mbox series

[v2,0/2] media: staging: rkisp1: allow simultaneous streaming from multiple capture devices

Message ID 20200316210044.595312-1-helen.koike@collabora.com (mailing list archive)
Headers show
Series media: staging: rkisp1: allow simultaneous streaming from multiple capture devices | expand

Message

Helen Koike March 16, 2020, 9 p.m. UTC
Hi,

This series adds support for simultaneous streaming from both capture
devices (rkisp1_selfpath and rkisp1_mainpath).

It depends on the following series for multistream to work properly, but
it doesn't mean it can't be merged before:

	"media: add v4l2_pipeline_stream_{enable,disable} helpers"
	https://patchwork.linuxtv.org/cover/62233/

And it is also available at:

	https://gitlab.collabora.com/koike/linux/tree/rockchip/isp/multistream

Patch 1/2 fixes return error handling from pm functions, which was
preventing the second stream to start.

Patch 2/2 serializes start/stop streaming calls, since they both
and modify shared variables.

Changes in v2:
- Rebased on media/master
- Removed the following patch from the series:
"media: staging: rkisp1: do not call s_stream if the entity is still in use"
It was replaced by "media: add v4l2_pipeline_stream_{enable,disable} helpers"
https://patchwork.linuxtv.org/cover/62233/

This series was tested with:
============================

SEN_DEV=/dev/v4l-subdev3
ISP_DEV=/dev/v4l-subdev0
RSZ_SP_DEV=/dev/v4l-subdev2
RSZ_MP_DEV=/dev/v4l-subdev1
CAP_SP_DEV=/dev/video1
CAP_MP_DEV=/dev/video0

WIDTH=1920
HEIGHT=1080
RAW_CODE=SRGGB10_1X10
YUV_CODE=YUYV8_2X8

v4l2-ctl --set-subdev-fmt pad=0,width=$WIDTH,height=$HEIGHT,code=$RAW_CODE -d $SEN_DEV

v4l2-ctl --set-subdev-fmt pad=0,width=$WIDTH,height=$HEIGHT,code=$RAW_CODE -d $ISP_DEV
v4l2-ctl --set-subdev-selection pad=0,target=crop,top=0,left=0,width=$WIDTH,height=$HEIGHT -d $ISP_DEV

v4l2-ctl --set-subdev-selection pad=2,target=crop,top=0,left=0,width=$WIDTH,height=$HEIGHT -d $ISP_DEV
v4l2-ctl --set-subdev-fmt pad=2,width=$WIDTH,height=$HEIGHT,code=$YUV_CODE -d $ISP_DEV

v4l2-ctl --set-subdev-fmt pad=0,width=$WIDTH,height=$HEIGHT,code=$YUV_CODE -d $RSZ_SP_DEV
v4l2-ctl --set-subdev-fmt pad=1,width=$WIDTH,height=$HEIGHT,code=$YUV_CODE -d $RSZ_SP_DEV

v4l2-ctl --set-subdev-selection pad=0,target=crop,top=0,left=0,width=$WIDTH,height=$HEIGHT -d $RSZ_SP_DEV

v4l2-ctl --set-subdev-fmt pad=0,width=$WIDTH,height=$HEIGHT,code=$YUV_CODE -d $RSZ_MP_DEV
v4l2-ctl --set-subdev-fmt pad=1,width=$WIDTH,height=$HEIGHT,code=$YUV_CODE -d $RSZ_MP_DEV

v4l2-ctl --set-subdev-selection pad=0,target=crop,top=0,left=0,width=$WIDTH,height=$HEIGHT -d $RSZ_MP_DEV

v4l2-ctl -v width=$WIDTH,height=$HEIGHT,pixelformat=NV12 -d $CAP_SP_DEV
v4l2-ctl -v width=$WIDTH,height=$HEIGHT,pixelformat=NV12 -d $CAP_MP_DEV

sleep 1

v4l2-ctl --stream-mmap --stream-count=100 -d $CAP_SP_DEV --stream-to=/tmp/test_sp.raw &
v4l2-ctl --stream-mmap --stream-count=100 -d $CAP_MP_DEV --stream-to=/tmp/test_mp.raw &

wait
echo "Completed"

Helen Koike (2):
  media: staging: rkisp1: cap: fix return values from pm functions
  media: staging: rkisp1: cap: serialize start/stop stream

 drivers/staging/media/rkisp1/rkisp1-capture.c | 13 +++++++++++--
 drivers/staging/media/rkisp1/rkisp1-common.h  |  2 ++
 drivers/staging/media/rkisp1/rkisp1-dev.c     |  2 ++
 3 files changed, 15 insertions(+), 2 deletions(-)

Comments

Tomasz Figa June 10, 2020, 4:37 p.m. UTC | #1
On Mon, Mar 16, 2020 at 06:00:42PM -0300, Helen Koike wrote:
> Hi,
> 
> This series adds support for simultaneous streaming from both capture
> devices (rkisp1_selfpath and rkisp1_mainpath).
> 
> It depends on the following series for multistream to work properly, but
> it doesn't mean it can't be merged before:
> 
> 	"media: add v4l2_pipeline_stream_{enable,disable} helpers"
> 	https://patchwork.linuxtv.org/cover/62233/
> 
> And it is also available at:
> 
> 	https://gitlab.collabora.com/koike/linux/tree/rockchip/isp/multistream
> 
> Patch 1/2 fixes return error handling from pm functions, which was
> preventing the second stream to start.
> 
> Patch 2/2 serializes start/stop streaming calls, since they both
> and modify shared variables.
> 
> Changes in v2:
> - Rebased on media/master
> - Removed the following patch from the series:
> "media: staging: rkisp1: do not call s_stream if the entity is still in use"
> It was replaced by "media: add v4l2_pipeline_stream_{enable,disable} helpers"
> https://patchwork.linuxtv.org/cover/62233/
> 

For the whole series:

Reviewed-by: Tomasz Figa <tfiga@chromium.org>

Best regards,
Tomasz