[v3,0/3] Add support to handle targets without TrustZone
mbox series

Message ID 1586971906-20985-1-git-send-email-pillair@codeaurora.org
Headers show
Series
  • Add support to handle targets without TrustZone
Related show

Message

Rakesh Pillai April 15, 2020, 5:31 p.m. UTC
The iommu mapping for S2 SIDs are taken care by TrustZone.
For the targets which does not have the support of TrustZone,
these mappings need to be created in the driver using an
iommu domain.

Leaving these SIDs unconfigured will result in a global
smmu fault. Hence configuring them for Non-TrustZone targets
is mandatory.

Changes from v2:
- Correct the name of the firmware structure added in ath10k

Rakesh Pillai (3):
  dt-bindings: ath10k: Add wifi-firmware subnode for wifi node
  ath10k: Setup the msa resources before qmi init
  ath10k: Add support for targets without trustzone

 .../bindings/net/wireless/qcom,ath10k.txt          |  14 ++
 drivers/net/wireless/ath/ath10k/core.h             |   5 +
 drivers/net/wireless/ath/ath10k/qmi.c              |  61 +------
 drivers/net/wireless/ath/ath10k/qmi.h              |   3 -
 drivers/net/wireless/ath/ath10k/snoc.c             | 182 ++++++++++++++++++++-
 drivers/net/wireless/ath/ath10k/snoc.h             |   7 +
 6 files changed, 208 insertions(+), 64 deletions(-)