@@ -397,6 +397,8 @@ enum intel_display_power_domain {
POWER_DOMAIN_AUX_B,
POWER_DOMAIN_AUX_C,
POWER_DOMAIN_AUX_D,
+ POWER_DOMAIN_AUX_F,
+
POWER_DOMAIN_GMBUS,
POWER_DOMAIN_MODESET,
POWER_DOMAIN_INIT,
@@ -1667,6 +1669,7 @@ enum modeset_restore {
#define DP_AUX_B 0x10
#define DP_AUX_C 0x20
#define DP_AUX_D 0x30
+#define DP_AUX_F 0x50
#define DDC_PIN_B 0x05
#define DDC_PIN_C 0x04
@@ -2569,6 +2569,9 @@ gen8_de_irq_handler(struct drm_i915_private *dev_priv, u32 master_ctl)
GEN9_AUX_CHANNEL_C |
GEN9_AUX_CHANNEL_D;
+ if (IS_CANNONLAKE(dev_priv))
+ tmp_mask |= CNL_AUX_CHANNEL_F;
+
if (iir & tmp_mask) {
dp_aux_irq_handler(dev_priv);
found = true;
@@ -3601,6 +3604,9 @@ static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv)
de_pipe_masked |= GEN8_DE_PIPE_IRQ_FAULT_ERRORS;
}
+ if (IS_CANNONLAKE(dev_priv))
+ de_port_masked |= CNL_AUX_CHANNEL_F;
+
de_pipe_enables = de_pipe_masked | GEN8_PIPE_VBLANK |
GEN8_PIPE_FIFO_UNDERRUN;
@@ -1277,6 +1277,7 @@ enum i915_power_well_id {
CNL_DISP_PW_AUX_B = GLK_DISP_PW_AUX_B,
CNL_DISP_PW_AUX_C = GLK_DISP_PW_AUX_C,
CNL_DISP_PW_AUX_D,
+ CNL_DISP_PW_AUX_F = 13,
SKL_DISP_PW_1 = 14,
SKL_DISP_PW_2,
@@ -5229,6 +5230,13 @@ enum {
#define _DPD_AUX_CH_DATA4 (dev_priv->info.display_mmio_offset + 0x64320)
#define _DPD_AUX_CH_DATA5 (dev_priv->info.display_mmio_offset + 0x64324)
+#define _DPF_AUX_CH_CTL (dev_priv->info.display_mmio_offset + 0x64510)
+#define _DPF_AUX_CH_DATA1 (dev_priv->info.display_mmio_offset + 0x64514)
+#define _DPF_AUX_CH_DATA2 (dev_priv->info.display_mmio_offset + 0x64518)
+#define _DPF_AUX_CH_DATA3 (dev_priv->info.display_mmio_offset + 0x6451c)
+#define _DPF_AUX_CH_DATA4 (dev_priv->info.display_mmio_offset + 0x64520)
+#define _DPF_AUX_CH_DATA5 (dev_priv->info.display_mmio_offset + 0x64524)
+
#define DP_AUX_CH_CTL(port) _MMIO_PORT(port, _DPA_AUX_CH_CTL, _DPB_AUX_CH_CTL)
#define DP_AUX_CH_DATA(port, i) _MMIO(_PORT(port, _DPA_AUX_CH_DATA1, _DPB_AUX_CH_DATA1) + (i) * 4) /* 5 registers */
@@ -6880,6 +6888,7 @@ enum {
#define GEN8_DE_PORT_IMR _MMIO(0x44444)
#define GEN8_DE_PORT_IIR _MMIO(0x44448)
#define GEN8_DE_PORT_IER _MMIO(0x4444c)
+#define CNL_AUX_CHANNEL_F (1 << 28)
#define GEN9_AUX_CHANNEL_D (1 << 27)
#define GEN9_AUX_CHANNEL_C (1 << 26)
#define GEN9_AUX_CHANNEL_B (1 << 25)
@@ -1324,6 +1324,9 @@ static enum port intel_aux_port(struct drm_i915_private *dev_priv,
case DP_AUX_D:
aux_port = PORT_D;
break;
+ case DP_AUX_F:
+ aux_port = PORT_F;
+ break;
default:
MISSING_CASE(info->alternate_aux_channel);
aux_port = PORT_A;
@@ -1343,6 +1346,7 @@ static i915_reg_t g4x_aux_ctl_reg(struct drm_i915_private *dev_priv,
case PORT_B:
case PORT_C:
case PORT_D:
+ case PORT_F:
return DP_AUX_CH_CTL(port);
default:
MISSING_CASE(port);
@@ -1357,6 +1361,7 @@ static i915_reg_t g4x_aux_data_reg(struct drm_i915_private *dev_priv,
case PORT_B:
case PORT_C:
case PORT_D:
+ case PORT_F:
return DP_AUX_CH_DATA(port, index);
default:
MISSING_CASE(port);
@@ -5980,6 +5985,9 @@ intel_dp_init_connector_port_info(struct intel_digital_port *intel_dig_port)
/* FIXME: Check VBT for actual wiring of PORT E */
intel_dp->aux_power_domain = POWER_DOMAIN_AUX_D;
break;
+ case PORT_F:
+ intel_dp->aux_power_domain = POWER_DOMAIN_AUX_F;
+ break;
default:
MISSING_CASE(intel_dig_port->port);
}
@@ -124,6 +124,8 @@ intel_display_power_domain_str(enum intel_display_power_domain domain)
return "AUX_C";
case POWER_DOMAIN_AUX_D:
return "AUX_D";
+ case POWER_DOMAIN_AUX_F:
+ return "AUX_F";
case POWER_DOMAIN_GMBUS:
return "GMBUS";
case POWER_DOMAIN_INIT:
@@ -1829,6 +1831,9 @@ void intel_display_power_put(struct drm_i915_private *dev_priv,
#define CNL_DISPLAY_AUX_D_POWER_DOMAINS ( \
BIT_ULL(POWER_DOMAIN_AUX_D) | \
BIT_ULL(POWER_DOMAIN_INIT))
+#define CNL_DISPLAY_AUX_F_POWER_DOMAINS ( \
+ BIT_ULL(POWER_DOMAIN_AUX_F) | \
+ BIT_ULL(POWER_DOMAIN_INIT))
#define CNL_DISPLAY_DC_OFF_POWER_DOMAINS ( \
CNL_DISPLAY_POWERWELL_2_POWER_DOMAINS | \
BIT_ULL(POWER_DOMAIN_MODESET) | \
@@ -2378,6 +2383,12 @@ static struct i915_power_well cnl_power_wells[] = {
.ops = &hsw_power_well_ops,
.id = SKL_DISP_PW_DDI_D,
},
+ {
+ .name = "AUX F",
+ .domains = CNL_DISPLAY_AUX_F_POWER_DOMAINS,
+ .ops = &hsw_power_well_ops,
+ .id = CNL_DISP_PW_AUX_F,
+ },
};
static int
On some Cannonlake SKUs we have a dedicated Aux for port F, that is only the full split between port A and port E. There is still no Aux E for Port E, as in previous platforms, because port_E still means shared lanes with port A. v2: Rebase. v3: Add couple missed PORT_F cases on intel_dp. v4: Rebase and fix commit message. v5: Squash Imre's "drm/i915: Add missing AUX_F power well string" Cc: Imre Deak <imre.deak@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> --- drivers/gpu/drm/i915/i915_drv.h | 3 +++ drivers/gpu/drm/i915/i915_irq.c | 6 ++++++ drivers/gpu/drm/i915/i915_reg.h | 9 +++++++++ drivers/gpu/drm/i915/intel_dp.c | 8 ++++++++ drivers/gpu/drm/i915/intel_runtime_pm.c | 11 +++++++++++ 5 files changed, 37 insertions(+)