mbox series

[v4,0/2] ACPI: APEI: Add support to notify the vendor specific HW errors

Message ID 20200207103143.20104-1-shiju.jose@huawei.com (mailing list archive)
Headers show
Series ACPI: APEI: Add support to notify the vendor specific HW errors | expand

Message

Shiju Jose Feb. 7, 2020, 10:31 a.m. UTC
Presently the vendor drivers are unable to do the recovery for the
vendor specific recoverable HW errors, reported to the APEI driver
in the vendor defined sections, because APEI driver does not support
reporting the same to the vendor drivers.

This patch set
1. add an interface to the APEI driver to enable the vendor
drivers to register the event handling functions for the corresponding
vendor specific HW errors and report the error to the vendor driver.

2. add driver to handle HiSilicon hip08 PCIe controller's errors
   which is an example application of the above APEI interface.

Changes:

V4:
1. Fix for the smatch warning in the PCIe error driver:
   warn: should '((((1))) << (9 + i))' be a 64 bit type?
   if (err->val_bits & BIT(HISI_PCIE_LOCAL_VALID_ERR_MISC + i))
	^^^ This should be BIT_ULL() because it goes up to 9 + 32.

V3:
1. Fix the comments from Bjorn Helgaas.

V2:
1. Changes in the HiSilicon PCIe controller's error handling driver
   for the comments from Bjorn Helgaas.
   
2. Changes in the APEI interface to support reporting the vendor error
   for module with multiple devices, but use the same section type.
   In the error handler will use socket id/sub module id etc to distinguish
   the device.

V1:  
1. Fix comments from James Morse.

2. add driver to handle HiSilicon hip08 PCIe controller's errors,
   which is an application of the above interface.

Shiju Jose (1):
  ACPI: APEI: Add support to notify the vendor specific HW errors

Yicong Yang (1):
  PCI: HIP: Add handling of HiSilicon HIP PCIe controller errors

 drivers/acpi/apei/ghes.c                 | 116 ++++++++++-
 drivers/pci/controller/Kconfig           |   8 +
 drivers/pci/controller/Makefile          |   1 +
 drivers/pci/controller/pcie-hisi-error.c | 334 +++++++++++++++++++++++++++++++
 include/acpi/ghes.h                      |  56 ++++++
 5 files changed, 510 insertions(+), 5 deletions(-)
 create mode 100644 drivers/pci/controller/pcie-hisi-error.c

Comments

Shiju Jose March 9, 2020, 9:23 a.m. UTC | #1
Hi All,

Gentle reminder on this patch set.

Thanks,
Shiju

>-----Original Message-----
>From: linux-acpi-owner@vger.kernel.org [mailto:linux-acpi-
>owner@vger.kernel.org] On Behalf Of Shiju Jose
>Sent: 07 February 2020 10:32
>To: linux-acpi@vger.kernel.org; linux-pci@vger.kernel.org; linux-
>kernel@vger.kernel.org; rjw@rjwysocki.net; helgaas@kernel.org;
>lenb@kernel.org; bp@alien8.de; james.morse@arm.com; tony.luck@intel.com;
>gregkh@linuxfoundation.org; zhangliguang@linux.alibaba.com;
>tglx@linutronix.de
>Cc: Linuxarm <linuxarm@huawei.com>; Jonathan Cameron
><jonathan.cameron@huawei.com>; tanxiaofei <tanxiaofei@huawei.com>;
>yangyicong <yangyicong@huawei.com>; Shiju Jose <shiju.jose@huawei.com>
>Subject: [PATCH v4 0/2] ACPI: APEI: Add support to notify the vendor specific
>HW errors
>
>Presently the vendor drivers are unable to do the recovery for the vendor
>specific recoverable HW errors, reported to the APEI driver in the vendor
>defined sections, because APEI driver does not support reporting the same to
>the vendor drivers.
>
>This patch set
>1. add an interface to the APEI driver to enable the vendor drivers to register
>the event handling functions for the corresponding vendor specific HW errors
>and report the error to the vendor driver.
>
>2. add driver to handle HiSilicon hip08 PCIe controller's errors
>   which is an example application of the above APEI interface.
>
>Changes:
>
>V4:
>1. Fix for the smatch warning in the PCIe error driver:
>   warn: should '((((1))) << (9 + i))' be a 64 bit type?
>   if (err->val_bits & BIT(HISI_PCIE_LOCAL_VALID_ERR_MISC + i))
>	^^^ This should be BIT_ULL() because it goes up to 9 + 32.
>
>V3:
>1. Fix the comments from Bjorn Helgaas.
>
>V2:
>1. Changes in the HiSilicon PCIe controller's error handling driver
>   for the comments from Bjorn Helgaas.
>
>2. Changes in the APEI interface to support reporting the vendor error
>   for module with multiple devices, but use the same section type.
>   In the error handler will use socket id/sub module id etc to distinguish
>   the device.
>
>V1:
>1. Fix comments from James Morse.
>
>2. add driver to handle HiSilicon hip08 PCIe controller's errors,
>   which is an application of the above interface.
>
>Shiju Jose (1):
>  ACPI: APEI: Add support to notify the vendor specific HW errors
>
>Yicong Yang (1):
>  PCI: HIP: Add handling of HiSilicon HIP PCIe controller errors
>
> drivers/acpi/apei/ghes.c                 | 116 ++++++++++-
> drivers/pci/controller/Kconfig           |   8 +
> drivers/pci/controller/Makefile          |   1 +
> drivers/pci/controller/pcie-hisi-error.c | 334
>+++++++++++++++++++++++++++++++
> include/acpi/ghes.h                      |  56 ++++++
> 5 files changed, 510 insertions(+), 5 deletions(-)  create mode 100644
>drivers/pci/controller/pcie-hisi-error.c
>
>--
>1.9.1
>
James Morse March 11, 2020, 5:27 p.m. UTC | #2
Hi Shiju,

On 09/03/2020 09:23, Shiju Jose wrote:
> Gentle reminder on this patch set.

Your cover-letter has:
| X-Mailer: git-send-email 2.19.2.windows.1
| In-Reply-To: <Shiju Jose>
| References: <Shiju Jose>

Which causes my mail client to thread this with year-old mail ... hence I've only just
seen this. Other people may have the same problem.
If you're feeding these headers into git-send-email, it expects the value from the
original message's 'Message-Id'... but you don't want this for a cover letter!


Thanks,

James