[v3,0/5] Qualcomm labibb regulator driver

Message

Sumit Semwal May 28, 2020, 3:46 p.m. UTC

This series adds a driver for LAB/IBB regulators found on some Qualcomm SoCs.
These regulators provide positive and/or negative boost power supplies
for LCD/LED display panels connected to the SoC.

This series adds the support for pmi8998 PMIC found in SDM845 family of SoCs.

Changes from v2:
- Review comments from v2
- Moved the poll-to-check-enabled functionality to regulator core.
- Used more core features to simplify enable/disable functions.
- Moved the devicetree binding to yaml.
- Updated interrupt-names and simplified handling.

Changes from v1:
- Incorporated review comments from v1
- Changed from virtual-regulator based handling to individual regulator based
  handling.
- Reworked the core to merge most of enable/disable functions, combine the
  regulator_ops into one and allow for future variations.
- is_enabled() is now _really_ is_enabled()
- Simplified the SC interrupt handling - use regmap_read_poll_timeout,
  REGULATOR_EVENT_OVER_CURRENT handling and notification to clients.

Nisha Kumari (4):
  dt-bindings: regulator: Add labibb regulator
  arm64: dts: qcom: pmi8998: Add nodes for LAB and IBB regulators
  regulator: qcom: Add labibb driver
  regulator: qcom: labibb: Add SC interrupt handling

Sumit Semwal (1):
  regulator: Allow regulators to verify enabled during enable()

 .../regulator/qcom-labibb-regulator.yaml      |  63 ++++
 arch/arm64/boot/dts/qcom/pmi8998.dtsi         |  14 +
 drivers/regulator/Kconfig                     |  10 +
 drivers/regulator/Makefile                    |   1 +
 drivers/regulator/core.c                      |  28 ++
 drivers/regulator/qcom-labibb-regulator.c     | 316 ++++++++++++++++++
 include/linux/regulator/driver.h              |   5 +
 7 files changed, 437 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
 create mode 100644 drivers/regulator/qcom-labibb-regulator.c