| Message ID | 20200320131256.23294-1-p.zabel@pengutronix.de (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add initial i.MX8MQ support | expand |
Hi Philipp, Tested on the EVK, looks great. On Fri, 2020-03-20 at 14:12 +0100, Philipp Zabel wrote: > With the i.MX8MQ decoders in active use and the i.MX8MM power domain > support still up in the air, I think it makes sense to merge i.MX8MQ > Hantro support now and accept that i.MX8MM may or may not require > different bindings. > > Patch 4 depends on [2] for the MAINTAINERS change. > Thanks a lot for stepping up and helping to maintain the driver! For all patches: Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com> > Changes since v5 [1]: > - Drop merged patches > - Drop i.MX8MM bindings > - Change example node name to video-codec > - Convert i.MX8MQ bindings to YAML > - Drop i.MX8MM support > - Rebase onto media/master > - Enable h.264 and VP8 decoding > - Enable post-processing > > [1] https://lore.kernel.org/linux-media/20190612093915.18973-1-p.zabel@pengutronix.de > [2] https://lore.kernel.org/linux-media/20200318132108.21873-9-ezequiel@collabora.com > > regards > Philipp > > Philipp Zabel (4): > media: dt-bindings: Document i.MX8MQ VPU bindings > media: hantro: add initial i.MX8MQ support > arm64: dts: imx8mq: enable Hantro G1/G2 VPU > media: MAINTAINERS: add myself to co-maintain Hantro G1/G2 for i.MX8MQ > > .../bindings/media/nxp,imx8mq-vpu.yaml | 77 ++++++ > MAINTAINERS | 2 + > arch/arm64/boot/dts/freescale/imx8mq.dtsi | 27 +++ > drivers/staging/media/hantro/Kconfig | 16 +- > drivers/staging/media/hantro/Makefile | 3 + > drivers/staging/media/hantro/hantro_drv.c | 3 + > drivers/staging/media/hantro/hantro_hw.h | 1 + > drivers/staging/media/hantro/imx8m_vpu_hw.c | 220 ++++++++++++++++++ > 8 files changed, 345 insertions(+), 4 deletions(-) > create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml > create mode 100644 drivers/staging/media/hantro/imx8m_vpu_hw.c >