
> What happened to patch 3? I can't see it on the list or in patchwork?

For some reason the script I use to call get_maintainer.sh or git send-mail
failed to add linux-pci@vger.kernel.org and linux-kernel@vger.kernel.org as
recipients. I didn't do anything different between v1 and v2 as far as mailing
is concerned.

Nevertheless it's here: https://www.spinics.net/lists/arm-kernel/msg768461.html
and should be present in the linux-arm-kernel list.

I'll look in to it and make sure this doesn't happen in v3.

Regards,
Nicolas
Andrew Murray Nov. 21, 2019, 12:18 p.m. UTC | #3
On Tue, Nov 19, 2019 at 12:49:24PM +0100, Nicolas Saenz Julienne wrote:
> On Tue, 2019-11-19 at 11:18 +0000, Andrew Murray wrote:
> > On Tue, Nov 12, 2019 at 04:59:19PM +0100, Nicolas Saenz Julienne wrote:
> > > This series aims at providing support for Raspberry Pi 4's PCIe
> > > controller, which is also shared with the Broadcom STB family of
> > > devices.
> > > 
> > > There was a previous attempt to upstream this some years ago[1] but was
> > > blocked as most STB PCIe integrations have a sparse DMA mapping[2] which
> > > is something currently not supported by the kernel.  Luckily this is not
> > > the case for the Raspberry Pi 4.
> > > 
> > > Note that the driver code is to be based on top of Rob Herring's series
> > > simplifying inbound and outbound range parsing.
> > > 
> > > [1] https://patchwork.kernel.org/cover/10605933/
> > > [2] https://patchwork.kernel.org/patch/10605957/
> > > 
> > 
> > What happened to patch 3? I can't see it on the list or in patchwork?
> 
> For some reason the script I use to call get_maintainer.sh or git send-mail
> failed to add linux-pci@vger.kernel.org and linux-kernel@vger.kernel.org as
> recipients. I didn't do anything different between v1 and v2 as far as mailing
> is concerned.
> 
> Nevertheless it's here: https://www.spinics.net/lists/arm-kernel/msg768461.html
> and should be present in the linux-arm-kernel list.
> 
> I'll look in to it and make sure this doesn't happen in v3.

No problem.

Thanks,

Andrew Murray

> 
> Regards,
> Nicolas
>