mbox series

[v1,0/2] Add suppport for rm69299 Visionox panel driver and add devicetree bindings for visionox panel.

Message ID 1575010545-25971-1-git-send-email-harigovi@codeaurora.org (mailing list archive)
Headers show
Series Add suppport for rm69299 Visionox panel driver and add devicetree bindings for visionox panel. | expand

Message

Harigovindan P Nov. 29, 2019, 6:55 a.m. UTC 
Current patchset adds support for rm69299 visionox panel driver used in MSM reference platforms.
The visionox panel driver supports a resolution of 1080x2248 with 4 lanes and supports only single DSI mode.

Current patchset is tested on actual panel.

Changes in v1:
	-add devicetree bindings for visionox panel.
	-Split out panel driver patch from dsi config changes(Rob Clark).
        -Remove unrelated code(Stephen Boyd).
        -Remove static arrays to make regulator setup
         open coded in probe(Stephen Boyd).
        -Remove pre-assigning variables(Stephen Boyd).
        -Inline panel_add function into probe(Stephen Boyd).
        -Use mipi_dsi_dcs_write directly(Rob Clark).
	-Remove qcom_rm69299_1080p_panel_magic_cmds array(Rob Clark).

Harigovindan P (2):
  dt-bindings: display: add sc7180 panel variant
  drm/panel: add support for rm69299 visionox panel driver

 .../bindings/display/visionox,rm69299.txt          |  68 ++++
 drivers/gpu/drm/panel/Kconfig                      |   9 +
 drivers/gpu/drm/panel/Makefile                     |   1 +
 drivers/gpu/drm/panel/panel-visionox-rm69299.c     | 412 +++++++++++++++++++++
 4 files changed, 490 insertions(+)
 create mode 100755 Documentation/devicetree/bindings/display/visionox,rm69299.txt
 create mode 100755 drivers/gpu/drm/panel/panel-visionox-rm69299.c