[RESEND,0/5] Support the Allwinner F1C100s USB stack

Message

George Hilliard March 9, 2020, 8:43 p.m. UTC

The Allwinner F1C100s has an MUSB-based USB peripheral.  This patch
series implements support for it alongside existing Allwinner support
code.

This series was originally written by Icenowy Zheng for Linux v4.14.
I've rebased and bugfixed that work against mainline and tested it on
both the Lichee Nano and my custom hardware.

This resubmit is unchanged from the series I sent a couple weeks ago,
although I've expanded the Cc: to the linux-usb list.

George Hilliard (3):
  dt-bindings: Add new F1C100s compatible strings for USB
  phy: sun4i-usb: add support for the USB PHY on suniv SoC
  musb: sunxi: add support for the suniv MUSB controller

Icenowy Zheng (2):
  ARM: suniv: add USB-related device nodes
  ARM: suniv: f1c100s: enable USB on Lichee Pi Nano

 .../phy/allwinner,sun4i-a10-usb-phy.yaml      |  1 +
 .../usb/allwinner,sun4i-a10-musb.yaml         |  1 +
 .../boot/dts/suniv-f1c100s-licheepi-nano.dts  | 16 ++++++++++
 arch/arm/boot/dts/suniv-f1c100s.dtsi          | 29 +++++++++++++++++++
 drivers/phy/allwinner/phy-sun4i-usb.c         | 11 +++++++
 drivers/usb/musb/sunxi.c                      |  8 +++--
 6 files changed, 64 insertions(+), 2 deletions(-)