[v2,0/4] ath10k: sdio: add support for rx/tx bitrate reporting
mbox series

Message ID 20200427080416.8265-1-wgong@codeaurora.org
Headers show
Series
  • ath10k: sdio: add support for rx/tx bitrate reporting
Related show

Message

Wen Gong April 27, 2020, 8:04 a.m. UTC
v2: rebased to ath-next of 04/27

iw wlan0 link/iw wlan0 station dump show the wrong bitrate for rx/tx.
wrong example:
rx bitrate: 6.0 MBit/s
tx bitrate: 2.8 MBit/s

These patches correct them.
rx bitrate: 234.0 MBit/s VHT-MCS 3 80MHz VHT-NSS 2
rx bitrate: 40.5 MBit/s MCS 2 40MHz
rx bitrate: 72.2 MBit/s MCS 7 short GI
rx bitrate: 54.0 MBit/s
rx bitrate: 48.0 MBit/s

tx bitrate: 54.0 MBit/s

Wen Gong (4):
  ath10k: enable firmware peer stats info for wmi tlv
  ath10k: add rx bitrate report for SDIO
  ath10k: add bitrate parse for peer stats info
  ath10k: correct tx bitrate of iw for SDIO

 drivers/net/wireless/ath/ath10k/core.c    |   2 +
 drivers/net/wireless/ath/ath10k/core.h    |  25 +++
 drivers/net/wireless/ath/ath10k/hw.h      |   3 +
 drivers/net/wireless/ath/ath10k/mac.c     | 216 ++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-ops.h |  30 +++
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 121 ++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.h | 110 +++++++++++
 drivers/net/wireless/ath/ath10k/wmi.h     |   9 +
 8 files changed, 516 insertions(+)