[v2,0/3] pinctrl: single: support #pinctrl-cells = 2
mbox series

Message ID 20200619090608.94948-1-drew@beagleboard.org
Headers show
Series
  • pinctrl: single: support #pinctrl-cells = 2
Related show

Message

Drew Fustini June 19, 2020, 9:06 a.m. UTC
Currently, pinctrl-single only allows #pinctrl-cells = 1.

This series will allow pinctrl-single to also support #pinctrl-cells = 2

If "pinctrl-single,pins" has 3 arguments (offset, conf, mux) then
pcs_parse_one_pinctrl_entry() does an OR operation on to get the
value to store in the register.
    
To take advantage of #pinctrl-cells = 2, the AM33XX_PADCONF macro in
omap.h is modified to keep pin conf and pin mux values separate.

v2 changes:
- remove outer parentheses from AM33XX_PADCONF macro as it causes a
  compile error in dtc.  I had added it per suggestion from checkpatch
  about having parentheses around complex values.

Drew Fustini (3):
  ARM: dts: change AM33XX_PADCONF macro separate conf and mux
  ARM: dts: am33xx-l4: change #pinctrl-cells from 1 to 2
  pinctrl: single: parse #pinctrl-cells = 2

 arch/arm/boot/dts/am33xx-l4.dtsi   |  2 +-
 drivers/pinctrl/pinctrl-single.c   | 11 +++++++++--
 include/dt-bindings/pinctrl/omap.h |  2 +-
 3 files changed, 11 insertions(+), 4 deletions(-)