[v4,00/10] ARM: dts: dra7: add cal nodes
mbox series

Message ID 20191211140558.10407-1-bparrot@ti.com
Headers show
Series
  • ARM: dts: dra7: add cal nodes
Related show

Message

Benoit Parrot Dec. 11, 2019, 2:05 p.m. UTC
This patch series adds the needed clkctrl and ty-sysc nodes for CAL module.
It also adds support for the module in related dtsi and dts for DRA72,
DRA76 and AM654 SoC.

Changes since v3:
- Added Tony's ack
- Added Rob's ack
- In all 3 .dts patch removed unneeded cal 'status = "ok"' lines 

Changes since v2:
- Add non-standard clock node naming to commit message as per Tony's
  comment

Changes since v1:
- Fix clock name to make it generic
- Updated the binding to use ti,camerrx-control instead of sycon_camerrx
- Split off the clk code into its own patch
- Add clk mailing list as requested

Benoit Parrot (10):
  clk: ti: dra7: add cam clkctrl data
  ARM: dts: dra7: add cam clkctrl node
  ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only
  ARM: dts: dra7-l4: Add ti-sysc node for CAM
  ARM: dts: DRA72: Add CAL dtsi node
  arm: dts: dra72-evm-common: Add entries for the CSI2 cameras
  arm: dtsi: dra76x: Add CAL dtsi node
  arm: dts: dra76-evm: Add CAL and OV5640 nodes
  arm64: dts: k3-am65-main Add CAL node
  arm64: dts: k3-am654-base-board: Add CSI2 OV5640 camera

 arch/arm/boot/dts/dra7-l4.dtsi                | 43 ++++++++++++++++---
 arch/arm/boot/dts/dra72-evm-common.dtsi       | 31 +++++++++++++
 arch/arm/boot/dts/dra72x.dtsi                 | 42 ++++++++++++++++++
 arch/arm/boot/dts/dra76-evm.dts               | 35 +++++++++++++++
 arch/arm/boot/dts/dra76x.dtsi                 | 42 ++++++++++++++++++
 arch/arm/boot/dts/dra7xx-clocks.dtsi          | 14 ++++++
 arch/arm/mach-omap2/clockdomains7xx_data.c    |  2 +-
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi      | 22 ++++++++++
 .../arm64/boot/dts/ti/k3-am654-base-board.dts | 32 ++++++++++++++
 drivers/clk/ti/clk-7xx.c                      | 19 ++++++++
 include/dt-bindings/clock/dra7.h              | 10 +++++
 11 files changed, 285 insertions(+), 7 deletions(-)

Comments

Tony Lindgren Jan. 23, 2020, 5:17 p.m. UTC | #1
* Benoit Parrot <bparrot@ti.com> [191211 06:03]:
> This patch series adds the needed clkctrl and ty-sysc nodes for CAL module.
> It also adds support for the module in related dtsi and dts for DRA72,
> DRA76 and AM654 SoC.

Applying these into omap-for-v5.6/ti-sysc-dt-cam on top of Tero's
for-5.6-ti-clk branch. It might be too later for v5.6, but we'll
see.

Regards,

Tony
Tony Lindgren Jan. 23, 2020, 5:26 p.m. UTC | #2
* Tony Lindgren <tony@atomide.com> [200123 17:18]:
> * Benoit Parrot <bparrot@ti.com> [191211 06:03]:
> > This patch series adds the needed clkctrl and ty-sysc nodes for CAL module.
> > It also adds support for the module in related dtsi and dts for DRA72,
> > DRA76 and AM654 SoC.
> 
> Applying these into omap-for-v5.6/ti-sysc-dt-cam on top of Tero's
> for-5.6-ti-clk branch. It might be too later for v5.6, but we'll
> see.

Actually I'll leave out the k3-am65 dts changes as I don't see
acks for those. Tero can pick up those later.

Regards,

Tony
Tero Kristo Jan. 24, 2020, 7:21 a.m. UTC | #3
On 23/01/2020 19:26, Tony Lindgren wrote:
> * Tony Lindgren <tony@atomide.com> [200123 17:18]:
>> * Benoit Parrot <bparrot@ti.com> [191211 06:03]:
>>> This patch series adds the needed clkctrl and ty-sysc nodes for CAL module.
>>> It also adds support for the module in related dtsi and dts for DRA72,
>>> DRA76 and AM654 SoC.
>>
>> Applying these into omap-for-v5.6/ti-sysc-dt-cam on top of Tero's
>> for-5.6-ti-clk branch. It might be too later for v5.6, but we'll
>> see.
> 
> Actually I'll leave out the k3-am65 dts changes as I don't see
> acks for those. Tero can pick up those later.
> 
> Regards,
> 
> Tony
> 

Right, I think I also missed the cal clkctrl patch in this series. This 
series is imho applying against too many different trees (three if I am 
not mistaken) and should be split up to avoid confusion / not to get 
lost in mailboxes.

-Tero
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Tero Kristo Jan. 24, 2020, 7:25 a.m. UTC | #4
On 24/01/2020 09:21, Tero Kristo wrote:
> On 23/01/2020 19:26, Tony Lindgren wrote:
>> * Tony Lindgren <tony@atomide.com> [200123 17:18]:
>>> * Benoit Parrot <bparrot@ti.com> [191211 06:03]:
>>>> This patch series adds the needed clkctrl and ty-sysc nodes for CAL 
>>>> module.
>>>> It also adds support for the module in related dtsi and dts for DRA72,
>>>> DRA76 and AM654 SoC.
>>>
>>> Applying these into omap-for-v5.6/ti-sysc-dt-cam on top of Tero's
>>> for-5.6-ti-clk branch. It might be too later for v5.6, but we'll
>>> see.
>>
>> Actually I'll leave out the k3-am65 dts changes as I don't see
>> acks for those. Tero can pick up those later.
>>
>> Regards,
>>
>> Tony
>>
> 
> Right, I think I also missed the cal clkctrl patch in this series. This 
> series is imho applying against too many different trees (three if I am 
> not mistaken) and should be split up to avoid confusion / not to get 
> lost in mailboxes.

Not cal clkctrl but the cal k3 patches. I just assumed all dts patches 
in this series were against omaps.

Anyways, I am planning to send k3 dts pull v2 today due to dma patches 
from Peter, so I think I can sneak these also in with that...

-Tero
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki