[1/6] ARM: dts: DRA72: Add CAL dtsi node
diff mbox

Message ID 20171012192719.15193-2-bparrot@ti.com
State New
Headers show

Commit Message

Benoit Parrot Oct. 12, 2017, 7:27 p.m. UTC
This patch adds the required dtsi node to support the Camera
Adaptation Layer (CAL) for the DRA72 family of devices.

- Added CAL entry in dra72x.dtsi.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 arch/arm/boot/dts/dra72x.dtsi | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

Comments

Tony Lindgren Oct. 13, 2017, 4:54 p.m. UTC | #1
* Benoit Parrot <bparrot@ti.com> [171012 12:29]:
> This patch adds the required dtsi node to support the Camera
> Adaptation Layer (CAL) for the DRA72 family of devices.
> 
> - Added CAL entry in dra72x.dtsi.
> 
> Signed-off-by: Benoit Parrot <bparrot@ti.com>
> ---
>  arch/arm/boot/dts/dra72x.dtsi | 31 +++++++++++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
> index 67107605fb4c..d0ba4f238084 100644
> --- a/arch/arm/boot/dts/dra72x.dtsi
> +++ b/arch/arm/boot/dts/dra72x.dtsi
> @@ -17,6 +17,37 @@
>  		interrupt-parent = <&wakeupgen>;
>  		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
>  	};
> +
> +	ocp {
> +		cal: cal@4845b000 {
> +			compatible = "ti,dra72-cal";
> +			ti,hwmods = "cal";
> +			reg = <0x4845B000 0x400>,
> +			      <0x4845B800 0x40>,
> +			      <0x4845B900 0x40>,
> +			      <0x4A002e94 0x4>;

Care to fix the cAmelcasing here? All lower case hex is pretty much the
standard with linux, so might as well lower case them all while at it.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Benoit Parrot Oct. 13, 2017, 4:55 p.m. UTC | #2
Tony Lindgren <tony@atomide.com> wrote on Fri [2017-Oct-13 09:54:09 -0700]:
> * Benoit Parrot <bparrot@ti.com> [171012 12:29]:
> > This patch adds the required dtsi node to support the Camera
> > Adaptation Layer (CAL) for the DRA72 family of devices.
> > 
> > - Added CAL entry in dra72x.dtsi.
> > 
> > Signed-off-by: Benoit Parrot <bparrot@ti.com>
> > ---
> >  arch/arm/boot/dts/dra72x.dtsi | 31 +++++++++++++++++++++++++++++++
> >  1 file changed, 31 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
> > index 67107605fb4c..d0ba4f238084 100644
> > --- a/arch/arm/boot/dts/dra72x.dtsi
> > +++ b/arch/arm/boot/dts/dra72x.dtsi
> > @@ -17,6 +17,37 @@
> >  		interrupt-parent = <&wakeupgen>;
> >  		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
> >  	};
> > +
> > +	ocp {
> > +		cal: cal@4845b000 {
> > +			compatible = "ti,dra72-cal";
> > +			ti,hwmods = "cal";
> > +			reg = <0x4845B000 0x400>,
> > +			      <0x4845B800 0x40>,
> > +			      <0x4845B900 0x40>,
> > +			      <0x4A002e94 0x4>;
> 
> Care to fix the cAmelcasing here? All lower case hex is pretty much the
> standard with linux, so might as well lower case them all while at it.

Sure thing, I'll fix it.

Benoit

> 
> Regards,
> 
> Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch
diff mbox

diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
index 67107605fb4c..d0ba4f238084 100644
--- a/arch/arm/boot/dts/dra72x.dtsi
+++ b/arch/arm/boot/dts/dra72x.dtsi
@@ -17,6 +17,37 @@ 
 		interrupt-parent = <&wakeupgen>;
 		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 	};
+
+	ocp {
+		cal: cal@4845b000 {
+			compatible = "ti,dra72-cal";
+			ti,hwmods = "cal";
+			reg = <0x4845B000 0x400>,
+			      <0x4845B800 0x40>,
+			      <0x4845B900 0x40>,
+			      <0x4A002e94 0x4>;
+			reg-names = "cal_top",
+				    "cal_rx_core0",
+				    "cal_rx_core1",
+				    "camerrx_control";
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi2_0: port@0 {
+					reg = <0>;
+				};
+				csi2_1: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+	};
 };
 
 &dss {