mbox series

[V6,0/5] Add minimal boot support for IPQ6018

Message ID 1579439601-14810-1-git-send-email-sricharan@codeaurora.org (mailing list archive)
Headers show
Series Add minimal boot support for IPQ6018 | expand

Message

Sricharan Ramabadhran Jan. 19, 2020, 1:13 p.m. UTC 
The IPQ6018 is Qualcomm\u2019s 802.11ax SoC for Routers,
Gateways and Access Points.

This series adds minimal board boot support for ipq6018-cp01 board.

[V6]
 * Addressed more review comments on pinctrl bindings from Rob.
 * Patch 4 arm64: dts: Add ipq6018 SoC and CP01 board support has build
   dependency with,
	https://lkml.org/lkml/2020/1/9/84
[V5]
 * Addressed review comments in pinctrl bindings from Rob.
 * Ran make dt_binding_check with modified patch.
 * Added fixed rate clocks in gcc clock controller node.
 * Patch 4 arm64: dts: Add ipq6018 SoC and CP01 board support has build
   dependency with,
        https://lkml.org/lkml/2020/1/9/84
[v4]
 * Addressed review comments in pinctrl bindings from Rob.
 * Ran make dt_binding_check and no issues was reported.
 * Deleted absahu email id from patch 4, since its bouncing now.
 * Patch 4 arm64: dts: Add ipq6018 SoC and CP01 board support has build
   dependency with,
	https://lkml.org/lkml/2020/1/9/84

[V3]
 * Removed clock driver and bindings from this patch series, and added them
   as a different series.
 * Removed qpic_padN from pinctrl driver.
 * Addressed review comments in dts, and added the remaining fixed clocks their
 * Fixed review comments in pinctrl bindings

[v2]
 * Splitted dt bindings  and driver into different patches. Added missing bindings
   and some style changes.
 * Added ipq6018 schema
 * Addressed review comments for gcc clock bindings.
 * Removed all clk critical flags, removed 1/1 factor clocks, moved to new
   way of specifying clk parents, and addressed other review comments.
 * Sorted nodes based on address, name, label. Removed unused clock nodes,
   Addressed other review comments.

Sricharan R (5):
  dt-bindings: pinctrl: qcom: Add ipq6018 pinctrl bindings
  pinctrl: qcom: Add ipq6018 pinctrl driver
  dt-bindings: qcom: Add ipq6018 bindings
  arm64: dts: Add ipq6018 SoC and CP01 board support
  arm64: defconfig: Enable qcom ipq6018 clock and pinctrl

 Documentation/devicetree/bindings/arm/qcom.yaml    |    8 +
 .../bindings/pinctrl/qcom,ipq6018-pinctrl.yaml     |  174 +++
 arch/arm64/boot/dts/qcom/Makefile                  |    1 +
 arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts       |   30 +
 arch/arm64/boot/dts/qcom/ipq6018.dtsi              |  263 +++++
 arch/arm64/configs/defconfig                       |    3 +
 drivers/pinctrl/qcom/Kconfig                       |   10 +
 drivers/pinctrl/qcom/Makefile                      |    1 +
 drivers/pinctrl/qcom/pinctrl-ipq6018.c             | 1107 ++++++++++++++++++++
 9 files changed, 1597 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
 create mode 100644 arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
 create mode 100644 arch/arm64/boot/dts/qcom/ipq6018.dtsi
 create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq6018.c

Comments

Linus Walleij Feb. 14, 2020, 10:19 a.m. UTC | #1 
On Sun, Jan 19, 2020 at 2:13 PM Sricharan R <sricharan@codeaurora.org> wrote:

> The IPQ6018 is Qualcomm\u2019s 802.11ax SoC for Routers,
> Gateways and Access Points.
>
> This series adds minimal board boot support for ipq6018-cp01 board.
>
> [V6]
>  * Addressed more review comments on pinctrl bindings from Rob.
>  * Patch 4 arm64: dts: Add ipq6018 SoC and CP01 board support has build
>    dependency with,
>         https://lkml.org/lkml/2020/1/9/84

I have applied patches 1 & 2 and the remaining patches can be
applied to the ARM SoC-relavent tree (Bjorn can handle this I think?)

I am sorry it didn't make it into v5.6, this is caused by the bottleneck
for YAML schema review, we would appreciate more people
participating in writing and reviewing new schemas, we are currently
in a bit of learning phase.

Yours,
Linus Walleij